Service Manual
Table Of Contents
- Dell™ Vostro™ 420/220/220s Service Manual
- Troubleshooting
- Working on Your Computer
- Computer Cover
- Bezel
- Chassis Support Bracket
- PCI and PCI Express Cards
- Drives
- I/O Panel
- Fan
- Processor Heat Sink/Fan Assembly
- Memory Module(s)
- Power Supply
- Coin-Cell Battery
- System Board
- Processor
- System Setup Program
- Contacting Dell
72 Drives
Vostro 220
6
Connect the power and data cables to the back of the drive.
NOTICE: The connectors are "keyed" for correct insertion; that is, a notch or a
missing pin on one connector fits with a tab or a filled-in hole on the other
connector. Align the cable connectors correctly before inserting them to avoid
damage to the connectors.
7
Ensure that the other end of the data cable is connected to an interface
connector labeled "SATA0," "SATA1," "SATA2," or "SATA3" on the system
board (see "System Board Components" on page 40).
1 screws (4) 2 hard drive
3 power cable 4 data cable
2
1
4
3