Dell Vostro 3580 Setup and specifications guide Regulatory Model: P75F Regulatory Type: P75F010 November 2020 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 - 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Set up your computer................................................................................................... 5 Chapter 2: Create a USB recovery drive for Windows.................................................................... 7 Chapter 3: Chassis........................................................................................................................ 8 Display view................................................................................................
Security...........................................................................................................................................................................21 Secure boot...................................................................................................................................................................23 Intel Software Guard Extensions..........................................................................................................................
1 Set up your computer Steps 1. Connect the power adapter and press the power button. NOTE: To conserve battery power, the battery might enter power saving mode. 2. Finish Windows system setup. Follow the on-screen instructions to complete the setup. When setting up, Dell recommends that you: ● Connect to a network for Windows updates. NOTE: If connecting to a secured wireless network, enter the password for the wireless network access when prompted.
Table 1. Locate Dell apps (continued) Dell apps Details Download software applications including software that is purchased but not pre-installed on your computer. 4. Create recovery drive for Windows. NOTE: It is recommended to create a recovery drive to troubleshoot and fix problems that may occur with Windows. For more information, see Create a USB recovery drive for Windows.
2 Create a USB recovery drive for Windows Create a recovery drive to troubleshoot and fix problems that may occur with Windows. An empty USB flash drive with a minimum capacity of 16 GB is required to create the recovery drive. Prerequisites NOTE: This process may take up to an hour to complete. NOTE: The following steps may vary depending on the version of Windows installed. Refer to the Microsoft support site for latest instructions. Steps 1. Connect the USB flash drive to your computer. 2.
3 Chassis This chapter illustrates the multiple chassis views along with the ports and connectors and also explains the FN hot key combinations. Topics: • • • • • Display view Left view Right view Palmrest view Bottom view Display view 1. Camera 3. Microphone 2. Camera-status light 4. Display Left view 1. Power adapter port 3. HDMI port 5. USB 3.1 Gen 1 ports (2) 2. Battery status light 4. Network port 6. Headset port Right view 1. Micro SD card reader 3. VGA port 5.
4 Keyboard shortcuts NOTE: Keyboard characters may differ depending on the keyboard language configuration. Keys used for shortcuts remain the same across all language configurations. Table 2.
5 System specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information about the configuration of your computer, go to Help and Support in your Windows operating system and select the option to view information about your computer.
Table 4. Processor specifications Type UMA Graphics 8th Gen Intel Core i3 processor (2 cores/4 MB/4T/3.9 GHz/15 W) Intel UHD Graphics 620 8th Gen Intel Core i5 processor (4 cores/6 MB/8T/3.9 GHz/15 W) Intel UHD Graphics 620 8th Gen Intel Core i7 processor (4 cores/8 MB/8T/4.6 GHz/15 W) Intel UHD Graphics 620 Memory Table 5.
Audio Table 7. Audio specifications Feature Specifications Controller Realtek ALC3204 with Waves MaxxAudio Pro Type Two-channel high-definition audio Speakers Two (Directional speakers) Interface ● ● ● ● Internal speaker amplifier 2 W (RMS) per channel Universal audio jack High-quality speakers Noise reducing single microphone Stereo headset/mic combo System board connectors Table 8. System board connectors Feature Specifications M.
Camera Table 11. Camera specifications Feature Specifications Resolution ● Still image: 0.92 megapixels (HD) ● Video: 1280 x 720 (HD) at 30 fps Diagonal viewing angle Camera - 78.6° Number of cameras One Type HD fixed focus Sensor type CMOS sensor technology Video Max resolution 1280 x 720 (HD) at 30 fps Still image max resolution 0.92 megapixels (HD) Wireless Table 12. Wireless specifications Feature Specifications Type ● ● ● ● ● Maximum transfer rate 867 Mbps Frequency bands 2.
Table 13. Ports and connectors (continued) Features Specifications Video ● HDMI 1.4b (UMA and discrete) ● VGA port Network adapter One RJ-45 connector Display Table 14. Display specifications Feature Specifications Type ● 15.6 inch HD (1366 x 768) TN, Anti-glare, Ultra slim ● 15.6 inch FHD (1920 x 1080) TN, Anti-glare (Optional) Height (Active area) 360 mm (14.17 inch) Width (Active area) 224.3 mm (8.83 inch) Diagonal 396.24 mm (15.
Table 16. Touchpad specifications (continued) Feature Specifications Dimensions ● Width: 4.13 inch (105 mm) ● Height: 3.14 inch (80 mm) Multi-touch Supports four fingers Fingerprint reader—optional Table 17. Fingerprint reader specifications Feature Specifications Sensor technology Capacitive Sensor resolution 500 PPI Sensor area 5.5 mm x 4.4 mm (0.22 inches x 0.17 inches) Sensor pixel size 108 x 88 Operating system Table 18.
