Dell Vostro 5471 دليل المالك النموذج الرقابيP88G : النوع الرقابيP88G001 :
الملاحظات والتنبيهات والتحذيرات ملاحظة :تشير كلمة "ملاحظة" إلى معلومات هامة تساعدك على تحقيق أقصى استفادة من المنتج الخاص بك. تنبيه :تشير كلمة "تنبيه" إما إلى احتمال حدوث تلف بالأجهزة أو فقدان للبيانات ،كما تعلمك بكيفية تجنب المشكلة. تحذير :تشير كلمة "تحذير" إلى احتمال حدوث ضرر بالممتلكات أو التعرض لإصابة جسدية أو الوفاة. حقوق الطبع والنشر © لعام 2016محفوظة لشركةأو الشركات التابعة لها .جميع الحقوق محفوظة .
جدول المحتويات 1العمل على الكمبيوتر الخاص بك7 ............................................................................................................................................. تعليمات السلامة7 ..................................................................................................................................................................................... 7 ............................................................................................................
لوحة اللمس27 ......................................................................................................................................................................................... إزالة لوحة اللمس27 ........................................................................................................................................................................... تركيب لوحة اللمس28..............................................................................................
48 .......................................................................................................................................................1.4 خصائص HDMI ميزات 48 ..............................................................................................................................................................................HDMI 4مواصفات النظام49 ........................................................................................................................
6البرامج73 ...................................................................................................................................................................... عمليات تهيئة نظام التشغيل73 ..................................................................................................................................................................... تنزيل برامج التشغيل73 .........................................................................................................
1 العمل على الكمبيوتر الخاص بك الموضوعات: • تعليمات السلامة • إيقاف تشغيل جهاز الكمبيوتر الخاص بك — Windows 10 • قبل العمل داخل الكمبيوتر • بعد العمل داخل جهاز الكمبيوتر الخاص بك تعليمات السلامة استعن بتوجيهات السلامة التالية لحماية جهاز الكمبيوتر الخاص بك من أي تلف محتمل وضمان سلامتك الشخصية .وما لم يتم توضيح غير ذلك ،يفترض كل إجراء من الإجراءات المضمنة في هذا المستند توفر الشروط التالية: • قيامك بقراءة معلومات الأمان الواردة مع الكمبيوتر.
قبل العمل داخل الكمبيوتر 1 تأكد أن سطح العمل مسطح ونظيف لوقاية غطاء جهاز الكمبيوتر من التعرض للخدوش. 2 قم بإيقاف تشغيل جهاز الكمبيوتر الخاص بك. إذا كان الكمبيوتر موصلاً بجهاز إرساء ،قم بفك إرسائه. 4 افصل كل كبلات الشبكة من الكمبيوتر( في حالة التوفر). 3 تنبيه :إذا كان جهاز الكمبيوتر لديك يحتوي على منفذ ،RJ45فقم بفصل كبل الشبكة عن طريق فصل الكبل من جهاز الكمبيوتر.
2 إزالة المكونات وتركيبها غطاء القاعدة إزالة غطاء القاعدة 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك. 2 لإزالة غطاء القاعدة: a b قم بإزالة المسامير اللولبية M2.5 x 6الثمانية [].1 قم بفك المسمارين اللولبيين ].2[ M2.5 x 6 c ارفع غطاء القاعدة من الحافة[ ].1 d ملاحظة :قد تحتاج إلى مخطاط بلاستيكي لرفع غطاء القاعدة من الحافة. ارفع غطاء القاعدة بعيداً عن النظام[ ].
تركيب غطاء القاعدة 2 قم بمحاذاة غطاء القاعدة مع حوامل المسامير اللولبية الموجودة في جهاز الكمبيوتر. اضغط على حواف الغطاء حتى يستقر في مكانه محدث ًا صوت طقطقة. 1 3 أحكم ربط المسمارين اللولبيين M2.5 x 6الثلاثة. 4 أحكم ربط المسامير اللولبية M2.5 x 6الثمانية لتثبيت غطاء القاعدة في الكمبيوتر. 5 اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك.
d e قم بإزالة المسامير اللولبية M2.0 x 3الأربعة[ ].1 ارفع البطارية بعيداً عن النظام[ ].
تركيب البطارية 1 قم بتركيب البطارية في الفتحة في جهاز الكمبيوتر. 2 قم بتوصيل كابل البطارية بالموصل الموجود في لوحة النظام. 3 قم بتوصيل كابل محرك الأقراص الثابتة بالموصل الموجود في لوحة النظام وأغلق المزلاج. 4 أعد وضع المسامير اللولبية M2.0 x 3الأربعة لتثبيت البطارية بالنظام. 5 قم بتركيب غطاء القاعدة. 6 اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك.
تركيب مكبر الصوت 1 قم بمحاذاة مكبرات الصوت بطول الفتحات الموجودة على الجهاز. 2 قم بتوجيه كابل مكبر الصوت خلال ألسنة التوجيه الموجودة في النظام. 3 قم بتوصيل كابل مكبر الصوت بلوحة النظام. 4 قم بتركيب: a b 5 البطارية غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. محرك الأقراص الثابتة إزالة محرك الأقراص الثابتة 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك.
