Dell Vostro 3591 (With optical drive) Setup and specifications guide Regulatory Model: P75F Regulatory Type: P75F010
備註、提醒及警告 備註: 「備註」表示可以幫助您更有效地使用 產品的重要資訊。 警示: 「提醒」說明可能會損壞硬件或導致數據遺失,並告訴您如何避免問題。 警告: 「警告」表示有可能導致財產損失、人身傷害甚至死亡。 © 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. 2020 - 02 Rev.
Contents 1 Set up your computer................................................................................................................... 5 2 Create a USB recovery drive for Windows...................................................................................... 6 3 Chassis overview..........................................................................................................................7 Display view...............................................................................
Performance...................................................................................................................................................................24 Power management...................................................................................................................................................... 25 POST behavior........................................................................................................................................................
1 Set up your computer Steps 1. Connect the power adapter and press the power button. NOTE: To conserve battery power, the battery might enter power saving mode. 2. Finish Windows system setup. Follow the on-screen instructions to complete the setup. When setting up, Dell recommends that you: • • • Connect to a network for Windows updates. NOTE: If connecting to a secured wireless network, enter the password for the wireless network access when prompted.
2 Create a USB recovery drive for Windows Create a recovery drive to troubleshoot and fix problems that may occur with Windows. An empty USB flash drive with a minimum capacity of 16 GB is required to create the recovery drive. Prerequisites NOTE: This process may take up to an hour to complete. NOTE: The following steps may vary depending on the version of Windows installed. Refer to the Microsoft support site for latest instructions. Steps 1. Connect the USB flash drive to your computer. 2.
3 Chassis overview Display view 1. Camera 3. Microphone 2. Camera-status light 4.
Left view 1. 3. 5. 7. Power adapter port HDMI port USB 3.1 Gen 1 ports Headset port 2. Battery status light 4. Network port 6. USB 3.1 Gen 1 ports Right view 1. Micro SD card reader 3. Optical disk drive 8 Chassis overview 2. USB 2.0 port 4.
Palmrest view 1. Power button with optional fingerprint reader 2. Keyboard 3.
Bottom view 1. Speakers 3. Service Tag label 10 Chassis overview 2. Optical disk drive 4.
4 Keyboard shortcuts 備註: Keyboard characters may differ depending on the keyboard language configuration. Keys used for shortcuts remain the same across all language configurations. 表 2.
5 System specifications 備註: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information about the configuration of your computer, go to Help and Support in your Windows operating system and select the option to view information about your computer.
Chipset Table 4. Chipset Description Values Chipset Ice Lake U (ICL U) PCH-LP Processor • • DRAM bus width 64-bit Flash EPROM 16 + 8 MB PCIe bus Up to Gen 3.0 i5-1035G1 i7-1065G7 Operating system • • • Windows 10 Home (64-bit) Windows 10 Professional (64-bit) Ubuntu 18.04 LTS Memory Table 5.
Form factor Interface type Capacity M.2 2230 Solid State Drive PCIe NVMe 3x4 • • Class 35: 128 GB, 256 GB, 512 GB Class 40: 512 GB Ports and connectors Table 7. External ports and connectors Description Values External: Network One RJ-45 Port 10/100/1000 USB • • Audio 1 Universal Audio Jack Video HDMI Power adapter port 4.50 mm x 2.90 mm DC-in Security Wedge-shaped lock slot Card slot SD card slot 2 USB 3.0 Type 1 USB 2.0 Type A Table 8.
Video Table 10. Discrete graphics specifications Discrete graphics Controller External display support Memory size Memory type NVIDIA MX230 One HDMI port 2 GB GDDR5 Table 11. Integrated graphics specifications Integrated graphics Controller External display support Memory size Processor • • One HDMI port Shared system memory • • Intel® UHD Graphics GT2 Intel® Iris® Plus Graphics i5-1035G1 i7-1065G7 Camera Table 12.
Description Values Shortcut keys Some keys on your keyboard have two symbols on them. These keys can be used to type alternate characters or to perform secondary functions. To type the alternate character, press Shift and the desired key. To perform secondary functions, press Fn and the desired key. Communications Wireless module Table 14.
Description Values Output current (continuous) 3.34 A 2.31 A Rated output voltage 19.50 VDC 19.50 VDC Operating 0°C to 40°C (32°F to 104°F) 0°C to 40°C (0°F to 104°F) Storage -40°C to 70°C (-40°F to 158°F) -40°C to 70°C (-40°F to 158°F) Temperature range: Battery Table 17. Battery specifications Description Values Type Polymer battery, 3 cell 42WHr Voltage 11.40 VDC Weight (maximum) 0.2 kg (0.44 lb) Dimensions: Height 184.15 mm (7.25 in.) Width 97.15 mm (3.82 in.) Depth 5.