Table 19. Battery specifications (continued) Feature Specifications Operating time Varies depending on operating conditions and can significantly reduce under certain power-intensive conditions Temperature range: Operating 0°C to 35°C (32°F to 95°F) Temperature range: Storage -20°C to 65°C (-40°F to 149°F) Coin-cell battery CR 2032 Power adapter Table 20.
Table 22. Computer environment Operating Storage Temperature range 0°C to 40°C (32°F to 104°F) -40°C to 65°C (-40°F to 149°F) Relative humidity (maximum) 10% to 90% (non-condensing) NOTE: Maximum dew point temperature = 26°C 0% to 95% (non-condensing) NOTE: Maximum dew point temperature = 33°C Vibration (maximum) 0.66 GRMS 1.
Table 24.
6 System setup System setup enables you to manage your notebook hardware and specify BIOS level options.
Keys Navigation Esc Moves to the previous page until you view the main screen. Pressing Esc in the main screen displays a message that prompts you to save any unsaved changes and restarts the system. System setup options NOTE: Depending on the laptop and its installed devices, the items listed in this section may or may not appear. General options Table 25.
Table 26. System Configuration (continued) Option Description ● Enabled = The internal LAN is enabled. ● Enabled w/PXE = The internal LAN is enabled (with PXE boot) (selected by default) SATA Operation Allows you to configure the operating mode of the integrated hard drive controller.
Table 27. Security (continued) Option Description Password Bypass This option lets you bypass the System (Boot) Password and the internal HDD password prompts during a system restart. ● Disabled — Always prompt for the system and internal HDD password when they are set. This option is enabled by default. ● Reboot Bypass — Bypass the password prompts on Restarts (warm boots). NOTE: The system will always prompt for the system and internal HDD passwords when powered on from the off state (a cold boot).
Secure boot Table 28. Secure Boot Option Description Secure Boot Enable Allows you to enable or disable Secure Boot feature ● Secure Boot Enable This option is selected by default. Secure Boot Mode Allows you to modify the behavior of Secure Boot to allow evaluation or enforcement of UEFI driver signatures. ● Deployed Mode (default) ● Audit Mode Expert key Management Allows you to manipulate the security key databases only if the system is in Custom Mode.
Performance Table 30. Performance Option Description Multi Core Support This field specifies whether the process has one or all cores enabled. The performance of some applications improves with the additional cores. ● All—Default ● 1 Intel SpeedStep Allows you to enable or disable the Intel SpeedStep mode of processor. ● Enable Intel SpeedStep This option is set by default. C-States Control Allows you to enable or disable the additional processor sleep states.
Option Description ● Enable USB Wake Support Wake on WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a LAN signal. ● Disabled ● WLAN Default setting: Disabled Peak Shift This option enables you to minimize the AC power consumption during the peak power times of day. After you enable this option, your system runs only in battery even if the AC is attached.
Option Description ● 5 seconds ● 10 seconds Full Screen Log ● Enable Full Screen Logo—not enabled Warnings and errors ● Prompt on warnings and errors—enabled by default ● Continue on warnings ● Continue on warnings and errors Sign of Life Indication ● Enable Sign of Life Keyboard Backlight Indication—enabled by default Virtualization support Option Description Virtualization This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware capabilities provided by
Option Description Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default. BIOS Downgrade This controls flashing of the system firmware to previous revisions. Option 'Allow BIOS downgrade' is enabled by default. Data Wipe This field allows users to erase the data securely from all internal storage devices. Option 'Wipe on Next boot' is not enabled by default.
NOTE: System and setup password feature is disabled. Assigning a system setup password Prerequisites You can assign a new System or Admin Password only when the status is in Not Set. About this task To enter the system setup, press F2 immediately after a power-on or re-boot. Steps 1. In the System BIOS or System Setup screen, select Security and press Enter. The Security screen is displayed. 2. Select System/Admin Password and create a password in the Enter the new password field.
7 Software This chapter details the supported operating systems along with instructions on how to install the drivers. Topics: • Downloading drivers Downloading drivers Steps 1. Turn on the notebook. 2. Go to Dell.com/support. 3. Click Product Support, enter the Service Tag of your notebook, and then click Submit. NOTE: If you do not have the Service Tag, use the auto detect feature or manually browse for your notebook model. 4. Click Drivers and Downloads. 5.
8 Getting help Topics: • Contacting Dell Contacting Dell Prerequisites NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. About this task Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: Steps 1.
