Dell Vostro 3550 Korisnički priručnik Model sa regulacijom P16F Tip sa regulacijom P16F001
Napomene, oprez i upozorenja NAPOMENA: NAPOMENA ukazuje na važne informacije koje će vam pomoći da iskoristite računar na bolji način. OPREZ: OPREZ ukazuje na potencijalno oštećenje hardvera ili gubitak podataka u slučaju nepoštovanja uputstava. UPOZORENJE: UPOZORENJE ukazuje na potencijalno oštećenje imovine, telesne povrede i smrtni ishod. Informacije u ovoj brošuri podložne su promenama bez prethodne najave. © 2011. Dell Inc. Sva prava zadržana.
Sadržaj Napomene, oprez i upozorenja...................................................................2 Poglavlje 1: Rad na računaru......................................................................7 Pre rada u unutrašnjosti računara....................................................................................7 Preporučeni alati...............................................................................................................9 Isključivanje računara...................................
Instaliranje optičkog diska..............................................................................................22 Poglavlje 8: Čvrsti disk..............................................................................23 Uklanjanje čvrstog diska.................................................................................................23 Instaliranje čvrstog diska................................................................................................24 Poglavlje 9: ExpressCard......
Poglavlje 16: Prekidač za blokadu...........................................................51 Uklanjanje prekidača za blokadu.....................................................................................51 Instaliranje prekidača za blokadu...................................................................................51 Poglavlje 17: Zvučnik..................................................................................53 Uklanjanje zvučnika...................................................
Instaliranje okna ekrana..................................................................................................76 Poglavlje 25: Kamera.................................................................................77 Uklanjanje kamere...........................................................................................................77 Instaliranje kamere.........................................................................................................
Rad na računaru 1 Pre rada u unutrašnjosti računara Koristite sledeće mere predostrožnosti kako biste svoj računar zaštitili od mogućih oštećenja i kako osigurali svoju ličnu bezbednost. Osim ako nije drugačije navedeno, svaka procedura u ovom dokumentu pretpostavlja da su ispunjeni sledeći uslovi: • Izvršili ste korake navedene u odeljku Rad na računaru. • Pročitali ste bezbednosne informacije koje ste dobili uz računar.
OPREZ: Kada odspajate kabl, povucite njegov konektor ili jezičak za povlačenje, a ne sam kabl. Neki kablovi imaju konektore sa držačima za zaključavanje; ako isključujete ovu vrstu kabla, pritisnite držače za zaključavanje pre nego što odspojite kabl. Kada razdvajate konektore držite ih poravnate i izbegavajte krivljenje bilo kojeg pina konektora. Takođe, pre nego što priključite kabl, pobrinite se da su oba konektora pravilno okrenuta i poravnata.
Preporučeni alati Za procedure u ovom dokumentu mogu se zahtevati sledeći alati: • Mali odvrtač sa ravni vrhom • #0 Phillips odvrtač • #1 Phillips odvrtač • Malo plastično šilo • CD sa programom za ažuriranje flešovanja BIOS-a Isključivanje računara OPREZ: Da bi se izbegao gubitak podataka, sačuvajte i zatvorite sve otvorene datoteke i zatvorite sve otvorene programe pre nego što isključite računar. 1.
1. Povežite eksterne uređaje, kao što je replikator portova, rezervna baterija ili medijska baza, i zamenite kartice, kao što je ExpressCard. 2. Povežite telefonske ili mrežne kablove sa računarom. OPREZ: Da biste povezali mrežni kabl, prvo priključite kabl u mrežni uređaj a zatim ga priključite u računar. 3. Zamenite bateriju. 4. Priključite računar i sve povezane uređaje u odgovarajuće električne utičnice. 5. Uključite računar.
Baterija 2 Uklanjanje baterije 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Gurnite reze za otpuštanje da biste otključali bateriju. 3. Gurnite bateriju i uklonite je iz računara.
Instaliranje baterije 1. Gurajte bateriju u pripadajući slot dok ne „klikne“ u ležište. 2. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Memorijska kartica 3 Uklanjanje memorijske kartice 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Pritisnite memorijsku karticu da biste je oslobodili iz računara. 3. Izvadite memorijsku karticu iz računara.
Instaliranje memorijske kartice 1. Gurnite memorijsku karticu u pripadajući slot tako da "klikne". 2. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Kartica za modul pretplatničkog identiteta (SIM) 4 Uklanjanje modula pretplatničkog identiteta (SIM) 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Pritisnite SIM karticu da biste je oslobodili iz računara. 4. Uhvatite SIM karticu i povucite je da biste je oslobodili iz računara.
