Dell Vostro 1540/1550 Használati útmutató Szabályozó modell P18F Szabályozó típus P18F001,P18F002
Megjegyzések, figyelmeztetések és vigyázat jelzések MEGJEGYZÉS: A MEGJEGYZÉSEK fontos tudnivalókat tartalmaznak, amelyek a számítógép biztonságosabb és hatékonyabb használatát segítik. FIGYELMEZTETÉS: A FIGYELMEZTETÉSEK az utasítások be nem tartása esetén esetlegesen bekövetkező hardversérülés vagy adatvesztés veszélyére hívják fel a figyelmet. VIGYÁZAT: A VIGYÁZAT jelzés az esetleges tárgyi vagy személyi sérülés, illetve életveszély lehetőségére hívja fel a figyelmet.
Tartalomjegyzék Megjegyzések, figyelmeztetések és vigyázat jelzések.......................2 1: fejezetMunka a számítógép belsejében........................................7 Mielőtt elkezdene dolgozni a számítógép belsejében.......................................................7 Ajánlott szerszámok....................................................................................................9 A számítógép kikapcsolása......................................................................................
9: fejezetA bekapcsológomb panel eltávolítása..............................27 A bekapcsológomb panel beszerelése.........................................................................28 10: fejezetA merevlemez-meghajtó eltávolítása.............................31 A merevlemez-meghajtó beszerelése..........................................................................32 11: fejezetA vezeték nélküli helyi hálózati (WLAN) kártya eltávolítása.................................................................
20: fejezetAz egyenáramú bementi port és a tartókeret eltávolítása.........................................................................................59 Az egyenáramú bemeneti port és tartókeret beszerelése...............................................61 21: fejezetA kijelzőelőlap eltávolítása.............................................63 A kijelzőelőlap felszerelése.........................................................................................64 22: fejezetA kamera eltávolítása..........
Munka a számítógép belsejében 1 Mielőtt elkezdene dolgozni a számítógép belsejében A számítógép esetleges károsodásának elkerülése és saját biztonsága érdekében tartsa be az alábbi biztonsági irányelveket. Ha másképp nincs jelezve, a jelen dokumentumban leírt minden művelet a következő feltételek teljesülését feltételezi: • Elvégezte a Munka a számítógép belsejében című fejezetben leírt lépéseket. • Elolvasta a számítógéphez mellékelt biztonsággal kapcsolatos tudnivalókat.
FIGYELMEZTETÉS: A kábelek kihúzásakor ne magát a kábelt, hanem a csatlakozót vagy a húzófület húzza. Néhány kábel csatlakozója reteszelő kialakítással van ellátva; a kábel eltávolításakor kihúzás előtt a retesz kioldófülét meg kell nyomni. Miközben széthúzza a csatlakozókat, tartsa őket egy vonalban, hogy a csatlakozótűk ne görbüljenek meg. A tápkábelek csatlakoztatása előtt ellenőrizze mindkét csatlakozódugó megfelelő helyzetét és beállítását.
11. Távolítsa el az esetleg a foglalatokban lévő ExpressCard vagy Smart Card kártyákat. Ajánlott szerszámok A jelen dokumentumban szereplő eljárások a következő szerszámokat igényelhetik: • • • • • Kis, laposélű csavarhúzó #0 csillagcsavarhúzó #1 csillagcsavarhúzó Kis műanyag pálca BIOS frissítőprogram CD-je A számítógép kikapcsolása FIGYELMEZTETÉS: Az adatvesztés elkerülése érdekében a számítógép kikapcsolása előtt mentsen és zárjon be minden nyitott fájlt, és lépjen ki minden futó programból. 1.
Miután befejezte a munkát a számítógép belsejében Miután befejezte a visszahelyezési eljárásokat, győződjön meg róla, hogy csatlakoztatta-e a külső készülékeket, kártyákat, kábeleket stb., mielőtt a számítógépet bekapcsolná. FIGYELMEZTETÉS: A számítógép sérülésének elkerülése érdekében, csak az ehhez a Dell modellhez tervezett akkumulátort használjon. Ne használjon más Dell számítógéphez gyártott akkumulátort. 1. 2. Csatlakoztassa a külső eszközöket (portreplikátor, lapos akkumulátor, médiabázis stb.