4 لإزالة محرك الأقراص الثابتة: a b 14 قم بإزالة المسامير اللولبية M2.0 x 3الأربعة التي تثبت محرك الأقراص الثابتة بالنظام[ ].1 ارفع محرك الأقراص الثابتة بعيداً عن النظام[ ].
تركيب محرك الأقراص الثابتة 1 أدخل محرك الأقراص الثابتة في الفتحة الموجودة في جهاز الكمبيوتر. 2 أعد وضع المسامير اللولبية M2.0 x 3الأربعة لتثبيت مجموعة محرك الأقراص الثابتة في النظام. 3 ِثبّت كبل محرك الأقراص الثابتة الموجود على البطارية. قم بتوصيل كابل محرك الأقراص الثابتة بالموصل الموجود في لوحة النظام. 5 قم بتركيب: 4 a b 6 البطارية غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك.
تركيب البطارية الخلوية المصغرة 1 ضع البطارية الخلوية المصغرة في الفتحة الموجودة في لوحة النظام. 2 قم بتوصيل كابل البطارية الخلوية الصغيرة بالموصل الموجود في لوحة النظام. 3 قم بتركيب غطاء القاعدة. 4 اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. محرك أقراص مزود بذاكرة مصنوعة من مكونات صلبة -اختياري إزالة محرك الأقراص المزود بذاكرة مصنوعة من مكونات صلبة SSD -من نوع M.
تركيب محرك الأقراص المزود بذاكرة مصنوعة من مكونات صلبة ( - )SSDمن نوع M.2 1 قم بمحاذاة السن الموجود في محرك أقراص الحالة الثابتة مع اللسان الموجود في فتحة محرك أقراص الحالة الثابتة. 2 قم بإزاحة محرك الأقراص المزود بذاكرة مصنوعة من مكونات صلبة في الفتحة. 3 أعد وضع المسمار اللولبي M2.0 x 3لتثبيت محرك الأقراص المزود بذاكرة مصنوعة من مكونات صلبة( ) SSDبالنظام. 4 قم بتركيب غطاء القاعدة. 5 اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك.
تركيب بطاقة الشبكة اللاسلكية محلية النطاق ()WLAN 1 أدخل بطاقة WLANفي الفتحة الموجودة في النظام. 2 قم بتوصيل كابلات WLANبالموصلات الموجودة في بطاقة .WLAN 3 ضع الحامل وأعد وضع المسمار اللولبي M2.0 x 4لتثبيته بالنظام. 4 قم بتركيب غطاء القاعدة. 5 اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. مروحة النظام إزالة مروحة النظام 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك.
تركيب مروحة النظام 1 ضع مروحة النظام في الفتحة الموجودة في النظام. 2 أعد وضع المسمارين اللولبيين M2.0 x 4لتثبيتها بالنظام. 3 قم بتوصيل كبل مروحة المعالج بالموصل الموجود على لوحة النظام. 4 قم بتركيب غطاء القاعدة. 5 اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. المشتت الحراري إزالة المشتت الحراري 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك. 2 قم بإزالة.
تركيب وحدة المشتت الحراري 1 ضع المشتت الحراري في الفتحة الخاصة به في النظام. 2 أحكم ربط المسامير اللولبية M2.0 x 3السبعة لتثبيت المشتت الحراري في لوحة النظام. 3 قم بتركيب: a b 4 مروحة النظام غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. لوحة وحدة الإدخال/الإخراج إزالة لوحة وحدة الإدخال/الإخراج 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك.
d e قم بإزالة المسمارين المسمارين اللولبيين M2.0 x 4اللذين يثبتان لوحة وحدة الإدخال/الإخراج( ) I/Oفي النظام[ ].1 ارفع لوحة وحدة الإدخال/الإخراج( ) I/Oبعيداً عن النظام.
تركيب لوحة وحدة الإدخال/الإخراج 1 ضع لوحة وحدة الإدخال/الإخراج( ) I/Oفي فتحتها بالنظام. 2 أعد وضع المسمارين اللولبيين M2.0 x 4لتثبيت لوحة وحدة الإدخال/الإخراج في لوحة النظام. 3 قم بتوصيل كابل وحدة الإدخال/الإخراج( ) I/Oوكابل بصمات الأصابع وأغلق المزلاج لتثبيته في لوحة وحدة الإدخال/الإخراج( ).
3 لإزالة زر التيار: a b c قم بإزالة المسمارين اللولبيين M2.5 x 6اللذين يثبتان مفصلة الشاشة اليمنى بالنظام[ ].1 ارفع مفصلة الشاشة[ ].2 ارفع المزلاج وافصل كابل زر التشغيل عن الموصل الموجود في لوحة بصمات الأصابع. d e قم بإزالة المسمارين اللولبيين M2.0 x 3المثبتين لزر التشغيل بالنظام[ ].1 ارفع الزر بعيداً عن النظام[ ].
