Dell Vostro 5471 Manuale del proprietario Modello normativo: P88G Tipo normativo: P88G001
Messaggi di N.B., Attenzione e Avvertenza N.B.: un messaggio N.B. (Nota Bene) indica informazioni importanti che contribuiscono a migliorare l'utilizzo del prodotto. ATTENZIONE: Un messaggio di ATTENZIONE indica un danno potenziale all'hardware o la perdita di dati, e spiega come evitare il problema. AVVERTENZA: Un messaggio di AVVERTENZA indica un rischio di danni materiali, lesioni personali o morte. © 2016 Dell Inc. o le sue affiliate. Tutti i diritti riservati.
Sommario 1 Interventi sui componenti del computer..........................................................................................................7 Istruzioni di sicurezza......................................................................................................................................................... 7 Spegnimento del computer - Windows 10......................................................................................................................
Touchpad...........................................................................................................................................................................27 Rimozione del touchpad............................................................................................................................................ 27 Installazione del touchpad.........................................................................................................................................
Funzionalità dell'interfaccia HDMI 1.4...................................................................................................................... 48 Vantaggi dell'interfaccia HDMI................................................................................................................................. 49 4 Specifiche del sistema................................................................................................................................. 50 Specifiche di sistema...........
Software......................................................................................................................................................76 Configurazioni del sistema operativo............................................................................................................................. 76 Download dei driver.........................................................................................................................................................
1 Interventi sui componenti del computer Argomenti: • Istruzioni di sicurezza • Spegnimento del computer - Windows 10 • Prima di intervenire sui componenti interni del computer • Dopo aver effettuato interventi sui componenti interni del computer Istruzioni di sicurezza Utilizzare le seguenti istruzioni di sicurezza per proteggere il computer da danni potenziali e per garantire la propria sicurezza personale.
Spegnimento del computer - Windows 10 ATTENZIONE: Per evitare la perdita di dati, salvare e chiudere i file aperti e uscire dai programmi in esecuzione prima di spegnere il computer . 1 Fare clic su o toccare l' 2 Fare clic su o toccare l' . , quindi fare clic su o toccare Arresta. N.B.: Assicurarsi che il computer e tutte le periferiche collegate siano spenti.
2 Rimozione e installazione dei componenti Coperchio della base Rimozione del coperchio della base 1 Seguire le procedure descritte in Prima di effettuare interventi sui componenti interni del computer. 2 Rimuovere il coperchio della base: a b Rimuovere le otto viti M2,5 x 6 [1]. Allentare le due viti M2,5 x 6 [2]. c Sollevare il coperchio della base per liberarla dal bordo [1]. d N.B.: Potrebbe essere necessario un graffietto in plastica per sollevare il coperchio della base dal bordo.
Installazione del coperchio della base 1 Allineare il coperchio della base con i fori delle viti sul computer. 2 Premere sui bordi del coperchio fino a quando non scatta in posizione. 3 Serrare le due viti M2.5 x 6. 4 Ricollocare le otto viti M2.5 x 6 per fissare il coperchio della base al computer. 5 Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
d e Rimuovere le quattro viti M2.0 x 3 [1]. Sollevare la batteria per allontanarla dal sistema [2].
Installazione della batteria 1 Inserire la batteria nello slot sul computer. 2 Collegare il cavo della batteria al connettore sulla scheda di sistema. 3 Collegare il cavo del disco rigido al connettore sulla scheda di sistema e serrare il dispositivo di chiusura. 4 Ricollocare le quattro viti M2,0 x 3 mm per fissare la batteria al sistema. 5 Installare il coperchio della base. 6 Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
Installazione dell'altoparlante 1 Allineare gli altoparlanti negli slot sul sistema. 2 Instradare il cavo degli altoparlanti attraverso le linguette delle guide di instradamento del sistema. 3 Collegare il cavo degli altoparlanti alla scheda di sistema. 4 Installare: a b 5 Batteria Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
4 Per rimuovere il disco rigido: a b 14 Rimuovere le quattro viti M2,0x3 che assicurano il disco rigido al sistema [1]. Sollevare il disco rigido per estrarlo dal sistema [2].
