Dell Vostro 3360 Brugervejledning Forordningsmodel: P32G Forordningstype: P32G001
Bemærk, Forsigtig, og Advarsel BEMÆRK: BEMÆRK: angiver vigtige oplysninger om, hvordan du bruger computeren optimalt. FORSIGTIG: FORSIGTIG angiver enten en mulig beskadigelse af hardware eller tab af data og oplyser dig om, hvordan du kan undgå dette problem. ADVARSEL: ADVARSEL angiver risiko for tingskade, legemsbeskadigelse eller død. © 2012 Dell Inc.
Indholdsfortegnelse Bemærk, Forsigtig, og Advarsel...................................................................................................2 Kapitel 1: Sådan arbejder du med computeren.........................................................................5 Før du udfører arbejde på computerens indvendige dele........................................................................................5 Sådan slukker du computeren.........................................................................
Sådan fjernes kameramodulet................................................................................................................................27 Sådan installeres kameramodulet..........................................................................................................................28 Sådan fjernes blæseren..........................................................................................................................................28 Sådan installeres blæseren.........
Sådan arbejder du med computeren 1 Før du udfører arbejde på computerens indvendige dele Følg nedenstående sikkerhedsretningslinjer for at beskytte computeren mod potentielle skader og af hensyn til din egen sikkerhed. Hvis intet andet er angivet bygger hver fremgangsmåde i dette dokument på følgende forudsætninger: • Du har udført trinnene i Sådan arbejder du med computeren. • Du har læst sikkerhedsoplysningerne, som fulgte med computeren.
. Luk skærmen og vend computeren om på et fladt arbejdsunderlag. BEMÆRK: For at undgå at beskadige bundkortet skal du fjerne det primære batteri, inden du servicerer computeren. 7. Fjern det primære batteri. 8. Vend computeren om igen. 9. Åbn skærmen. 10. Tryk på tænd/sluk-knappen for at jorde bundkortet. FORSIGTIG: For at sikre dig imod elektriske stød skal du altid tage computeren ud af stikkontakten, før du åbner skærmen.
FORSIGTIG: For at tilslutte et netværkskabel skal du først sætte det i netværksenheden og derefter sætte det i computeren. 3. Genmonter batteriet. 4. Tilslut computeren og alle tilsluttede enheder til deres stikkontakter. 5.
Sådan fjernes og installeres komponenter 2 Dette afsnit har detaljerede oplysninger om, hvordan computerens komponenter fjernes eller installeres. Anbefalede værktøjer Procedurerne i dette dokument kræver eventuelt følgende værktøj: • Lille, almindelig skruetrækker • En stjerneskruetrækker • En lille plastiksyl Sådan fjernes SIM-kortet (Subscriber Identity Module) 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2.
4. Fjern SIM-kortet fra SIM-kortholderen. Sådan installeres SIM-kortet 1. Anbring SIM-kortet i SIM-kortholderen. 2. Skub SIM-kortholderen med SIM-kortet ind i dens åbning. 3. Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes SD-kortet (Security Digital) 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Tryk ind på SD-kortet for at frigøre det fra computeren. Skub SD-kortet ud af computeren.
Sådan installeres adgangspanelet 1. Anbring adgangspanelet til dets oprindelige stilling på computeren. 2. Stram skruen for at fastgøre adgangspanelet til computeren. 3. Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes kort til trådløst lokalnetværk (Wireless Local Area Network – WLAN) 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern adgangspanelet. 3.
Sådan installeres knapcellebatteriet 1. Skub knapcellebatteriet ind i dets åbning på bundkortet. 2. Installer adgangspanelet. 3. Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes hukommelsen 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern adgangspanelet. 3.
3. Lirk, startende fra systemets højre side, med en plastiksyl tastaturet op fra computeren. 4. Vend tastaturet om, og læg det på håndledsstøtten. 5. Løft klemmen for at frigøre tastaturkablet og frakoble det fra computeren.
Sådan installeres tastaturet 1. Tilslut tastaturkablet til bundkortet. 2. Anbring tastaturet i dets oprindelige stilling. 3. Stram skruen for at fastgøre tastaturet til computeren. 4. Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes håndledsstøtten 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) adgangspanel b) tastatur c) dækslet til skærmhængslet 3. Lirk vha.