تثبيت زر التيار. 1 ضع زر التشغيل في الفتحة الخاصة به في النظام. 2 أعد وضع المسامير اللولبية لتثبيت زر التشغيل في النظام. 3 قم بتوصيل كابل التيار بالموصل الموجود في لوحة بصمات الأصابع. 4 أغلق مفصلة الشاشة وثبتها باستخدام المسمارين اللولبيين M2.5 x 4في النظام. 5 قم بتركيب: a b c 6 لوحة وحدة الإدخال /الإخراج( )I/O WLAN غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك.
c d e 3 مروحة النظام المشتت الحراري محرك الأقراص المزود بذاكرة مصنوعة من مكونات صلبة( )SSD لإزالة لوحة النظام: a b c d افصل الكبلات التالية: • كابل لوحة وحدة الإدخال/الإخراج( ]2 ،1[) I/O • كابل لوحة وحدة الإدخال/الإخراج( ]3[) I/O • كابل الإضاءة الخلفية للوحة المفاتيح[ ]4 • كابل لوحة المفاتيح ولوحة اللمس[ ]5 افصل كابل ] 1[ eDPوكابل منفذ مهايئ التيار[ ] 2وكابل مكبر الصوت[ ] 5عن الموصل.
e f 26 قم بإزالة المسامير اللولبية M2.0 x 2الثلاثة التي تثبت لوحة النظام في النظام[ ].1 ارفع لوحة النظام وقم بإزالتها من النظام[ ].
تركيب لوحة النظام 1 قم بمحاذاة فتحات المسامير اللولبية الموجودة في لوحة النظام مع فتحات المسامير اللولبية الموجودة في النظام. 2 أعد وضع المسامير اللولبية M2.0 x 2الثلاثة لتثبيت لوحة النظام بالكمبيوتر. 3 قم بمحاذاة فتحات المسامير اللولبية لحامل منفذ USBمن النوع Cمع فتحات المسامير اللولبية الموجودة في لوحة النظام ،ثم أعد وضع المسمارين اللولبيين لتثبيت الحامل بالنظام.
c قم بفك المسامير اللولبية M2.0 x 2الثلاثة التي تثبت حامل دعم لوحة اللمس بالنظام وارفع لوحة اللمس بعيداً عن النظام[ ].2 ،1 تركيب لوحة اللمس 1 أعد وضع المسامير اللولبية الثلاثة لتثبيت حامل دعم لوحة اللمس في النظام. 2 قم بتوصيل كابل لوحة اللمس بالموصل الموجود في النظام. 3 أعد وضع المسامير اللولبية الأربعة لتثبيت لوحة اللمس في النظام.
c ارفع مجموعة الشاشة وقم بإزاحتها. d المكون المتبقي لك هو مجموعة الشاشة.
تركيب مجموعة الشاشة 1 قم بمحاذاة مجموعة الشاشة ووضعها في النظام. 2 ضع حامل المفصلة في النظام وأعد وضع المسامير اللولبية لتثبيت مجموعة الشاشة في النظام. 3 قم بتوصيل كابل eDPبالموصل الموجود في لوحة النظام. 4 قم بتركيب: a b 5 بطاقة WLAN غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. إطار الشاشة إزالة إطار الشاشة 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك.
b قم بإزالة إطار الشاشة من مجموعة الشاشة. تركيب إطار الشاشة 1 ضع إطار الشاشة على مجموعة الشاشة. 2 بداية من الركن الأعلى ،اضغط على إطار الشاشة وتعامل بطول الإطار بالكامل حتى يتم النقر عليه لعرض مجموعة الشاشة.
3 قم بتركيب: a b c 4 مجموعة الشاشة بطاقة WLAN غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. الكاميرا إزالة الكاميرا 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك. 2 قم بإزالة: a b c d 3 لإزالة الكاميرا: a b c 32 غطاء القاعدة بطاقة WLAN مجموعة الشاشة إطار الشاشة قم بإزاحة الكاميرا من مجموعة الشاشة باستخدام مخطاط بلاستيكي[ ].
تركيب الكاميرا 1 قم بمحاذاة الكاميرا ووضعها في فتحتها الموجودة في مجموعة الشاشة. 2 قم بتوصيل كابل الكاميرا بالموصل الموجود في مجموعة الشاشة. 3 قم بتركيب: a b c d 4 إطار الشاشة مجموعة الشاشة بطاقة WLAN غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. لوحة الشاشة إزالة لوحة الشاشة 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك.
e المكون المتبقي لك هو لوحة الشاشة. تركيب لوحة الشاشة 1 قم بتوصيل كابل eDPبالموصل. 2 قم بلصق الشريط اللاصق لتثبيت كابل .eDP 3 أعد وضع لوحة الشاشة لمحاذاتها مع حوامل المسامير اللولبية الموجودة في مجموعة الشاشة. 4 أعد وضع المسامير اللولبية الأربعة لتثبيت لوحة الشاشة بمجموعة الشاشة.
5 قم بتركيب: a b c d 6 إطار الشاشة مجموعة الشاشة بطاقة WLAN غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. مفصلات الشاشة إزالة مفصلة الشاشة 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك.
