Owner's Manual

Adding and Replacing Parts 115
Replacing the Keyboard
1 Slide the keyboard cable into the keyboard connector.
2 Rotate the keyboard connector latch to secure the cable.
3 Hook the tabs along the front edge of the keyboard into the palmrest.
4 Press on the right edge near the top to snap the keyboard into place.
5 Replace the two screws on the top of the keyboard.
1 screws (2) 2 keyboard
3 keyboard tabs (5) 4 keyboard cable
5 keyboard connector latch
1
2
4
3
5
book.book Page 115 Thursday, August 7, 2008 5:00 PM