5. Frakobl kablet til hurtigstartkortet, fingeraftrykslæserens kabel og håndledsstøttens kabel fra bundkortet. 6. Frakobl kablet til strømindikatoren og kablet til LED-kortet fra bundkortet.
7. Fjern skruerne, der fastgør håndledsstøtten til computerens front. 8. Lirk langs håndledsstøttens kanter for at frigøre håndledsstøtten.
9. Løft håndledsstøtten op og væk fra computeren. Sådan installeres håndledsstøtten 1. Tryk, startende fra håndledsstøttens sider, nedad på computeren for at fastgøre tappene på computeren. 2. Stram skruerne, der fastgør håndledsstøtten til computerens front. 3. Tilslut kablet til strømindikatoren og kablet til LED-kortet til bundkortet. 4. Tilslut kablet til hurtigstartkortet, fingeraftrykslæserens kabel og håndledsstøttens kabel til bundkortet. 5.
Sådan fjernes batteriet 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) adgangspanel b) tastatur c) håndledsstøtte 3. Frakobl batteriet fra bundkortet. 4. Fjern skruerne, der fastgør batteriet til bundkortet. 5. Fjern batteriet fra computeren.
Sådan installeres batteriet 1. Anbring batteriet i batterirummet. 2. Genmonter og stram skruerne, der fastgør batteriet til computeren. 3. Tilslut batterikablet til bundkortet. 4. Installer: a) håndledsstøtte b) tastatur c) adgangspanel 5. Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes harddisken 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) adgangspanel b) tastatur c) håndledsstøtte d) batteri 3.
4. Løft harddisken for at frakoble harddiskens kabel. 5. Frakobl harddiskens kabel fra harddisken og fjern harddisken fra computeren. 6. Fjern skruerne, der fastgør harddiskbeslaget til harddisken, og fjern harddiskbeslaget fra den. Sådan installeres harddisken 1. Stram skruerne for at fastgøre harddiskbeslaget til harddisken. 2. Tilslut harddiskens kabel til harddisken og anbring harddisken på dens oprindelige sted på computeren. 3. Stram skruerne for at fastgøre harddisken til computeren. 4.
Sådan fjernes dækslet til skærmhængslet 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern adgangspanelet. 3. Fjern skruerne, der fastgør dækslet til skærmhængslet til computeren. 4. Fjern dækslet til skærmhængslet fra computeren. Sådan installeres dækslet til skærmhængslet 1. Flugt dækslet til skærmhængslet til dets oprindelige stilling på computeren. 2. Stram skruerne, der fastgør dækslet til skærmhængslet til computeren. 3. Installer adgangspanelet. 4.
Sådan fjernes skærmmodulet 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) e) adgangspanel tastatur håndledsstøtte batteri dækslet til skærmhængslet 3. Fjern antennekablerne fra deres føring. 4. Frakobl skærmkablet fra bundkortet og fjern skruerne, der fastgør skærmmodulet til computeren. Sådan installeres skærmmodulet 1. Tilslut skærmkablet til bundkortet og stram skruerne, der fastgør skærmmodulet til computeren. 2.
Sådan fjernes skærmrammen 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) adgangspanel b) tastatur c) håndledsstøtte d) batteri e) skærmmodul 3. Lirk under skærmrammen med en plastiksyl for at frigøre den fra skærmmodulet. 4. Løft skærmrammen og fjern den fra skærmmodulet. Sådan installeres skærmrammen 1. Flugt skærmrammen med skærmmodulet og klik den forsigtigt på plads. 2.
a) b) c) d) e) 3. dækslet til skærmhængslet batteri håndledsstøtte tastatur adgangspanel Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes skærmpanelet 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) e) f) g) adgangspanel tastatur håndledsstøtte batteri dækslet til skærmhængslet skærmmodul Skærmramme 3. Frakobl kamerakablet fra dets stik på kameramodulet. 4.
5. Vip skærmpanelet af skærmmodulet. 6. Anbring skærmpanelet med dets front nedad for at komme til skærm- og kamerakablerne tilsluttet til det.