3 قم بتركيب: a b c d e 4 لوحة شاشة العرض إطار الشاشة مجموعة الشاشة بطاقة WLAN غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. دخل التيار المستمر إزالة دخل التيار المستمر 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك.
تركيب دخل التيار المستمر 1 ضع دخل التيار المستمر وقم بتوصيله بالفتحة الخاصة به في النظام. 2 قم بتوصيل كابل منفذ مهايئ التيار بالموصل الموجود في لوحة النظام. 3 ضع مفصلة الشاشة اليمنى وأعد وضع المسامير اللولبية الثلاثة لتثبيت المفصلة في النظام. 4 قم بتركيب: a b c 5 مجموعة الشاشة بطاقة WLAN غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك.
38 c ارفع حامل لوحة المفاتيح بعيداً عن النظام. d e قم بإزالة المسامير اللولبية الأربعة المثبتة للوحة المفاتيح في مسند راحة اليد[ ]1 ارفع لوحة المفاتيح بعيداً عن النظام[ ].
تركيب لوحة المفاتيح 1 ضع لوحة المفاتيح في الفتحة الموجودة على مسند راحة اليد. 2 أعد وضع المسامير اللولبية التي تثبت لوحة المفاتيح في مسند راحة اليد. 3 ضع حامل لوحة المفاتيح فوق لوحة المفاتيح في فتحة النظام. 4 أعد وضع المسامير اللولبية التي تثبت لوحة المفاتيح في النظام.
cمكبر الصوت dلوحة اللمس eمروحة النظام fالمشتت الحراري gمحرك الأقراص المزود بذاكرة مصنوعة من مكونات صلبة( )SSD hبطاقة WLAN iلوحة وحدة الإدخال /الإخراج( )I/O jزر التشغيل kمحرك الأقراص الثابتة lلوحة النظام mلوحة المفاتيح nمجموعة الشاشة ملاحظة :بعد إزالة جميع المكونات ،يكون المكون المتبقي لك هو مسند راحة اليد 3 قم بتركيب المكونات التالية في مسند راحة اليد الجديد: aمجموعة الشاشة bلوحة المفاتيح cلوحة النظام dمح
كابل eDP إزالة كابل eDP 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك. 2 قم بإزالة: a b c d e f g 3 غطاء القاعدة بطاقة WLAN مجموعة الشاشة إطار الشاشة الكاميرا لوحة شاشة العرض مفصلة الشاشة قم بفك كابل eDPمن قناة التوجيه لإزالته من الشاشة. تركيب كابل eDP 1 ضع كابل eDPفي لوحة الشاشة. 2 قم بتوجيه كابل eDPخلال قناة التوجيه.
f g 4 بطاقة WLAN غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك. مجموعة الغطاء الخلفى للشاشة إزالة الغطاء الخلفي للشاشة 1 اتبع الإجراءات الواردة في قبل العمل داخل جهاز الكمبيوتر الخاص بك.
f g h 3 مجموعة الشاشة بطاقة WLAN غطاء القاعدة اتبع الإجراءات الواردة في بعد العمل داخل جهاز الكمبيوتر الخاص بك.
3 التكنولوجيا والمكونات يتناول هذا الفصل التكنولوجيا والمكونات المتوفرة في النظام. الموضوعات: • DDR4 • ميزات USB • موصل USBمن النوع C • HDMI 1.4 DDR4 ت ُعد ذاكرة ( DDR4معدل نقل البيانات المزدوج من الجيل الرابع )بمثابة ذاكرة فائقة السرعة تأتي خلفًا لتقنيتي DDR2و DDR3وهي تسمح بسعة تصل إلى 512جيجابايت ،بالمقارنة بالسعة القصوى لـ DDR3البالغة 128جيجابايت لكل .
السمك شكل .2الفرق في ُ الحافة المنحنية تتميز وحدات DDR4بحافة منحنية للمساعدة في الإدخال وتقليل الضغط على لوحة الدائرة المطبوعة( ) PCBأثناء تركيب الذاكرة. شكل .3الحافة المنحنية أخطاء الذاكرة تعرض أخطاء الذاكرة على النظام رمز فشل ON-FLASH-FLASHأو ON-FLASH-ONالجديد .إذا فشلت جميع وحدات الذاكرة ،فلن يتم تشغيل شاشة .
• زيادة الحد الأقصى لطاقة الناقل وزيادة سحب تيار الجهاز لكي يستوعب الأجهزة التي تحتاج إلى الطاقة بشكل أفضل • خصائص جديدة لإدارة الطاقة • عمليات نقل بيانات مزدوجة الاتجاه كاملة ودعم أنواع النقل الجديدة • توافق USB 2.0مع الإصدارات السابقة • الموصلات والكابلات الجديدة شيوعا بشأن منفذ USB 3.0/USB 3.1من الجيل الأول. تغطي الموضوعات التالية بعض الأسئلة الأكثر ً السرعة حاليًا ،يتوفر 3أوضاع سرعة يتم تحديدها وفقًا لأحدث مواصفات منفذ USB 3.0/USB 3.