Az akkumulátor eltávolítása 2 1. 2. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Az akkumulátor kioldásához csúsztassa el a kioldóreteszeket. 3. Az akkumulátort csúsztassa ki a számítógépből.
Az akkumulátor behelyezése 1. 2. 12 Csúsztassa az akkumulátort a foglalatába, amíg kattanást nem hall. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A Secure Digital (SD) kártya eltávolítása 3 1. 2. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Nyomja be óvatosan az SD memóriakártyát a számítógépből való kivételhez. 3. Csúsztassa ki a memóriakártyát a számítógépből.
A Secure Digital (SD) kártya beszerelése 1. 2. 14 Nyomja be a memóriakártyát a foglalatba teljesen, amíg kattanást nem hall. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A csuklópánt burkolat eltávolítása 4 1. 2. 3. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a csavarokat, amelyek a csuklópánt burkolatot rögzítik. 4. Fordítsa meg a számítógépet, és távolítsa el a csuklópánt burkolatot.
A csuklópánt burkolat felszerelése 1. 2. 3. 4. 16 Helyezze fel a csuklópánt burkolatot, majd megnyomva rögzítse a számítógépre. Fordítsa meg a számítógépet és helyezze be a csavarokat, amelyek a csuklópánt burkolatot rögzítik. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A billentyűzet eltávolítása 5 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Fejtse ki a négy kapcsot, amely a billentyűzetet a számítógépre rögzíti. 4. Fordítsa fel a billentyűzetet, és helyezze a csuklótámaszra. 5. Csatlakoztassa le a billentyűzet kábelét az alaplapról.
6. Távolítsa el a billentyűzetet a számítógépről. A billentyűzet beszerelése 1. 2. 3. 4. 5. 18 Csatlakoztassa a billentyűzet kábelét az alaplapra. A billentyűzetet 30 fokos szögben megdöntve helyezze a rekeszébe. A billentyűzetet lenyomva rögzítse a helyére. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
Az optikai meghajtó eltávolítása 6 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Távolítsa el a billentyűzetet. 4. Távolítsa el a csavarokat, amelyek az optikai meghajtót rögzítik. 5. Egy csavarhúzó használatával fejtse ki az optikai meghajtót a számítógépből.
Az optikai meghajtó beszerelése 1. 2. 3. 4. 5. 20 Csúsztassa az optikai meghajtót a számítógépház bal oldalán található rekeszbe. Húzza meg az optikai meghajtót a számítógéphez rögzítő csavart. Szerelje be a billentyűzetet. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A memóriamodul eltávolítása 7 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Távolítsa el a billentyűzetet. 4. Húzza szét a rögzítőfüleket a memóriamodulról, amíg az ki nem ugrik a helyéről. 5. Távolítsa el a memóriamodult a számítógépből.
A memóriamodul beszerelése 1. 2. 3. 4. 5. 22 Helyezze be a memóriamodult a memóriafoglalatba. Nyomja le a memóriát addig, amíg a rögzítő kapcsok a helyére nem illesztik a memóriamodult. Szerelje be a billentyűzetet. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A csuklótámasz eltávolítása 8 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Távolítsa el a billentyűzetet. 4. Távolítsa el a csavarokat, amelyek az alsó alapot rögzítik. 5. Fordítsa meg a számítógépet, és csatlakoztassa le a tápegység kártya kábelét (1) és az érintőpanel kábelét (2).
6. Távolítsa el a csavarokat, amelyek a csuklótámaszt a számítógéphez rögzítik. 7. Egy műanyag pálca használatával fejtse ki a csuklótámaszt úgy, hogy kipattintja a csuklótámasz alján, bal és jobb oldalán lévő kapcsokat. Miután kioldotta az összes kapcsot, emelje fel és távolítsa el a csukótámaszt a számítógépből. A csuklótámasz beszerelése 1. Helyezze be a csuklótámaszt a kijelző felé 30 fokos szögben megdöntve. 2.