7. Træk plastiktappen ud for at frakoble skærmkablet fra skærmpanelet. 8. Fjern kamerakablet fra skærmpanelet.
Sådan installeres skærmpanelet 1. Anbring kamerakablet på bagsiden af skærmpanelet. 2. Tilslut skærmkablet til dets stik på skærmpanelet. 3. Anbring skærmpanelet i dets oprindelige stilling på skærmmodulet. 4. Stram skruerne, der fastgør skærmpanelet til skærmmodulet. 5. Tilslut kamerakablet til kameramodulet. 6. Installer: a) b) c) d) e) f) g) 7.
Sådan installeres kameramodulet. 1. Tilslut kamerakablet til kameramodulet og anbring kameramodulet i dets oprindelige stilling på skærmmodulet. 2. Installer: a) Skærmramme b) skærmmodul c) dækslet til skærmhængslet d) batteri e) håndledsstøtte f) tastatur g) adgangspanel 3. Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes blæseren 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2.
Sådan installeres blæseren 1. Tilslut blæserkablet til bundkortet. 2. Stram skruerne for at fastgøre blæseren til computeren. 3. Installer: a) b) c) d) e) f) 4. skærmmodul dækslet til skærmhængslet batteri håndledsstøtte tastatur adgangspanel Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes bundkortet 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2.
5. Fjern harddiskens kabel fra dets føring og vend bundkortet om for at komme til strømstikkets kabel. 6. Frakobl strømstikkets kabel fra bundkortet.
Sådan installeres bundkortet 1. Tilslut strømstikkets kabel til bundkortet. 2. Før harddiskens kabel gennem dets kabeltappe. 3. Stram skruerne for at fastgøre bundkortet til computeren. 4. Tilslut I/O-kortkablet til I/O-kortet. 5. Installer: a) b) c) d) e) f) g) 6. blæser skærmmodul dækslet til skærmhængslet batteri håndledsstøtte tastatur adgangspanel Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes kølelegemet 1.
Sådan installeres kølelegemet 1. Stram skruerne for af fastgøre kølelegemet til bundkortet. 2. Installer: a) b) c) d) e) f) g) h) 3. bundkort blæser skærmmodul dækslet til skærmhængslet batteri håndledsstøtte tastatur adgangspanel Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele. Sådan fjernes højttalerne 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) e) 3.
4. Frigør højtalerkablerne fra deres føring og fjern højtalerne fra computeren. Sådan installeres højtalerne 1. Anbring højttalerne på computeren, og træk højttalerkablerne gennem føringstappene. 2. Tilslut højtalerkablet til I/O-kortet 3. Installer: a) b) c) d) e) 4. harddisk batteri håndledsstøtte tastatur adgangspanel Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele.
Sådan fjernes strømstikket 1. Følg procedurerne i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) e) f) g) h) 3. adgangspanel tastatur håndledsstøtte batteri dækslet til skærmhængslet skærmmodul blæser bundkort Fjern skruen, der fastgør strømstikket til computeren og fjern strømstikket fra computeren. Sådan installeres strømstikket 1. Stram skruen for at fastgøre strømstikket til computeren. 2. Installer: a) b) c) d) e) f) g) h) 3.
4. Fjern skruerne, der fastgør I/O-kortet til computeren og fjern det fra computeren. Sådan installeres I/O-kortet 1. Tilslut højtalerkablet og I/O-kortets kabel til I/O-kortet. 2. Stram skruerne for at fastgøre I/O-kortet til computeren. 3. Installer: a) b) c) d) 4. batteri håndledsstøtte tastatur adgangspanel Følg procedurerne i Efter du har udført arbejde på computerens indvendige dele.
System Setup (Systeminstallation) 3 Med System Setup (Systeminstallation) kan du administrere computerens hardware og angive BIOS-niveauindstillinger.
Tabel 1. Navigationstaster Taster Navigation Op-pil Flytter til forrige felt. Ned-pil Flytter til næste felt. Lader dig vælge en værdi i det valgte felt (hvis det er relevant) eller følge linket i feltet. Mellemrumstast Udfolder eller sammenfolder en rulleliste, hvis relevant. Flytter til næste fokusområde. BEMÆRK: Kun for standard grafisk browser. Flytter til forrige side indtil du får vist hovedskærmen.