نظرا لأن السرعة البالغة 480ميجابت/ث كانت محدودة ،تكون السرعة البالغة 5جيجابت/ث واعدة .بفضل السرعة يتطلب DVIأحادي الوصلة سعة معالجة تبلغ 2جيجابت/ث تقريبًاً . الواعدة البالغة 4.8جيجابت/ث ،سيتطابق المعيار مع بعض المنتجات التي لم تكن تمثل سابقًا وحدة ,USBمثل أنظمة التخزين RAIDالخارجية. فيما يلي بعض منتجات SuperSpeed USB 3.0/USB 3.1من الجيل الأول المتاحة.
تلك الشاشة الخارجية الكمبيوتر المحمول عند استخدامه كشاشة خارجية -كل ذلك عبر وصلة USBواحدة صغيرة من النوع .Cلاستخدام هذا الخيار ،يجب أن يدعم الجهاز والكابل تزويد تيار .USBإذ لا يعني بالضرورة توفر اتصال USBمن النوع Cأنهما يدعمان هذه الخاصية. موصل USBمن النوع Cوموصل 3.1 USB USB 3.1هو معيار USBجديد .عرض النطاق الترددي النظري لموصل USB 3هو 5جيجابت في الثانية ،في حين أن عرض النطاق الترددي لموصل USB 3.1هو 10جيجابت في الثانية .
4 مواصفات النظام مواصفات النظام الميزة المواصفات نوع المعالج Intel Kaby Lakeمن الفئة Uرباعي المراكز مجموعة شرائح النظام مدمجة مع المعالج إجمالي حجم ذاكرة التخزين المؤقت • ذاكرة تخزين مؤقت سعة 8ميجابايت -معالج Intel Core i7من الجيل الثامن • ذاكرة تخزين مؤقت سعة 6ميجابايت -معالج Intel Core i5من الجيل الثامن الذاكرة الميزة المواصفات النوع DDR4 السرعة 2133/2400ميجاهرتز الموصلات 2 السعة 4جيجابايت ،أو 8
المواصفات الميزة • ميكروفونات المصفوفة الرقمية مواصفات الاتصال الميزة المواصفات مهايئ إيثرنت بطاقة واجهة شبكة تدعم الاتصال بسرعة 1000/100/10ميجابت في الثانية الاتصال اللاسلكي خيارات شبكة :WLAN • شبكة + DW1820 2x2 ac 802.11acتقنية BT4.
الميزة المواصفات • شاشة LCDمقاس 14بوصة فائقة الدقة ضد التوهج بإضاءة خلفية بمؤشر LED زاوية التشغيل 0درجة( مغلقة )حتى 135درجة معدل التحديث 60هرتز أفقية الدقة الفائقة بالكامل( )80/80/80/80 رأسية الدقة الفائقة بالكامل( )80/80/80/80 لوحة المفاتيح الميزة عدد المفاتيح التصميم المواصفات • مفتاحا الولايات المتحدة80 : ً • مفتاحا المملكة المتحدة81 : ً • مفتاحا اليابان84 : ً • مفتاحا البرازيل82 : ً QWER
• محرك أقراص مزود بذاكرة مصنوعة من مكونات صلبة( ) SSDمن نوع M.2سعة 256جيجابايت • محرك أقراص مزود بذاكرة مصنوعة من مكونات صلبة( ) SSDمن نوع M.2سعة 512جيجابايت • محرك أقراص ثابتة( ) HDDمزود بمستشعر السقوط المطلق( )FFS مواصفات البطارية الميزة المواصفات القدرة الكهربائية بالوات بطارية ليثيوم أيون/بوليمر( ثلاثية الخلايا )بقدرة 42وات في الساعة النوع ليثيوم أيون/بوليمر الطول 175.36مم( 6.90بوصات) الارتفاع 5.9مم( 0.
المواصفات الميزة الوزن • 65وات 108 :مم( 4.25بوصة) • 45وات 170 :جرام • 65وات 265 :جرام نطاق درجة الحرارة: من 0درجة مئوية إلى 40درجة مئوية عند التشغيل من 0إلى 40درجة مئوية( من 32إلى 104درجة فهرنهايت) في حالة عدم التشغيل من 40-درجة مئوية إلى 70درجة مئوية( من 40-درجة فهرنهايت إلى 158درجة فهرنهايت) المواصفات المادية الميزة المواصفات الوزن 1.685كجم( 3.
5 إعداد النظام يتيح لك إعداد النظام إمكانية إدارة أجهزة الكمبيوتر المحمول وتخصيص خيارات مستوى نظام الإدخال والإخراج الأساسي( ).
المفاتيح الانتقال شريط المسافة تقوم بتوسيع أو طي قائمة منسدلة ،في حالة تطبيقها. Tab تنتقل إلى منطقة التركيز التالية. ملاحظة :بالنسبة لمستعرض الرسومات القياسية فقط. للانتقال إلى الصفحة السابقة حتى تعرض الشاشة الرئيسية .يؤدي الضغط على المفتاح Escفي الشاشة الرئيسية إلى عرض رسالة تطالبك بحفظ أي تغييرات غير محفوظة وإعادة تشغيل النظام.