5. 6. 7. 8. Fordítsa meg a számítógépet és helyezze be a csavarokat, amelyek az alsó alapot rögzítik. Szerelje be a billentyűzetet. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A bekapcsológomb panel eltávolítása 9 1. 2. 3. 4. 5. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a billentyűzetet. Távolítsa el a csuklótámaszt. A bekapcsológomb panel kábelét fejtse le a ragasztóanyagról, amely a csuklótámaszra rögzíti. 6. Fordítsa meg a csuklótámaszt, és távolítsa el a bekapcsológomb panelét a csuklótámaszhoz rögzítő csavart.
7. Emelje fel a bekapcsológomb panelt és a bekapcsológomb panel kábelét húzza ki a nyíláson keresztül. A bekapcsológomb panel beszerelése 1. A bekapcsológomb panel kábelét vezesse át a nyíláson. 2. A bekapcsológomb panelt rögzítse a rekeszébe. 3. Helyezze be a csavart, amely a bekapcsológomb panelt rögzíti. 4. Fordítsa meg a számítógépet, és a bekapcsológomb panel kábelét csatlakoztassa a csuklótámaszra. 5. Szerelje fel a csuklótámaszt. 6. Szerelje be a billentyűzetet. 7.
8. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A merevlemez-meghajtó eltávolítása 10 1. 2. 3. 4. 5. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a billentyűzetet. Távolítsa el a csuklótámaszt. A merevlemez-meghajtót csúsztassa ki és emelje ki a számítógépből. 6. Távolítsa el a csavarokat, amelyek a merevlemez-meghajtó tartókeretet rögzítik, majd a keretet válassza le a merevelemez-meghajtóról.
A merevlemez-meghajtó beszerelése 1. 2. 3. 4. 5. 6. 7. 32 Szerelje a tartókeretet a merevlemez-meghajtóra. Húzza meg a csavarokat, amelyek a merevlemez-meghajtó tartókeretét rögzítik. A merevlemez-meghajtót helyezze a rekeszébe, és csúsztassa a SATA csatlakozóra, ezzel rögzítve az alaplapra. Szerelje fel a csuklótámaszt. Szerelje be a billentyűzetet. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A vezeték nélküli helyi hálózati (WLAN) kártya eltávolítása 11 1. 2. 3. 4. 5. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a billentyűzetet. Távolítsa el a csuklótámaszt. Csatlakoztassa le a WLAN-kártyára csatlakoztatott antennákat. 6. A reteszt kifejtve oldja ki a WLAN-kártyát a rekeszéből.
7. Távolítsa el a WLAN-kártyát a számítógépből. A vezeték nélküli helyi hálózati (WLAN) kártya beszerelése 1. Csúsztassa be a WLAN-kártyát a foglalatába. 2. A WLAN-kártyát pattintsa a reteszbe, hogy az a helyére rögzüljön. 3. Csatlakoztassa az antennákat a WLAN-kártyán lévő színkódok alapján. 4. Szerelje fel a csuklótámaszt. 5. Szerelje be a billentyűzetet. 6. Helyezze be az akkumulátort. 7. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A gombelem eltávolítása 12 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Távolítsa el a billentyűzetet. 4. Távolítsa el a csuklótámaszt. 5. Válassza le a gombelem kábelét az alaplapról. 6. Távolítsa el a gombelemet a számítógépből.
A gombelem beszerelése 1. 2. 3. 4. 5. 6. 36 A gombelemet rögzítse a foglalatába. Csatlakoztassa a gombelem kábelét az alaplapra. Szerelje fel a csuklótámaszt. Szerelje be a billentyűzetet. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
Az USB-kártya eltávolítása 13 1. 2. 3. 4. 5. 6. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a billentyűzetet. Távolítsa el az optikai meghajtót. Távolítsa el a csuklótámaszt. Csatlakoztassa le az USB-kártya kábelét az alaplapról. 7. Távolítsa el az USB-kártyát rögzítő csavart.