Main (Overordnet) L1-cache Viser processorens L1cache-størrelse. L2-cache Viser processorens L2cache-størrelse. L3-cache Viser processorens L3cache-størrelse. Fixed HDD (Fast harddisk) Viser harddiskens modelnummer og kapacitet. SATA ODD Viser det optiske drevs modelnummer og kapacitet. mSata-enhed Viser mini-Sata-enhedens modelnummer og kapacitet. AC Adapter Type (Vekselstrømsadaptertype) Viser vekselstrømsadaptertypen.
Advanced (Avanceret) computeren fra standby. Denne funktion virker kun, når der er tilsluttet en vekselstrømsadapter. SATA Operation (SATA-drift) Skift SATAStandard: AHCI controllertilstanden til enten ATA eller AHCI. Adapter Warnings (Adapteradvarsler) Aktiverer eller deaktiverer adapteradvarsler. Standard: Enabled (Aktiveret) Function Key Behavior (Funktionstasters adfærd) Angiver funktionstasternes adfærd .
Advanced (Avanceret) Internal WLAN (Indbygget WLAN) Aktiverer eller deaktiverer WLAN. Standard: Enabled (Aktiveret) Internal WWAN (Indbygget WWAN) Aktiverer eller deaktiverer WWAN. Standard: Enabled (Aktiveret) Fanen Security (Sikkerhed) viser sikkerhedsstatus og gør det muligt at administrere computerens sikkerhedsfunktioner. Tabel 4. Security Options (Sikkerhedsindstillinger) Security (Sikkerhed) Set Service Tag (Indstil servicekode) Dette felt viser systemets servicekode.
Boot (Start) Hard Disk Drives (Harddiskdrev) Angiver hvilken harddisk computeren kan starte op gennem. USB Storage Device (USB-lagerenhed) Angiver hvilken USB-lagerenhed computeren kan starte op gennem. Cd/dvd/cd-rw-drev Angiver hvilken cd/dvd computeren kan starte op gennem. Netværk Angiver hvilken netværksenhed computeren kan starte op gennem. Afslut – I dette afsnit kan du gemme, slette og indlæse standardindstillinger, inden du afslutter System Setup (Systeminstallation).
Password Type (Adgangskodetype) Beskrivelse Setup password (Installationsadgangskode) Adgangskode, som du skal indtaste for at få adgang til at foretage ændringer i computerens BIOS-indstillingern. FORSIGTIG: Adgangskodefunktionerne giver et grundlæggende sikkerhedsniveau for computerens data. FORSIGTIG: Enhver kan få adgang til de data, der er gemt på computeren, hvis den ikke er låst og uden opsyn. BEMÆRK: Computeren leveres med system- og installationsadgangskoder deaktiveret.
Tryk, for at gå til System Setup (Systeminstallation), på straks efter en start eller genstart. 1. Vælg i skærmen System BIOS (System BIOS) eller System Setup (Systeminstallationen), System Security (Systemsikkerhed) og tryk . Skærmen System Security (Systemsikkerheds) vises. 2. Bekræft i skærmen System Security (Systemsikkerhed), at Password Status (Adgangskodestatus) er Unlocked (Ulåst). 3.
Diagnosticering 4 Hvis du kommer ud for et problem med computeren, skal du køre ePSA-diagnosticering), før du kontakter Dell for at få teknisk assistance. Formålet med at køre diagnosticering er at teste computerens hardware uden behov for ekstra udstyr eller risiko for tab af data. Hvis du ikke er i stand til at løse problemet selv, kan service og support personale bruge de diagnostike resultater til at hjælpe dig med at løse problemet.
Statusindikatorer for enhed Tabel 6. Statusindikatorer for enhed Tændes, når du tænder computeren, og blinker, når computeren er i en strømstyringstilstand. Lyser når computeren læser eller skriver data. Lyser permanent eller blinker for at angive batteriets opladningsstatus. Lyser når trådløst netværk er aktiveret.