الوصف الخيار • • Date/Time دائما ً ( Neverأبدا ً) يتيح لك إمكانية ضبط التاريخ والوقت .يسري تطبيق التغييرات في تاريخ ووقت النظام على الفور. تهيئة النظام جدول .3تهيئة النظام الخيار الوصف Integrated NIC تتيح لك تهيئة وحدة التحكم المدمجة في الشبكة. انقر فوق أحد الخيارات التالية: • • • SATA Operation معطل ممكن ممكن مع -PXEالإعداد الافتراضي يسمح لك بتهيئة وضع تشغيل وحدة التحكم في محرك الأقراص الثابتة SATAالمدمجة.
الخيار الوصف USB PowerShare يعمل هذا الحقل على تهيئة سلوك ميزة .USB PowerShareيتيح لك هذا الخيار شحن الأجهزة الخارجية باستخدام طاقة بطارية النظام المخزنة من خلال ميزة USB ( PowerShareمعطلة بشكل افتراضي). • Enable PowerShare يسمح لك هذ الخيار بتمكين أو تعطيل وحدة التحكم المدمجة .بشكل افتراضي ،يتم تحديد الخيار تمكين الصوت. الصوت الخيارات هي: • • تمكين الميكروفون تمكين مكبر الصوت الداخلي يتم تعيين هذا الخيار افتراضيًا.
الأمان جدول .5الأمان الخيار الوصف Admin Password يتيح لك تعيين كلمة مرور المسؤول( ) adminأو تغييرها أو حذفها. الإدخالات اللازمة لتعيين كلمة المرور هي: • • • إدخال كلمة المرور القديمة: إدخال كلمة المرور الجديدة: تأكيد كلمة المرور الجديدة: انقر فوق موافق فور تعيين كلمة المرور. ملاحظة :عند تسجيل الدخول للمرة الأولى ،يتم تمييز حقل "إدخال كلمة المرور القديمة ":بعبارة "غير معينة" .
الوصف الخيار هذا الخيار غير معين افتراضيًا. Password Configuration يمكنك تحديد طول كلمة المرور .الحد الأدنى = ،4والحد الأقصى = 32 Password Bypass يتيح لك تجاوز كلمة مرور النظام وكلمة مرور محرك الأقراص الثابتة( ) HDDالداخلية ،عند تعيينها ،أثناء إعادة تشغيل النظام. انقر فوق أحد الخيارات: • • Password Change معطل -الإعداد الافتراضي تجاوز إعادة التمهيد يتيح لك تغيير كلمة مرور النظام عند تعيين كلمة مرور المسؤول.
الوصف الخيار يتم تعيين هذا الخيار افتراضيًا. Admin Setup Lockout تتيح لك إمكانية منع المستخدمين من الدخول إلى الإعداد عند تعيين كلمة مرور المسؤول. • تمكين قفل الإعداد الإداري هذا الخيار غير معين افتراضيًا. Master Password Lockout يتيح لك تعطيل دعم كلمة المرور الرئيسية. • تمكين قفل كلمة المرور الرئيسية هذا الخيار غير معين افتراضيًا. ملاحظة :يلزم مسح كلمة مرور محرك الأقراص الثابتة قبل أن يتسنى تغيير الإعدادات. التمهيد الآمن جدول .
الوصف الخيار • Enclave Memory Size تحكم بواسطة البرامج -الإعداد الافتراضي يعين هذا الخيار حجم الذاكرة الاحتياطية المخصصة .SGX انقر فوق أحد الخيارات التالية: • • • 32ميجابايت 64ميجابايت 128ميجابايت— الإعداد الافتراضي الأداء جدول .8الأداء الخيار الوصف Multi Core Support يحدد هذا الحقل ما إذا كان المعالج يتمتع بتمكين مركز واحد أو كل المراكز .يتحسن أداء بعض التطبيقات مع وجود مراكز إضافية.
إدارة الطاقة جدول .9إدارة الطاقة الخيار الوصف AC Behavior يتيح لك تمكين أو تعطيل خاصية التشغيل التلقائي لجهاز الكمبيوتر عند توصيل مهايئ تيار متردد. • التشغيل بالتيار المتردد هذا الخيار غير معين افتراضيًا. Enable Intel Speed Shift Technology Auto On Time يتيح لك تمكين أو تعطيل تقنية .Intel Speed Shift Technology • ممكن -الإعداد الافتراضي تتيح لك إمكانية ضبط الوقت الذي يجب عند حلوله أن يتم تشغيل الكمبيوتر تلقائيًا.
سلوك الاختبار الذاتي عند بدء التشغيل ()POST جدول .10سلوك الاختبار الذاتي عند بدء التشغيل ()POST الخيار الوصف Adapter Warnings تتيح لك تمكين أو تعطيل رسائل تحذير إعداد النظام( ) BIOSعند استخدام مهايئات طاقة معينة. • Fn Lock Options تمكين تحذيرات المهايئ— الإعداد الافتراضي يمكنك من السماح لمجموعات مفاتيح الاختصار Fn + Escبتغيير السلوك الرئيسي للمفاتيح من F1إلى ،F12بين وظائفها القياسية والثانوية.