8. Emelje meg, és távolítsa el a számítógépből az USB-kártyát. Az USB-kártya beszerelése 1. Az USB-kártyát illessze be a számítógépben található rekeszébe. 2. Helyezze be a csavart, amely az USB-kártyát a helyére rögzíti. 3. Csatlakoztassa az USB-kártya kábelét az alaplapra. 4. Szerelje fel a csuklótámaszt. 5. Szerelje be az optikai meghajtót. 6. Szerelje be a billentyűzetet. 7. Helyezze be az akkumulátort. 8.
A mikrofon eltávolítása 14 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Távolítsa el a billentyűzetet. 4. Távolítsa el a csuklótámaszt. 5. Csatolja le a mikrofon kábelét az alaplapról. 6. A mikrofont emelje meg és távolítsa el a rekeszéből.
A mikrofon beszerelése 1. 2. 3. 4. 5. 6. 40 A mikrofont illessze a rekeszébe. Csatlakoztassa a mikrofon kábelét az alaplapi csatlakozóhoz. Szerelje fel a csuklótámaszt. Szerelje be a billentyűzetet. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A CPU ventilátor szerkezet és a hűtőborda eltávolítása 15 1. 2. 3. 4. 5. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a billentyűzetet. Távolítsa el a csuklótámaszt. Csatlakoztassa le a CPU ventilátor kábelét az alaplapról. 6. Az ábrán látható sorrendben távolítsa el az elveszthetetlen csavarokat, amelyek a hűtőborda és a CPU ventilátor szerkezetet rögzítik.
7. A hűtőborda és a CPU ventilátor szerkezetet távolítsa el a számítógépből. A CPU ventilátor szerkezet és a hűtőborda beszerelése 1. A hűtőbordát és a CPU ventilátor szerkezetet illessze a helyére. 2. Húzza meg az elveszthetetlen csavarokat, amelyek a hűtőbordát és a CPU ventilátor szerkezetet rögzítik. 3. Csatlakoztassa a CPU ventilátor kábelét az alaplapra. 4. Szerelje fel a csuklótámaszt. 5. Szerelje be a billentyűzetet. 6. Helyezze be az akkumulátort.
7. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A processzor eltávolítása 16 1. 2. 3. 4. 5. 6. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a billentyűzetet. Távolítsa el a csuklótámaszt. Távolítsa el a CPU ventilátor szerkezetet és a hűtőbordát. Forgassa el a processzor bütykös csavarját az óramutató járásával ellentétes irányba. 7. Emelje meg, és távolítsa el a számítógépből a processzort.
A processzor beszerelése 1. 2. 3. 4. 5. 6. 7. 46 Helyezze be a processzort a foglalatba. Győződjön meg róla, hogy a processzor megfelelően illeszkedik. Húzza meg a rögzítőgyűrűt az óramutató járásával megegyező irányban, a zárt pozíció eléréséig. Szerelje be a CPU ventilátor szerkezetet és a hűtőbordát. Szerelje fel a csuklótámaszt. Szerelje be a billentyűzetet. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
Az alaplap eltávolítása 17 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Távolítsa el az SD memóriakártyát. 4. Távolítsa el a billentyűzetet. 5. Távolítsa el az optikai meghajtót. 6. Távolítsa el a memóriamodult. 7. Távolítsa el a csuklótámaszt. 8. Távolítsa el a merevlemezt. 9. Távolítsa el a WLAN-kártyát. 10. Távolítsa el a CPU ventilátor szerkezetet és a hűtőbordát. 11.
13. Megdöntve emelje fel az alaplapot, és csúsztassa le a LAN, VGA, HDMI és az USB foglalatokról. Az alaplap beszerelése 1. Az alaplapot a LAN, VGA, HDMI és az USB csatlakozókat a megfelelő foglalataikba illesztve helyezze be és rögzítse a helyére. 2. Helyezze be a csavarokat, amelyek az alaplapot rögzítik a helyére. 3. Csatlakoztassa az LCD kábelt, az egyenáramú bemeneti kábelt, az USB-kártya kábelét, a hangkártya kábelét, a gombelem kábelét és a hangszórókábelt. 4. Szerelje be a processzort. 5.