Instaliranje modula pretplatničkog identiteta (SIM) 1. Gurnite SIM karticu u slot tako da "klikne". 2. Instalirajte bateriju. 3. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Pristupna ploča 5 Uklanjanje pristupne ploče 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite zavrtnje koji učvršćuju pristupnu ploču za osnovu računara. 4. Podignite pristupnu ploču pod uglom i uklonite je iz računara.
Instaliranje pristupne ploče 1. Instalirajte pristupnu ploču na zadnji deo računara. 2. Pritegnite zavrtnje da biste učvrstili pristupnu ploču za osnovu sistema. 3. Instalirajte bateriju. 4. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Memorija 6 Uklanjanje memorijskog modula 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Odignite pričvrsne spone od memorijskog modula tako da iskoči. 5. Uklonite memorijski modul iz pripadajućeg konektora na matičnoj ploči.
Instaliranje memorijskog modula 1. Umetnite memorijski modul u utičnicu za memoriju. 2. Pritisnite spone da biste učvrstili memorijski modul za matičnu ploču. 3. Instalirajte pristupnu ploču. 4. Instalirajte bateriju. 5. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Optički disk 7 Uklanjanje optičkog diska 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite zavrtanj koji učvršćuje optički disk. 5. Pomoću odvrtača izvadite optički disk iz računara.
Instaliranje optičkog diska 1. Gurnite optički disk u odeljak na kućištu. 2. Pritegnite zavrtanj da biste učvrstili optički disk za računar. 3. Instalirajte pristupnu ploču. 4. Instalirajte bateriju. 5. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Čvrsti disk 8 Uklanjanje čvrstog diska 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite zavrtnje koji učvršćuju čvrsti disk za sistem. 5. Podignite čvrsti disk sa sistema pod uglom i uklonite ga.
6. Uklonite zavrtnje koji učvršćuju konzolu čvrstog diska za čvrsti disk. Instaliranje čvrstog diska 1. Zamenite zavrtnje da biste učvrstili konzolu čvrstog diska za čvrsti disk. 2. Postavite čvrsti disk na kućište. 3. Zamenite zavrtnje da biste učvrstili čvrsti disk za sistem. 4. Instalirajte pristupnu ploču. 5. Instalirajte bateriju. 6. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
ExpressCard 9 Uklanjanje ExpressCard kartice 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Pritisnite ExpressCard karticu i otpustite. 4. Izvadite ExpressCard karticu izvan računara i uklonite je.
Instaliranje ExpressCard kartice 1. Gurnite ExpressCard karticu u slot tako da "klikne". 2. Instalirajte bateriju. 3. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
ExpressCard ploča 10 Uklanjanje ExpressCard ploče 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite ExpressCard karticu. 4. Uklonite pristupnu ploču. 5. Uklonite tastaturu. 6. Uklonite oslonac za dlan. 7. Podignite pričvrsnu sponu kabla ExpressCard ploče da biste je otvorili. 8. Odspojite kabl ExpressCard ploče.
9. Uklonite zavrtanj koji učvršćuje ExpressCard ploču. 10. Odignite rezu koja učvršćuje ExpressCard ploču.
11. Podignite ExpressCard ploču pod uglom i uklonite je. Instaliranje ExpressCard ploče 1. Instalirajte ExpressCard ploču u slot. 2. Pričvrstite rezu na ExpressCard ploču. 3. Pričvrstite ExpressCard ploču za matičnu ploču. 4. Povežite kabl ExpressCard ploče na matičnu ploču. 5. Pritisnite pričvrsnu sponu da biste učvrstili ExpressCard ploču. 6. Instalirajte oslonac za dlan. 7. Instalirajte tastaturu. 8. Instalirajte pristupnu ploču. 9. Instalirajte ExpressCard karticu. 10.
Kartica za bežičnu mrežu šireg geografskog područja (WWAN) 11 Uklanjanje kartice za bežičnu mrežu šireg geografskog područja (WWAN) 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Odspojite antenske kablove sa WWAN kartice. 5. Uklonite zavrtanj koji učvršćuje WWAN karticu.
6. Uklonite WWAN karticu iz računara. Instaliranje kartice za bežičnu mrežu šireg geografskog područja (WWAN) 1. Gurnite WWAN karticu u odgovarajući slot. 2. Pritegnite zavrtanj da biste učvrstili WWAN karticu u ležište. 3. Povežite antene prema kodu boja na WWAN kartici. 4. Instalirajte pristupnu ploču. 5. Instalirajte bateriju. 6. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Tastatura 12 Uklanjanje tastature 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Oslobodite reze koje učvršćuju tastaturu za računar. 4. Gurnite tastaturu nagore i okrenite je naopako.