دعم المحاكاة الافتراضية جدول .11دعم المحاكاة الافتراضية الخيار الوصف Virtualization يحدد هذا الخيار ما إذا كان بإمكان شاشة الجهاز الافتراضي( ) VMMاستخدام إمكانات الأجهزة الإضافية التي تقدمها تقنية Intel Virtualizationأم لا. • تمكين تقنية المحاكاة الافتراضية من Intel يتم تعيين هذا الخيار افتراضيًا.
الوصف الخيار هذا الخيار غير معين افتراضيًا. BIOS Downgrade يتيح لك تحديث الإصدارات السابقة من البرامج الثابتة للنظام. • تتيح إرجاع BIOSإلى إصدار سابق يتم تعيين هذا الخيار افتراضيًا. يتيح لك مسح البيانات من جميع أجهزة التخزين الداخلية بشكل آمن. Data Wipe • Wipe on Next Boot هذا الخيار غير معين افتراضيًا. استرداد BIOSمن محرك الأقراص الثابتة— هذا الخيار معين بشكل افتراضي .
تحديث نظام الإدخال/الإخراج الأساسي ( )BIOSفي نظام التشغيل Windows يوصى بتحديث ( BIOSإعداد النظام )عند استبدال لوحة النظام أو في حالة توفر تحديث .بالنسبة لأجهزة الكمبيوتر المحمولة ،تأكد من أن بطارية الكمبيوتر لديك مشحونة بالكامل ومن أنها متصلة بمخرج طاقة. ملاحظة :إذا تم تمكين ،BitLockerفيجب تعليقه قبل تحديد نظام الإدخال والإخراج الأساسي( ) BIOSللنظام ،ثم إعادة تمكينه بعد اكتمال تحديث .BIOS 1 أعد تشغيل الكمبيوتر. 2 اذهب إلى .Dell.
4 أعد تشغيل النظام واضغط على F12عند ظهور شعار Dellعلى شاشة التمهيد لعرض "قائمة تمهيد التشغيل لمرة واحدة". 5 باستخدام مفاتيح الأسهم ،حدد ( USB Storage Deviceجهاز تخزين )USBوانقر فوق ( Returnعودة). 6 سيتم تمهيد تشغيل النظام بالانتقال إلى موجه .Diag C <\: 7 قم بتشغيل الملف عن طريق كتابة اسم الملف الكامل ،على سبيل المثال O9010A12.exeوالضغط على "رجوع".
تنبيه :لا تقم بإيقاف تشغيل النظام أثناء عملية تحديث .BIOSإذ قد يؤدي إيقاف تشغيل النظام إلى فشل تمهيد النظام. 1 من حالة إيقاف التشغيل ،أدخل مفتاح USBحيث قمت بنسخ الفلاش إلى منفذ USBخاص بالنظام. 2 قم بتشغيل النظام واضغط على مفتاح F12للوصول إلى قائمة التمهيد لمرة واحدة وقم بتمييز تحديث فلاش BIOSباستخدام مفاتيح الأسهم ،ثم اضغط على .Enter 3 سيتم فتح قائمة فلاش ،BIOSثم انقر فوق زر استعراض. 4 ملف E5450A14.exeمعروض كمقال فى لقطة الشاشة التالية .
5 فور تحديد الملف ،سيظهر في مربع تحديد الملف ،ويمكنك النقر فوق زر ( OKموافق )للمتابعة. 6 انقر فوق زر ( Begin Flash Updateبدء تحديث الفلاش) .
7 يتم عرض مربع تحذيري يسألك عما إذا كنت تريد المتابعة أم لا .انقر فوق زر ( Yesنعم )لبدء تشغيل الفلاش. 8 وبناء على التغييرات المضمنة في في هذه المرحلة ،سيتم تشغيل فلاش BIOSوإعادة تمهيد النظام ،ثم يبدأ تشغيل فلاش BIOSويعرض شريط التقدم مراحل تشغيل الفلاش. ً التحديث ،ينتقل شريط التقدم من صفر إلى 100عدة مرات وقد يستغرق تقدم الفلاش مدة مقدارها 10دقائق .وبشكل عام ،فإن هذه العملية تستغرق من دقيقتين إلى ثلاث دقائق.
9 فور الانتهاء ،ستتم إعادة تمهيد النظام وتكتمل عملية تحديث .BIOS كلمة مرور النظام والضبط يمكنك إنشاء كلمة مرور النظام وكلمة مرور الضبط لتأمين الكمبيوتر. نوع كلمة المرور الوصف كلمة مرور النظام كلمة المرور التي يجب عليك إدخالها لتسجيل الدخول إلى النظام. كلمة مرور الضبط كلمة المرور التي يجب عليك إدخالها للوصول إلى ضبط BIOSوإحداث تغيير فيها والخاصة بالكمبيوتر. تنبيه :توفر ميزات كلمة المرور مستوى رئيسي من الأمان للبيانات الموجودة على الكمبيوتر.