7. 8. 9. 10. 11. 12. 13. 14. Szerelje be a merevlemezt. Szerelje fel a csuklótámaszt. Szerelje be a memóriamodult. Szerelje be az optikai meghajtót. Szerelje be a billentyűzetet. Helyezze be az SD memóriakártyát. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A hangszórók eltávolítása 18 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Távolítsa el az SD memóriakártyát. 4. Távolítsa el a billentyűzetet. 5. Távolítsa el az optikai meghajtót. 6. Távolítsa el a memóriamodult. 7. Távolítsa el a csuklótámaszt. 8. Távolítsa el a merevlemezt. 9. Távolítsa el a WLAN-kártyát. 10. Távolítsa el a CPU ventilátor szerkezetet és a hűtőbordát. 11. Távolítsa el az alaplapot. 12.
14. Nyomja meg a rögzítő reteszeket és emelje fel a jobb oldali hangszórót. 15. Távolítsa el a hangszóró szerkezetet és a hangszóró kábelét a számítógépből.
A hangszórók beszerelése 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. A bal és a jobb oldali hangszórót helyezze be a megfelelő rekeszeikbe. A hangszóró kábelét illessze a számítógépházba. Szerelje be az alaplapot. Szerelje be a processzort. Szerelje be a CPU ventilátor szerkezetet és a hűtőbordát. Szerelje be a WLAN-kártyát. Szerelje be a merevlemezt. Szerelje fel a csuklótámaszt. Szerelje be a memóriamodult. Szerelje be az optikai meghajtót. Szerelje be a billentyűzetet.
A kijelző szerkezet eltávolítása 19 1. 2. 3. 4. 5. 6. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a csuklópánt burkolatot. Távolítsa el a billentyűzetet. Távolítsa el a csuklótámaszt. Válassza le az LVDS-kábelt az alaplapról. 7. Csatlakoztassa le a WLAN antennát és oldja ki a számítógépházon lévő kábelcsatornából.
8. Távolítsa el a csavarokat, amelyek a bal és a jobb oldali csuklópántot rögzítik. 9. Emelje fel a kijelző szerkezetet és távolítsa el a számítógépből.
A kijelző szerkezet beszerelése 1. 2. 3. 4. A kijelző szerkezet csuklópántjait helyezze a tartójukba. Helyezze be a csavarokat, amelyek a csuklópántokat rögzítik a helyükre. Csatlakoztassa az LVDS-kábelt az alaplapi csatlakozóra. A WLAN antenna kábelét illessze a tartójába, és az antennát csatlakoztassa a WLAN-kártyára. 5. Csatlakoztassa az USB-kártya kábelét. 6. Szerelje fel a csuklótámaszt. 7. Szerelje be a billentyűzetet. 8. Szerelje fel a csuklópánt burkolatot. 9. Helyezze be az akkumulátort. 10.
20 Az egyenáramú bementi port és a tartókeret eltávolítása 1. 2. 3. 4. 5. 6. 7. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a csuklópánt burkolatot. Távolítsa el a billentyűzetet. Távolítsa el a csuklótámaszt. Távolítsa el a kijelző szerkezetet. Válassza le a DC-in kábelt az alaplapról. 8. Távolítsa el a csavart, amely az egyenáramú bemeneti portot és tartókeretet rögzíti.
9. Emelje fel az egyenáramú bemeneti port tartókeretét. 10. Emelje fel az egyenáramú bemeneti portot és távolítsa el a számítógépből.
Az egyenáramú bemeneti port és tartókeret beszerelése 1. 2. 3. 4. 5. 6. 7. 8. 9. Az egyenáramú bemeneti portot és a tartókeretet helyezze a rekeszébe. A rekeszt illessze a helyére, és húzza meg a csavart, amely a tartókeretet és az egyenáramú bemeneti portot a helyére rögzíti. Csatlakoztassa az egyenáramú bemeneti kábelt az alaplapra. Szerelje be a kijelző szerkezetet. Szerelje fel a csuklótámaszt. Szerelje be a billentyűzetet. Szerelje fel a csuklópánt burkolatot. Helyezze be az akkumulátort.