5. Oslobodite pričvrsnu sponu kabla tastature. 6. Odspojite kabl tastature.
7. Ako vaš računar ima tastaturu sa pozadinskim osvetljenjem, otvorite pričvrsnu sponu kabla tastature sa pozadinskim osvetljenjem. 8. Ako vaš računar ima tastaturu sa pozadinskim osvetljenjem, odspojite kabl tastature sa pozadinskim osvetljenjem. Instaliranje tastature 1. Povežite kabl za prenos podataka tastature na zadnji deo tastature. 2. Povežite kabl za prenos podataka tastature na matičnu ploču. 3.
Kartica za bežičnu lokalnu mrežu (WLAN) 13 Uklanjanje kartice za bežičnu lokalnu mrežu (WLAN) 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite tastaturu. 5. Uklonite oslonac za dlan. 6. Odspojite antenske kablove koji mogu biti povezani sa WLAN karticom. 7. Uklonite zavrtanj koji učvršćuje WLAN karticu.
8. Uklonite WLAN karticu iz računara. Instaliranje kartice za bežičnu lokalnu mrežu (WLAN) 1. Gurnite WLAN karticu u odgovarajući slot. 2. Pritegnite zavrtnje da biste učvrstili WLAN karticu u ležište. 3. Povežite antene prema kodu boja na WLAN kartici. 4. Instalirajte oslonac za dlan. 5. Instalirajte tastaturu. 6. Instalirajte pristupnu ploču. 7. Instalirajte bateriju. 8. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Oslonac za dlan 14 Uklanjanje oslonca za dlan 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite tastaturu. 5. Uklonite gumene umetke sa donje strane računara. 6. Uklonite zavrtnje koji učvršćuju oslonac za dlan za računar.
7. Otpustite pričvrsnu sponu kabla ploče dugmeta za uključivanje/isključivanje. 8. Odspojite kabl ploče dugmeta za uključivanje/isključivanje.
9. Otpustite pričvrsnu sponu kabla za prenos podataka tačpeda. 10. Odspojite kabl za prenos podataka tačpeda. 11. Otpustite pričvrsnu sponu kabla ploče dugmeta za brzo pokretanje.
12. Odspojite kabl ploče dugmeta za brzo pokretanje. 13. Otpustite pričvrsnu sponu kabla za prenos podataka čitača otiska prsta.
14. Odspojite kabl za prenos podataka čitača otiska prsta. 15. Uklonite zavrtnje koji učvršćuju oslonac za dlan za sistem. 16. Odignite duž ivica oslonca za dlan.
17. Podignite i uklonite oslonac za dlan sa računara. Instaliranje oslonca za dlan 1. Instalirajte oslonac za dlan na računar. 2. Pritisnite ivice da biste učvrstili oslonac za dlan. 3. Pritegnite neispadajuće zavrtnje da biste učvrstili oslonac za dlan. 4. Povežite kablove tačpeda, čitača otiska prsta i ploče dugmeta za brzo pokretanje na oslonac za dlan. 5. Pritegnite zavrtnje na donjem delu sistema koji učvršćuju oslonac za dlan. 6. Instalirajte gumene umetke na donji deo računara. 7.
10. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Čitač otiska prsta 15 Uklanjanje čitača otiska prsta 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite tastaturu. 5. Uklonite oslonac za dlan. 6. Odlepite kabl čitača otiska prsta sa lepljive trake koja je pričvršćena za oslonac za dlan. 7. Uklonite zavrtanj koji učvršćuje konzolu čitača otiska prsta.
8. Podignite konzolu čitača otiska prsta pod uglom i izvadite je. 9. Odlepite kabl čitača otiska prsta sa lepljive trake koja je pričvršćena za oslonac za dlan.
10. Podignite i uklonite ploču čitača otiska prsta. Instaliranje čitača otiska prsta 1. Pričvrstite trakom kabl čitača otiska prsta za oslonac za dlan. 2. Pritegnite zavrtanj koji učvršćuje konzolu čitača otiska prsta. 3. Instalirajte oslonac za dlan. 4. Instalirajte tastaturu. 5. Instalirajte pristupnu ploču. 6. Instalirajte bateriju. 7. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Prekidač za blokadu 16 Uklanjanje prekidača za blokadu 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite tastaturu. 5. Uklonite oslonac za dlan. 6. Podignite i uklonite prekidač za blokadu. Instaliranje prekidača za blokadu 1. Instalirajte prekidač za blokadu. 2. Instalirajte oslonac za dlan. 3. Instalirajte tastaturu. 4. Instalirajte pristupnu ploču. 5. Instalirajte bateriju. 6.