Bip 3 Beskrivelse • • • • • 4 Mulig årsag/Fejlfindingstrin Bundkortfejl Chipset Error (North and South Bridge Chipset, DMA/IMR/Timer Error) (Chipsæt-fejl (North og South Bridge-chipsæt, DMA/IMR/ Timerfejl)) Time-Of-Day Clock test failure (Fejl på test af ur) Gate A20 failure (Fejl på Gate A20) Super I/O chip failure (Fejl på super I/O-chip) Keyboard controller test failure (Fejl på test af tastaturcontroller) Fejl ved RAM-læsning/-skrivning Hvis der ikke registreres nogen hukommelse, kan du udføre fø
5 Specifikationer BEMÆRK: Udvalget kan variere afhængigt af region. Du kan finde yderligere oplysninger om computerens konfiguration ved at klikke på Start information om din computer. (Startikon) → Hjælp og support, og vælg derefter mulighed for at se Tabel 8. Systemoplysninger Funktion Beskrivelse Chipsæt Intel HM77 Express-chipsæt DRAM-busbredde 64-bit Flash EPROM: Vostro 3360 / Vostro 3460 SPI 8 MB Vostro 3560 SPI 6 MB Tabel 9.
Funktion Beskrivelse Vostro 3360 Cirrus Logic CS4213D Vostro 3460 / Vostro 3560 Conexant CX20672-21Z Stereokonvertering 24-bit (analog-til-digital og digital-til-analog) Grænseflade: Intern high definition-lyd Ekstern stik til indgående mikrofon/stereohovedtelefoner/eksterne højtalere Højttalere 2W Lydstyrkestyring taster til tastaturfunktioner og programmenuer Tabel 12.
Tabel 14. Kommunikation Funktion Beskrivelse Netværkskort 10/100/1000 Mbps Ethernet LAN Trådløst • • • indbygget WLAN Bluetooth WWAN (valgfri tilbehør) Tabel 15. Porte og stik Funktion Beskrivelse Lyd: Vostro 3360 en stereohovedtelefon/headset/lydudgangsstik Vostro 3460 / 3560 et mikrofonstik, et hovedtelefonstik Video Netværkskort • • et VGA-stik med 15 ben et HDMI-stik med 19 ben et RJ-45 stik USB 3.0: Vostro 3360 tre Vostro 3460 / Vostro 3560 fire BEMÆRK: USB 3.
Funktion Beskrivelse Vostro 3360/3460 1366 x 768 pixel ved 262 K-farver Vostro 3560 1920 x 1080 FHD Maksimal lysstyrke 200 nit Betjeningsvinkel 0° (lukket) til 140° Opdateringshastighed 60 Hz Mindste betragtningsvinkel: Horisontalt 40°/40° Vertikalt 15°/30° (H/L) Pixelafstand 0,23 mm x 0,23 mm Tabel 17.
Funktion Beskrivelse Spænding: Vostro 3360 14,8 VDC Vostro 3460 / Vostro 3560 11,1 VDC Temperaturområde: Drift 0 °C til 35 °C (32 °F til 95 °F) Ikke i drift –40 °C til 65 °C (–40 °F til 149 °F) Knapcellebatteri 3 V CR2032 litium-knapcellebatteri Tabel 20.
Tabel 21. Fysisk Funktion Beskrivelse Vostro 3360 Vostro 3460 Vostro 3560 Højde 19,20 mm (0,75") 30,10 mm (1,18") 32,50 mm (1,27") Bredde 332,00 mm (13,07") 345,50 mm (13,60") 375,00 mm (14,76") Dybde 232,50 mm (9,15") 244,00 mm (9,60") 259,00 mm (10,19") Vægt (med batteri) 1,66 kg (3,65 lb) 2,23 kg (4,91 lb) 2,57 kg (5,66 lb) Tabel 22.
Kontakt Dell 6 BEMÆRK: Hvis du ikke har en aktiv internetforbindelse, kan du finde kontaktoplysninger på købskvitteringen, pakkeslippen, fakturaen eller i Dells produktkatalog. Dell giver flere muligheder for online- og telefonbaseret support og service. Tilgængeligheden varierer for de enkelte lande og produkter, og nogle tjenester findes muligvis ikke i dit område. Sådan kontakter du Dell omkring salg, teknisk support eller kundeservice: 1. Besøg support.dell.com. 2. Vælg supportkategori. 3.