A kijelzőelőlap eltávolítása 21 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Alulról kezdve az előlapot fejtse ki a kijelző szerkezetből úgy, hogy a kijelzőelőlap jobb és bal oldal felé halad. 4. Az előlapot távolítsa el a kijelző szerkezetből, miután minden kapcsot kioldott.
A kijelzőelőlap felszerelése 1. 2. 3. 4. 64 A kijelzőelőlapot illessze a felső burkolatra. Az alsó széltől kezdve nyomja le a kijelzőelőlapot a fülek megfelelő illeszkedéséhez. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A kamera eltávolítása 22 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Távolítsa el a kijelzőelőlapot. 4. Csatlakoztassa le a kamerakábelt a kameramodulról. 5. Fejtse le a kapcsot, emelje fel a kamerát és távolítsa el.
A kamera beszerelése 1. 2. 3. 4. 5. 66 A kameramodult illessze a rekeszébe. Csatlakoztassa a kamera kábelét a kameramodulhoz. Szerelje be a kijelzőelőlapot. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
A kijelzőpanel eltávolítása 23 1. 2. 3. 4. 5. 6. 7. 8. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. Távolítsa el az akkumulátort. Távolítsa el a csuklópánt burkolatot. Távolítsa el a billentyűzetet. Távolítsa el a csuklótámaszt. Távolítsa el a kijelző szerkezetet. Távolítsa el a kijelzőelőlapot. Csatlakoztassa le a kamerakábelt a kameramodulról. 9. Távolítsa el a kijelző tartókeretet és a csuklópántokat rögzítő csavarokat.
10. A vezeték nélküli antennát oldja ki a jobb oldali csuklópántból. 11. Az LVDS-kábelt oldja ki a bal oldali csuklópántból.
12. A kijelzőpanelt és a tartókeretet emelje le a felső burkolatról. 13. Távolítsa el a bal és a jobb oldali tartókeret csavarjait, majd válassza le a kijelzőpanelt. A kijelzőpanel felszerelése 1. A bal és jobb oldali tartókeretet helyezze a kijelzőpanelre, és húzza meg a csavarokat. 2. A kijelzőkábelt és a vezeték nélküli antennát helyezze be és vezesse a bal és jobb oldali csuklópántokon keresztül. 3. A tartókeretekkel ellátott kijelzőpanelt illessze a felső burkolathoz. 4.
6. 7. 8. 9. 10. 11. 12. 13. 70 Csatlakoztassa a kamera kábelét a kameramodulhoz. Szerelje be a kijelzőelőlapot. Szerelje be a kijelző szerkezetet. Szerelje fel a csuklótámaszt. Szerelje be a billentyűzetet. Szerelje fel a csuklópánt burkolatot. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
Az alacsony feszültségű differenciál-jelzés (LVDS) modul kábelének eltávolítása 24 1. Kövesse a Mielőtt elkezdene dolgozni a számítógépen című fejezet utasításait. 2. Távolítsa el az akkumulátort. 3. Távolítsa el a csuklópánt burkolatot. 4. Távolítsa el a billentyűzetet. 5. Távolítsa el az optikai meghajtót. 6. Távolítsa el a csuklótámaszt. 7. Távolítsa el a kijelző szerkezetet. 8. Távolítsa el a kijelzőelőlapot. 9. Távolítsa el a kijelzőpanelt. 10.
12. Fejtse le a teljes kijelzőkábelt a ragasztóanyagról, amely a kijelzőpanelhez rögzíti. Az alacsony feszültségű differenciál-jelzés (LVDS) modul kábelének beszerelése 1. Csatlakoztassa a kijelzőkábelt a kijelzőpanelhez. 2. A kijelzőkábelt csatlakoztassa a kijelzőpanelre, és rögzítse a ragasztószalaggal. 3. Szerelje be a kijelzőpanelt. 4. Szerelje be a kijelzőelőlapot. 5. Szerelje be a kijelző szerkezetet. 6. Szerelje fel a csuklótámaszt. 7. Szerelje be az optikai meghajtót.