Zvučnik 17 Uklanjanje zvučnika 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite memorijsku karticu. 4. Uklonite ExpressCard karticu. 5. Uklonite pristupnu ploču. 6. Uklonite memorijski modul. 7. Uklonite optički disk. 8. Uklonite čvrsti disk. 9. Uklonite WWAN karticu. 10. Uklonite tastaturu. 11. Uklonite oslonac za dlan. 12. Uklonite WLAN karticu. 13. Uklonite zaštitni prekidač. 14. Uklonite ExpressCard ploču. 15. Uklonite sklop ekrana.
18. Podignite desni zvučnik. 19. Oslobodite kablove zvučnika iz kanala za usmeravanje.
20. Podignite levi zvučnik i uklonite ga. Instaliranje zvučnika 1. Instalirajte levi zvučnik. 2. Učvrstite kablove zvučnika kroz kanale za usmeravanje. 3. Instalirajte desni zvučnik. 4. Zamenite zavrtnje da biste učvrstili desni i levi zvučnik. 5. Instalirajte matičnu ploču. 6. Instalirajte sklop ekrana. 7. Instalirajte ExpressCard ploču. 8. Instalirajte zaštitni prekidač. 9. Instalirajte WLAN karticu. 10. Instalirajte oslonac za dlan. 11. Instalirajte tastaturu. 12.
Ploča dugmeta za uključivanje/ isključivanje 18 Uklanjanje ploče dugmeta za uključivanje/ isključivanje 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite tastaturu. 5. Uklonite oslonac za dlan. 6. Odvojite kabl ploče dugmeta za uključivanje/isključivanje od lepljive trake koja ga učvršćuje za oslonac za dlan. 7. Uklonite zavrtanj koji učvršćuje ploču dugmeta za uključivanje/isključivanje.
8. Odignite rezu da biste oslobodili ploču dugmeta za uključivanje/isključivanje, a zatim je podignite i uklonite. Instaliranje ploče dugmeta za uključivanje/ isključivanje 1. Instalirajte ploču dugmeta za uključivanje/isključivanje. 2. Pričvrstite rezu ploče dugmeta za uključivanje/isključivanje. 3. Zamenite zavrtanj da biste učvrstili ploču dugmeta za uključivanje/isključivanje. 4. Instalirajte oslonac za dlan. 5. Instalirajte tastaturu. 6. Instalirajte pristupnu ploču. 7.
19 Ploča dugmeta za brzo pokretanje Uklanjanje ploče dugmeta za brzo pokretanje 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite tastaturu. 5. Uklonite oslonac za dlan. 6. Oslobodite kabl ploče dugmeta za brzo pokretanje iz lepljive trake zalepljene na oslonac za dlan. 7. Uklonite zavrtanj koji učvršćuje ploču dugmeta za brzo pokretanje.
8. Podignite i uklonite ploču dugmeta za brzo pokretanje. Instaliranje ploče dugmeta za brzo pokretanje 1. Instalirajte ploču dugmeta za brzo pokretanje. 2. Zamenite zavrtanj koji učvršćuje ploču dugmeta za brzo pokretanje. 3. Instalirajte oslonac za dlan. 4. Instalirajte tastaturu. 5. Instalirajte pristupnu ploču. 6. Instalirajte bateriju. 7. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Coin-Cell baterija 20 Uklanjanje Coin-Cell baterije 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite tastaturu. 5. Uklonite oslonac za dlan. 6. Pritisnite coin-cell bateriju da biste je oslobodili sa matične ploče. Instaliranje Coin-Cell baterije 1. Umetnite coin-cell bateriju u slot. 2. Pritisnite coin-cell bateriju dok se ne smesti u ležište. 3. Instalirajte oslonac za dlan. 4. Instalirajte tastaturu. 5.
7. 62 Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Rashladni element 21 Uklanjanje rashladnog elementa 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite memorijsku karticu. 4. Uklonite ExpressCard karticu. 5. Uklonite pristupnu ploču. 6. Uklonite memorijski modul. 7. Uklonite optički disk. 8. Uklonite čvrsti disk. 9. Uklonite WWAN karticu. 10. Uklonite tastaturu. 11. Uklonite oslonac za dlan. 12. Uklonite WLAN karticu. 13. Uklonite zaštitni prekidač. 14. Uklonite ExpressCard ploču. 15.