Description Values Weight 2.15 kg (4.75 lb) NOTE: The weight of your tablet depends on the configuration ordered and the manufacturing variability. Display Table 19. Display specifications Description Values Type High Definition - Non-Touch, Anti Glare, Ultra slim Panel technology Twisted Nematic Luminance (typical) 220 nits Dimensions (active area): Height 309.35 mm (12.18 in.) Width 173.99 mm (6.85 in.) Diagonal 355.60 mm (14.00 in.) Native resolution 1366x768 Megapixels 1.
Description Values Sensor pixel size 108 x 88 Security Table 21. Security Features Specifications Trusted Platform Module (TPM) 2.0 Integrated on system board Fingerprint reader Optional Contacted Smartcard reader Optional Contactless Smartcard reader Optional Kensington security lock slot Standard Protected slot/vent openings Standard Data security Table 22.
6 System setup System setup enables you to manage your hardware and specify BIOS level options.
System setup options 備註: Depending on the and its installed devices, the items listed in this section may or may not appear. General options 表 23. General Option Description System Information Displays the following information: • • • • System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date, Manufacture Date, and the Express Service Code.
Option Description Drives Allows you to enable or disable the various drives on-board: • • • • SATA-0 (enabled by default) SATA-1 (enabled by default) SATA-2 (enabled by default) M.2 PCIe SSD-0 (enabled by default) Smart Reporting This field controls whether hard drive errors for integrated drives are reported during system startup. The Enable Smart Reporting option is disabled by default.
Option Description Allow Non-Admin Password Changes - This option is enabled by default. Non-Admin Setup Changes Determines whether changes to the setup option are permitted when an administrator password is set. UEFI Capsule Firmware Updates This option controls whether this system allows BIOS updates via UEFI capsule update packages. This option is selected by default.
Option Description • Expert key Management Audit Mode Allows you to manipulate the security key databases only if the system is in Custom Mode. The Enable Custom Mode option is disabled by default. The options are: • • • • PK (default) KEK db dbx If you enable the Custom Mode, the relevant options for PK, KEK, db, and dbx appear.
Option Description • Enable Intel SpeedStep This option is set by default. C-States Control Allows you to enable or disable the additional processor sleep states. • C states This option is set by default. Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor. • Enable Intel TurboBoost This option is set by default. Hyper-Thread Control Allows you to enable or disable the HyperThreading in the processor.
Option Description Advanced Battery Charge Configuration This option enables you to maximize the battery health. By enabling this option, your system uses the standard charging algorithm and other techniques, during the non work hours to improve the battery health. Primary Battery Charge Configuration Allows you to select the charging mode for the battery.
Virtualization support Option Description Virtualization This field specifies whether a virtual Machine Monitor (VMM) can utilize the conditional hardware capabilities provided by Intel Virtualization Technology. Enable Intel Virtualization Technology—enabled by default. VT for Direct I/O Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by Intel® Virtualization technology for direct I/O. Enable VT for Direct I/O - enabled by default.
System logs Option Description BIOS Events Allows you to view and clear the System Setup (BIOS) POST events. Thermal Events Allows you to view and clear the System Setup (Thermal) events. Power Events Allows you to view and clear the System Setup (Power) events. SupportAssist System Resolution Option Description Auto OS Recovery Allows you to control the automatic boot flow for SupportAssist System.
• • • • A password can have up to 32 characters. The password can contain the numbers 0 through 9. Only lower case letters are valid, upper case letters are not allowed. Only the following special characters are allowed: space, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`). 3. Type the system password that you entered earlier in the Confirm new password field and click OK. 4. Press Esc and a message prompts you to save the changes. 5. Press Y to save the changes. The computer reboots.
7 Software This chapter details the supported operating systems along with instructions on how to install the drivers. 主題: • Downloading drivers Downloading drivers 步驟 1. Turn on the . 2. Go to Dell.com/support. 3. Click Product Support, enter the Service Tag of your , and then click Submit. 備註: If you do not have the Service Tag, use the auto detect feature or manually browse for your model. 4. Click Drivers and Downloads. 5. Select the operating system installed on your . 6.
8 Getting help 主題: 聯絡 Dell • 聯絡 Dell 事前準備作業 備註: 如果您沒有有效的互聯網連線,則您可以在購機發票、裝箱單、賬單或 Dell 產品目錄中找到聯絡資料。 關於此工作 Dell 提供多種線上和電話支援與服務選項。可用性依國家/地區及產品而異,且某些服務在您所在地區可能無法使用。如需聯絡 Dell 解決銷售、技術支援和客戶服務問題,請: 步驟 1. 轉至 Dell.com/support。 2. 選擇您的支援類別。 3. 在頁面底部的選擇國家/地區下拉清單中確認您所在國家或地區。 4.