8. 9. 10. 11. Szerelje be a billentyűzetet. Szerelje fel a csuklópánt burkolatot. Helyezze be az akkumulátort. Kövesse a Miután befejezte a munkát a számítógép belsejében című fejezet utasításait.
Belépés a Rendszerbeállításba 1. 2. 3. 25 Kapcsolja be (vagy indítsa újra) a számítógépet. A kék DELL embléma megjelenését követően várja meg, amíg megjelenik az F2 billentyű lenyomására utaló készenléti jel. Amint megjelenik az F2 készenléti jel, azonnal nyomja le az billentyűt. MEGJEGYZÉS: Az F2 jelzés azt jelzi, hogy a billentyűzet inicializálva van. A jelzés nagyon gyorsan megjelenhet; figyeljen, hogy időben megnyomhassa az billentyűt.
A Rendszerbeállítás képernyői Menu (Menü) A System Setup (Rendszerbeállítás) ablak tetején jelenik meg. Ez a mező biztosít hozzáférést a Rendszerbeállítási opciókhoz. A navigáláshoz használja a < Balra nyíl > és a < Jobbra nyíl > billentyűket. Amikor a Menu (Menü) opció van kijelölve, az Options List (Opciólista) felsorolja az opciókat, amelyek a számítógépre telepített hardvert ismertetik. Options List (Opciólista) A System Setup (Rendszerbeállítás) ablak tetején jelenik meg.
Billentyű Művelet – vagy + A meglévő tétel értékének módosítása. Almenü kiválasztása vagy parancs végrehajtása. Az alapértelmezett beállítások betöltése. Az aktuális konfiguráció elmentése és kilépés a Rendszerbeállításból. Rendszerbeállítási opciók Main (Alapadatok) System Information (Rendszerinformációk) Megjeleníti a rendszer modellszámát. System Date (Rendszerdátum) A számítógép belső naptárát nullázza. System Time (Rendszeridő) A számítógép belső óráját nullázza.
Rögzített merevlemez A merevlemez-meghajtó modellszámát és kapacitását jeleníti meg. SATA ODD Az optikai meghajtó modellszámát és kapacitását jeleníti meg. AC Adapter Type (A váltóáramú adapter típusa) A váltóáramú adapter típusát jeleníti meg.
váltóáramú adapterre csatlakozik. Miscellaneous Devices (Egyéb eszközök) Ez a mező különféle alaplapi eszközök engedélyezésére, illetve letiltására szolgál. Security (Biztonság) Set Service Tag (Szervizcímke beállítása) Ez a mező jeleníti meg a számítógép szervizcímkéjét. Ha nincs beállítva szervizcímke, ebbe a mezőbe írható be. Set Supervisor Password (Felügyeleti jelszó beállítása) A rendszergazda jelszó módosítása vagy törlése.
Exit (Kilépés) Ebben a részben a beállításokat lehet menteni, elvetni és betölteni, a Rendszerbeállításból való kilépés előtt.
Diagnosztikai hangkódok 26 Ha a monitor nem tudja megjeleníteni a hibaüzeneteket, a számítógép az indítás során a problémát azonosító hangjelzés-sorozatot (hangkódot) bocsát ki. Az egyes hangjelzések közötti szünet 300 ezredmásodperc, a hangjelzés-sorozatok között 3 másodpercnyi szünet van, az egyes hangjelzések időtartama 300 ezredmásodperc. Az egyes hangjelzések és hangjelzés-sorozatok után a BIOS felismeri, ha a felhasználó megnyomja a bekapcsológombot.