18. Podignite rashladni element i uklonite ga sa matične ploče.
Instaliranje rashladnog elementa 1. Postavite rashladni element u slot na matičnoj ploči. 2. Pritegnite zavrtnje da biste učvrstili rashladni element na matičnu ploču. 3. Instalirajte matičnu ploču. 4. Instalirajte sklop ekrana. 5. Instalirajte ExpressCard ploču. 6. Instalirajte zaštitni prekidač. 7. Instalirajte WLAN karticu. 8. Instalirajte oslonac za dlan. 9. Instalirajte tastaturu. 10. Instalirajte WWAN karticu. 11. Instalirajte čvrsti disk. 12. Instalirajte optički disk. 13.
Procesor 22 Uklanjanje procesora 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite memorijsku karticu. 4. Uklonite ExpressCard karticu. 5. Uklonite pristupnu ploču. 6. Uklonite memorijski modul. 7. Uklonite optički disk. 8. Uklonite čvrsti disk. 9. Uklonite WWAN karticu. 10. Uklonite tastaturu. 11. Uklonite oslonac za dlan. 12. Uklonite WLAN karticu. 13. Uklonite zaštitni prekidač. 14. Uklonite ExpressCard ploču. 15.
18. Podignite procesor i uklonite ga.
Instaliranje procesora 1. Stavite procesor u utičnicu za procesor. Uverite se da je procesor pravilno namešten. 2. Pritegnite zavrtanj procesora u smeru kretanja kazaljki sata. 3. Instalirajte matičnu ploču. 4. Instalirajte sklop ekrana. 5. Instalirajte ExpressCard ploču. 6. Instalirajte zaštitni prekidač. 7. Instalirajte WLAN karticu. 8. Instalirajte oslonac za dlan. 9. Instalirajte tastaturu. 10. Instalirajte WWAN karticu. 11. Instalirajte čvrsti disk. 12. Instalirajte optički disk. 13.
Sklop ekrana 23 Uklanjanje sklopa ekrana 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite WWAN karticu. 5. Uklonite tastaturu. 6. Uklonite oslonac za dlan. 7. Uklonite WLAN karticu. 8. Odvojite srednji poklopac. 9. Izvadite kablove WWAN antene iz otvora za usmeravanje.
10. Odspojite kabl za prenos podataka ekrana sa matične ploče. 11. Ako vaš računar ima dodirni ekran, odspojite kabl dodirnog ekrana.
12. Uklonite zavrtnje koji učvršćuju sklop ekrana za sistem. 13. Podignite i uklonite sklop ekrana sa sistema. Instaliranje sklopa ekrana 1. Pričvrstite sklop ekrana za osnovu računara. 2. Pritegnite zavrtnje da biste učvrstili sklop ekrana. 3. Povežite kabl dodirnog ekrana (ako postoji) na matičnu ploču. 4. Povežite kabl za prenos podataka ekrana na matičnu ploču. 5. Učvrstite antenske kablove kroz kanale za usmeravanje. 6. Povežite antenske kablove sa instaliranim bežičnim uređajem. 7.
10. Instalirajte tastaturu. 11. Instalirajte WWAN karticu. 12. Instalirajte pristupnu ploču. 13. Instalirajte bateriju. 14. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Okno ekrana 24 Uklanjanje okna ekrana 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite WWAN karticu. 5. Uklonite tastaturu. 6. Uklonite oslonac za dlan. 7. Uklonite WLAN karticu. 8. Uklonite sklop ekrana. 9. Odvojite okno od sklopa ekrana. 10. Podignite i uklonite okno ekrana.
Instaliranje okna ekrana 1. Postavite okno ekrana na računar. 2. Počev od donje ivice, pritisnite okno ekrana na dole da biste aktivirali držače. 3. Instalirajte sklop ekrana. 4. Instalirajte WLAN karticu. 5. Instalirajte oslonac za dlan. 6. Instalirajte tastaturu. 7. Instalirajte WWAN karticu. 8. Instalirajte pristupnu ploču. 9. Instalirajte bateriju. 10. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Kamera 25 Uklanjanje kamere 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite pristupnu ploču. 4. Uklonite WWAN karticu. 5. Uklonite tastaturu. 6. Uklonite oslonac za dlan. 7. Uklonite WLAN karticu. 8. Uklonite sklop ekrana. 9. Uklonite okno ekrana. 10. Odspojite kabl kamere. 11. Odlepite traku koja učvršćuje kameru.
12. Odvojite rezu, a zatim podignite ekran i uklonite ga. Instaliranje kamere 1. Postavite kameru u slot ploče ekrana. 2. Zalepite trakom da biste učvrstili kameru. 3. Instalirajte okno ekrana. 4. Instalirajte sklop ekrana. 5. Instalirajte WLAN karticu. 6. Instalirajte oslonac za dlan. 7. Instalirajte tastaturu. 8. Instalirajte WWAN karticu. 9. Instalirajte pristupnu ploču. 10. Instalirajte bateriju.
11. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Konzole i zglobovi ekrana 26 Uklanjanje konzola, zglobova i ploče ekrana 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite memorijsku karticu. 4. Uklonite pristupnu ploču. 5. Uklonite WLAN karticu. 6. Uklonite čvrsti disk. 7. Uklonite tastaturu. 8. Uklonite WWAN karticu. 9. Uklonite oslonac za dlan. 10. Uklonite sklop ekrana. 11. Uklonite okno ekrana. 12. Uklonite kameru ekrana. 13. Oslobodite antenske kablove iz desnog zgloba. 14.
15. Podignite i uklonite ploču ekrana zajedno sa konzolama i zglobovima. 16. Oslobodite kablove iz levog zgloba.
17. Odlepite traku koja pričvršćuje kabl ekrana za ploču ekrana. 18. Odspojite kabl ekrana sa ploče ekrana. 19. Odlepite i uklonite kabl ekrana.
20. Uklonite zavrtnje koji učvršćuju konzole i zglobove ekrana za ploču ekrana. Instaliranje konzola, zglobova i ploče ekrana 1. Pritegnite zavrtnje da biste učvrstili konzole i zglobove ekrana za ploču ekrana. 2. Zalepite trakom kabl ekrana na zadnji deo ploče ekrana. 3. Učvrstite kablove kroz levi zglob. 4. Pritegnite zavrtnje da biste učvrstili konzole i zglobove ekrana za sklop ekrana. 5. Učvrstite antenski kabl za desni zglob. 6. Instalirajte kameru ekrana. 7. Instalirajte okno ekrana.
11. Instalirajte tastaturu. 12. Instalirajte čvrsti disk. 13. Instalirajte WLAN karticu. 14. Instalirajte pristupnu ploču. 15. Instalirajte memorijsku karticu. 16. Instalirajte bateriju. 17. Sledite procedure u odeljku Posle rada u unutrašnjosti računara.
Matična ploča 27 Uklanjanje matične ploče 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite memorijsku karticu. 4. Uklonite ExpressCard karticu. 5. Uklonite pristupnu ploču. 6. Uklonite memorijski modul. 7. Uklonite optički disk. 8. Uklonite čvrsti disk. 9. Uklonite WWAN karticu. 10. Uklonite tastaturu. 11. Uklonite oslonac za dlan. 12. Uklonite WLAN karticu. 13. Uklonite zaštitni prekidač. 14. Uklonite ExpressCard ploču. 15.
17. Uklonite zavrtnje koji učvršćuju matičnu ploču za kućište. 18. Podignite matičnu ploču pod uglom i uklonite je.
Instaliranje matične ploče 1. Poravnajte matičnu ploču sa konektorima portova na zadnjem delu kućišta i postavite matičnu ploču na računar. 2. Pritegnite zavrtnje koji učvršćuju matičnu ploču. 3. Instalirajte kabl zvučnika. 4. Instalirajte sklop ekrana. 5. Instalirajte ExpressCard ploču. 6. Instalirajte zaštitni prekidač. 7. Instalirajte WLAN karticu. 8. Instalirajte oslonac za dlan. 9. Instalirajte tastaturu. 10. Instalirajte WWAN karticu. 11. Instalirajte čvrsti disk. 12.
Leva ulazno/izlazna ploča 28 Uklanjanje leve i desne ulazno/izlazne (U/I) ploče 1. Sledite procedure u odeljku Pre rada u unutrašnjosti računara. 2. Uklonite bateriju. 3. Uklonite memorijsku karticu. 4. Uklonite ExpressCard karticu. 5. Uklonite pristupnu ploču. 6. Uklonite memorijski modul. 7. Uklonite optički disk. 8. Uklonite čvrsti disk. 9. Uklonite WWAN karticu. 10. Uklonite tastaturu. 11. Uklonite oslonac za dlan. 12. Uklonite WLAN karticu. 13. Uklonite zaštitni prekidač. 14.
18. Uklonite zavrtanj koji učvršćuje desnu U/I ploču. 19. Podignite U/I ploču i uklonite je.
Instaliranje leve i desne ulazno/izlazne (U/I) ploče 1. Instalirajte levu i desnu U/I ploču. 2. Instalirajte matičnu ploču. 3. Instalirajte sklop ekrana. 4. Instalirajte ExpressCard ploču. 5. Instalirajte zaštitni prekidač. 6. Instalirajte WLAN karticu. 7. Instalirajte oslonac za dlan. 8. Instalirajte tastaturu. 9. Instalirajte WWAN karticu. 10. Instalirajte čvrsti disk. 11. Instalirajte optički disk. 12. Instalirajte memorijski modul. 13. Instalirajte pristupnu ploču. 14.