5 اضغط على Yلحفظ التغييرات. يقوم الكمبيوتر بإعادة التمهيد. حذف أو تغيير كلمة مرور نظام و/أو إعداد موجود تأكد أن ( Password Statusحالة كلمة المرور) غير مؤمنة( في ضبط النظام )قبل محاولة حذف أو تغيير النظام الحالي و/أو كلمة مرور الإعداد .لا يمكنك حذف أو تغيير كلمة المرور الحالية للنظام أو الإعداد ،إذا كانت ( Password Statusحالة كلمة المرور) مقفلة. للدخول إلى إعداد النظام ،اضغط على F2بعد التشغيل أو إعادة التمهيد مباشرة.
6 البرامج يوضح هذا الفصل بالتفصيل أنظمة التشغيل المدعومة إلى جانب إرشادات حول كيفة تثبيت برامج التشغيل. الموضوعات: • عمليات تهيئة نظام التشغيل • تنزيل برامج التشغيل • برامج تشغيل مجموعة الشرائح • برنامج تشغيل وحدة التحكم في الرسومات • برامج تشغيل USB • برامج تشغيل الشبكة • برامج تشغيل الصوت • برامج تشغيل وحدة التحكم في التخزين • برامج تشغيل أخرى عمليات تهيئة نظام التشغيل يسرد هذا الموضوع نظام التشغيل المدعوم جدول .
برنامج تشغيل وحدة التحكم في الرسومات تحقق مما إذا كان برنامج تشغيل وحدة التحكم في الرسومات مثبت ًا بالفعل في جهاز الكمبيوتر.
برامج تشغيل USB تحقق مما إذا كانت برامج تشغيل USBمثبتة بالفعل في جهاز الكمبيوتر أم لا. برامج تشغيل الشبكة يحمل برنامج التشغيل اسم .Intel I219-LM Ethernet Driver برامج تشغيل الصوت تحقق مما إذا كانت برامج تشغيل الصوت مثبتة بالفعل في جهاز الكمبيوتر. برامج تشغيل وحدة التحكم في التخزين تحقق مما إذا كانت برامج وحدة التحكم في التخزين مثبتة بالفعل في جهاز الكمبيوتر. برامج تشغيل أخرى يعرض هذا القسم تفاصيل برامج التشغيل المختلفة لجميع المكونات الأخرى في "مدير الأجهزة".
برامج تشغيل أجهزة البرامج تحقق مما إذا كانت برامج تشغيل أجهزة البرامج مثبتة في جهاز الكمبيوتر. برامج تشغيل أجهزة الواجهة البشرية تحقق مما إذا كانت برامج تشغيل أجهزة الواجهة البشرية مثبتة في جهاز الكمبيوتر. البرامج الثابتة تحقق مما إذا كانت برامج تشغيل البرامج الثابتة مثبتة بالفعل في جهاز الكمبيوتر أم لا. Intel Dynamic Platform and Thermal Framework تحقق مما إذا كانت برامج تشغيل Intel Dynamic Platform and Thermal Frameworkمثبتة بالفعل في جهاز الكمبيوتر.
7 استشكاف الأخطاء وإصلاحها تشخيص التقييم المحسن للنظام قبل التمهيد ( )ePSAالإصدار 3.0من Dell يمكنك استدعاء تشخيصات ePSAعن طريق إجراء أى من الخطوات التالية: • الضغط على مفتاح F12عند تمهيد النظام وتحديد الخيار ( Diagnosticsتشخيصات). • الضغط على Fn+PWRعند تمهيد النظام. لمزيد من التفاصيل ،انظر تشخيص 3.0 EPSAمن .Dell تشغيل تشخيصات (ePSAتقييم النظام المحسن لما قبل التمهيد) 1 قم بتشغيل جهاز الكمبيوتر.
2 2 لوحة النظامBIOS ROM ، عطلاً في ROM لوحة النظام ،يشمل تلف BIOSأو ُ 2 3 الذاكرة لم يتم اكتشاف ذاكرة/ذاكرة الوصول العشوائي( )RAM 2 4 الذاكرة عطل في الذاكرة/ذاكرة الوصول العشوائي( )RAM 2 5 الذاكرة تم تثبيت ذاكرة غير صالحة 2 6 لوحة النظام؛ مجموعة الشرائح خطأ في لوحة النظام/مجموعة الشرائح 2 7 الشاشة عطل في الشاشة 3 1 عطل في تشغيل ساعة الوقت الحقيقي( )RTC عطل في البطارية الخلوية
8 الاتصال بشركة Dell ملاحظة :إذا لم يكن لديك اتصال نشط بالإنترنت ،فيمكنك العثور على معلومات الاتصال على فاتورة الشراء الخاصة بك أو إيصال الشحن أو الفاتورة أو كتيب منتج .Dell توفر Dellالعديد من خيارات الدعم والخدمة القائمة على الهاتف والإنترنت .يختلف التوفر حسب البلد والمنتج ،وقد لا تتوفر بعض الخدمات في منطقتك .للاتصال بشركة Dellللاستفسار عن مسائل تتعلق بالمبيعات أو الدعم الفني أو خدمة العملاء: 1 اذهب إلى .Dell.com/support 2 حدد فئة الدعم.