Az akkumulátor állapotjelző fényei Ha a számítógép elektromos dugaszolóaljzathoz csatlakozik, az akkumulátor állapotjelző fényei az alábbi módon működnek: • Szakaszosan villogó sárga és fehér fény — A hordozható számítógéphez nem hivatalos vagy a Dell által nem támogatott váltóáramú adapter van csatlakoztatva. • Szakaszosan villogó sárga fény és állandó fehér fény — A váltóáramú adapter csatlakoztatva van, és az akkumulátorral ideiglenes hiba történt.
27 Műszaki adatok MEGJEGYZÉS: A kínált opciók régiónként eltérőek lehetnek. A következő műszaki adatok csupán a törvény értelmében a számítógéphez kötelezően mellékelt adatok. Ha többet szeretne megtudni a számítógép konfigurációjáról, kattintson a Start → Súgó és támogatás menüpontra, és válassza a számítógép adatainak megtekintését.
Hang Típus 2.
Kamera Kamera felbontás 1,3 megapixel Videó felbontás 640 x 480, 30 kép/mp (maximum) Kommunikáció Hálózati adapter 10/100/1000 Ethernet hálózati kártya Vezeték nélküli kapcsolat Beépített vezeték nélküli helyi hálózat (WLAN) Portok és csatlakozók Hang egy darab mikrofon csatlakozó; sztereó fejhallgató/hangszóró csatlakozó Videokártya • egy darab 15-tűs VGA csatlakozó • egy darab 19-tűs HDMI csatlakozó Hálózati adapter egy darab RJ-45 csatlakozó USB három darab 4 érintkezős USB 2.
Kijelző Magasság 193,50 mm Szélesség 344,20 mm Átló 396,24 mm Aktív terület (X/Y) 344,23 mm x 193,54 mm Maximális felbontás 1366 x 768 képpont, 262 ezer színnel Maximális fényesség 220 nit Működési szög 0° (zárt) – 140° Frissítési sebesség 60 Hz Minimális látószögek: Vízszintes 40/40 Függőleges 15/30 (H/L) Képpont méret 0,23 mm x 0,23 mm Billentyűzet Billentyűk száma: Egyesült Államok és Kanada: 86 billentyű, Európa és Brazília: 87 billentyű, Japán: 90 billentyű Érintőpanel Aktív ter
Akkumulátor Súly 0,33 kg Töltési idő körülbelül 4 óra (kikapcsolt számítógép esetén) Feszültség 11,1 V egyenáram Hőmérséklet-tartomány: Üzemi 0 °C és 35 °C között Készenléti –40 °C és 65 °C között Gombelem 3 V-os CR2032 lítium ion gombelem Váltóáramú adapter Típus: Vostro 1440 / Vostro 1450 / Vostro 1540 / Vostro 1550 integrált videokártyával 65 W Vostro 1440 különálló videokártyával 65 W Vostro 1450 különálló videokártyával 90 W Bemeneti feszültség 100 és 240 volt egyenáram között Bemen
Váltóáramú adapter Üzemi 0 °C és 40 °C között Készenléti –40 °C és 70 °C között Fizikai jellemzők Vostro 1440 / Vostro 1450: Magasság (egy WLED panellel) 31,50 mm és 34,70 mm között Szélesség 342,00 mm Mélység 244 mm Súly (minimum) 2,2 kg Vostro 1540 / Vostro 1550: Magasság (egy WLED panellel) 31,50 mm és 34,50 mm között Szélesség 376,00 mm Mélység 260 mm Súly (minimum) 2,37 kg Környezeti Hőmérséklet: Üzemi 0 °C és 35 °C között Tárolási –40 °C és 65 °C között Relatív páratartalom (ma
A Dell elérhetőségei 28 MEGJEGYZÉS: Amennyiben nem rendelkezik aktív internetkapcsolattal, elérhetőségeinket megtalálhatja a vásárlást igazoló nyugtán, a csomagoláson, a számlán vagy a Dell termékkatalógusban. A Dell számos támogatási lehetőséget biztosít, online és telefonon keresztül egyaránt. A rendelkezésre álló szolgáltatások országonként és termékenként változnak, így előfordulhat, hogy bizonyos szolgáltatások nem érhetők el az Ön lakhelye közelében.