Podešavanje sistema 29 Pregled Podešavanja sistema Program za podešavanje sistema (System Setup) omogućava da: • promenite informacije o konfiguraciji sistema nakon dodavanja, promene ili uklanjanja hardvera na vašem računaru • podesite ili promenite korisničke opcije kao što je lozinka korisnika. • pročitate trenutnu veličinu memorije ili podesite tip instaliranog čvrstog diska.
Ekrani programa za podešavanje sistema (System Setup) Menu (Meni) — Pojavljuje se pri vrhu prozora programa za podešavanje sistema (System Setup). Ovo polje obezbeđuje meni za pristup opcijama programa za podešavanje sistema. Pritiskajte tastere < Strelica levo > i < Strelica desno > za navigaciju. Kada je opcija Menu (Meni) istaknuta, Options List (Lista opcija) navodi opcije koje određuju hardver instaliran na računaru.
Pritisak na taster < Esc > Akcija Izlazak iz trenutnog prozora ili prebacivanje trenutnog prikaza u Exit stranicu u programu za podešavanje sistema. < Strelica gore > ili < Strelica dole > Izbor stavke za prikaz. < Strelica levo > ili < Strelica desno > Izbor menija za prikaz. – ili + Promena vrednosti postojeće stavke. < Enter > Izbor podmenija ili izvršenje naredbe. < F9 > Učitavanje podrazumevanog podešavanja.
L1 Cache Size (Veličina L1 keša) Prikazuje veličinu L1 keš memorije procesora. L2 Cache Size (Veličina L2 keša) Prikazuje veličinu L2 keš memorije procesora. L3 Cache Size (Veličina L3 keša) Prikazuje veličinu L3 keš memorije procesora. Informacije o memoriji Extended Memory (Proširena memorija) Prikazuje memoriju instaliranu na računaru. System Memory (Memorija sistema) Prikazuje memoriju ugrađenu u računar. Memory Speed (Brzina memorije) Prikazuje brzinu memorije.
koristeći skladištenu energiju baterije sistema putem USB PowerShare porta, čak i kada je računar isključen. USB Wake Support (Podrška za buđenje preko USB-a) Omogućava da USB uređaji Podrazumevano: pokreću računar iz stanja Onemogućeno pripravnosti. Ova funkcija je omogućena samo kada je AC adapter priključen. SATA Operation (SATA režim rada) Promena režima rada SATA Podrazumevano: AHCI kontrolera u ATA ili AHCI. Adapter Warnings (Upozorenja za adapter) Omogućava ili onemogućava upozorenja za adapter.
restartovanja/obnavljanja sistema iz stanja hibernacije. Computrace Omogućava ili onemogućava funkciju Computrace na računaru. Pokretanje sistema Boot Priority Order (Redosled prioriteta pokretanja) Određuje redosled različitih uređaja preko kojih se pokreće sistem računara prilikom pokretanja. Hard Disk Drives (Jedinice čvrstog diska) Određuje koji čvrsti disk služi za pokretanje sistema računara.
Dijagnostika 30 Svetla za status uređaja Uključuju se kada uključite računar i trepere kada se računar nalazi u režimu za upravljanje potrošnjom. Uključuju se kada računar čita ili upisuje podatke. Neprekidno svetle ili trepere kako bi pokazale status punjenja baterije. Uključuju se kada je omogućena bežična mreža.
Ton Mogući uzrok Koraci u otklanjanju problema 1 BIOS ROM kontrolna suma ili otkaz.
31 Specifikacije NAPOMENA: Ponuda se može razlikovati po regionima. Sledeće specifikacije su samo one koje se po zakonu moraju isporučivati sa računarom. Za dodatne informacije u vezi sa konfiguracijom računara, kliknite na Start → Pomoć i podrška i izaberite opciju za prikaz informacija o računaru.
Video Tip videa • • integrisan na matičnoj ploči diskretna video kartica Video kontroler i memorija UMA: Vostro 3350/ 3450/ 3550/ 3750 Intel Graphics Media Accelerator HD Vostro 3555 AMD Radeon HD series — do 256 MB / 512 MB deljene memorije Diskretni: Vostro 3350 AMD Radeon HD6490 GDDR5 - 512 MB Vostro 3450/ 3550 AMD Radeon HD6630 - 1 GB VRAM Vostro 3750 NVIDIA GeForce GT 525M - 1 GB Komunikacije Mrežni adapter 10/100/1000 Mbps Ethernet LAN Bežične interna bežična lokalna mreža (WLAN) i bež
Portovi i konektori Vostro 3555 tri USB 3.0 konektora i jedan eSATA/USB 2.0 konektor Vostro 3750 dva USB 3.0 konektora, jedan USB 2.0 konektor i jedan eSATA/USB 2.
Ekran Dijagonala 337,82 mm (13,30 inča) Maksimalna rezolucija 1366 x 768 piksela pri 263.
Ekran Aktivna površina (X/Y) 344,23 mm x 193,54 mm Dimenzije: Visina 210,00 mm (8,26 inča) Širina 360,00 mm (14,17 inča) Dijagonala 396,24 mm (15,60 inča) Maksimalna rezolucija 1366 x 768 piksela pri 262.
Ekran Maksimalna veličina piksela 0,238 mm Baterija Vostro 3350 Tip • • "pametna" litijum-jonska sa 4 ćelije (2,8 Ah) "pametna" litijum-jonska sa 8 ćelija (2,8 Ah) Dimenzije: Dubina 4 ćelije — 43,45 mm (1,71 inča) 8 ćelija — 43,45 mm (1,71 inča) Visina 4 ćelije — 19,10 mm (0,75 inča) 8 ćelija — 42,36 mm (1,67 inča) Širina 4 ćelije — 199,10 mm (7,84 inča) 8 ćelija — 270,00 mm (10,63 inča) Težina 4 ćelije — 230,00 g (0,51 lb) 8 ćelija — 446,00 g (0,98 lb) Napon 14,8 VDC Vostro 3450/3550/3555 Tip
Baterija Širina 6 ćelija/ 9 ćelija — 255,60 mm (10,06 inča) Težina 6 ćelija — 340,00 g (0,75 lb) 9 ćelija — 504,50 g (1,11 lb) Napon 11,1 VDC Vostro 3750 Tip • • "pametna" litijum-jonska sa 6 ćelija (2,6 Ah) "pametna" litijum-jonska sa 9 ćelija (2,8 Ah) Dimenzije: Dubina 6 ćelija — 57,80 mm (2,27 inča) 9 ćelija — 57,80 mm (2,27 inča) Visina 6 ćelija — 20,80 mm (0,82 inča) 9 ćelija — 40,15 mm (1,58 inča) Širina 6 ćelija/ 9 ćelija — 255,60 mm (10,06 inča) Težina 6 ćelija — 340,00 g (0,75 lb) 9 ćelija
AC adapter Ulazni napon 100 VAC do 240 VAC Ulazna struja (maksimalna) 1,5 A / 1,6 A / 1,7 A / 2,3 A / 2,5 A Ulazna frekvencija 50 Hz do 60 Hz Izlazna snaga 65 W, 90 W ili 130 W NAPOMENA: AC adapter od 130 W je dostupan samo za Vostro 3750.
AC adapter Opseg temperatura: Operativna 0 °C do 35 °C (32 °F do 95 °F) Neoperativna –40 °C do 65 °C (–40 °F do 149 °F) Fizičke karakteristike Vostro 3350: Visina 27,30 mm do 29,80 mm (1,07 inča do 1,17 inča) Širina 329,20 mm (12,96 inča) Dubina 228,50 mm (9,00 inča) Težina (minimalna) 2,04 kg (4,50 lb) Vostro 3450: Visina 30,60 mm do 33,20 mm (1,20 inča do 1,31 inč) Širina 343,00 mm (13,50 inča) Dubina 245,80 mm (9,68 inča) Težina (minimalna) 2,28 kg (5,02 lb) Vostro 3550/3555: Visina
Okruženje Temperatura: Operativna 10 °C do 35 °C (50 °F do 95 °F) Skladištenje –40 °C do 65 °C (–40 °F do 149 °F) Relativna vlažnost (maksimalna): Operativna 10 % do 90 % (bez kondenzacije) Skladištenje 5 % do 95 % (bez kondenzacije) Nivo zagađenosti vazduha 112 G1 ili niže, definisano od strane ISA-S71.
Kontakt sa Dell-om 32 Kontakt s Dell-om NAPOMENA: Ako nemate aktivnu vezu sa Internetom, kontakt informacije možete pronaći na fakturi, otpremnici, računu ili katalogu Dell proizvoda. Dell nudi nekoliko opcija za onlajn i telefonsku podršku i servis. Dostupnost zavisi od zemlje i proizvoda, a neke usluge možda neće biti dostupne u vašoj oblasti. Ako želite da kontaktirate Dell u vezi prodaje, tehničke podrške ili pitanja u vezi korisničkih usluga: 1. posetite support.dell.com. 2.