Installazione del disco rigido 1 Inserire il gruppo del disco rigido nello slot sul sistema. 2 Riposizionare le quattro viti M2.0 x 3 che fissano il disco rigido al sistema. 3 Apporre il cavo del disco rigido sulla batteria. 4 Collegare il cavo del disco rigido al connettore sulla scheda di sistema. 5 Installare: a b 6 Batteria Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
Installazione della batteria a bottone 1 Posizionare la batteria pulsante nell'alloggiamento sulla scheda di sistema. 2 Collegare il cavo della batteria a bottone al connettore sulla scheda di sistema. 3 Installare il coperchio della base. 4 Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer. Unità SSD (opzionale) Rimozione dell'unità a stato solido M.
Installazione dell'unità a stato solido (SSD) M.2 1 Allineare la tacca sull'unità a stato solido con la linguetta sullo slot dell'unità stessa. 2 Far scorrere l'unità SSD nello slot. 3 Ricollocare la vite M2.0 x 3 per fissare l'unità SSD al computer. 4 Installare il coperchio della base. 5 Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
Installazione della scheda WLAN 1 Inserire la scheda WLAN nello slot del sistema. 2 Collegare i cavi WLAN ai connettori sulla scheda WLAN. 3 Posizionare la staffa e ricollocare la vite M2.0 x 4 per fissarla al sistema. 4 Installare il coperchio della base. 5 Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
Installazione della ventola del sistema 1 Collocare la ventola nello slot sul sistema. 2 Ricollocare le due viti M2.0 x 4 per fissarlo al sistema. 3 Collegare il cavo della ventola di sistema al connettore sulla scheda di sistema. 4 Installare il coperchio della base. 5 Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
Installazione del dissipatore di calore 1 Posizionare il dissipatore di calore nello slot del sistema. 2 Serrare le sette viti M2.0 x 3 per fissare il dissipatore di calore alla scheda di sistema. 3 Installare: a b 4 ventola di sistema Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
d e Rimuovere le due viti M2.0 x 4 che fissano la scheda di I/O al sistema [1]. Estrarre la scheda di I/O dal sistema.
Installazione della scheda di Input/Output 1 Posizionare la scheda di Input/Output (I/O) nel relativo slot sul sistema. 2 Ricollocare le due viti M2.0 x 4 per fissare la scheda di I/O alla scheda di sistema. 3 Collegare il cavo di I/O e del lettore di impronte digitali e chiudere l'apposito dispositivo per fissarlo alla scheda di I/O.
3 Rimuovere l'Accensione: a b c Rimuovere le due viti M2.5x6 che fissano il cardine destro dello schermo al sistema [1]. Sollevare il cardine [2]. Sollevare il dispositivo di chiusura e scollegare il cavo del pulsante di alimentazione dal relativo connettore sulla scheda del lettore di impronte digitali. d e Rimuovere le due viti M2.0 x 3 che fissano il pulsante di alimentazione al sistema [1]. Estrarre il pulsante dal sistema [2].
Installazione dell'Accensione 1 Posizionare il pulsante di alimentazione nello slot del sistema. 2 Riposizionare le viti che fissano il pulsante di alimentazione al sistema. 3 Collegare il cavo di alimentazione al connettore sulla scheda del lettore di impronte digitali. 4 Chiudere il cardine dello schermo e fissarlo al sistema con le due viti M2.5 x 4.
c d e 3 ventola di sistema dissipatore di calore unità a stato solido (SSD) Rimuovere la scheda di sistema: a b c d Scollegare i cavi seguenti: • Cavo della scheda di Input/Output (I/O) [1, 2] • Cavo della scheda di Input/Output (I/O) [3] • Cavo per la retroilluminazione della tastiera [4] • Cavo di tastiera e touchpad [5] Scollegare dal connettore il cavo eDP [1], il cavo della porta dell'adattatore di alimentazione [2] e il cavo degli altoparlanti [5]. Rimuovere le due viti M2.
e f 26 Rimuovere le tre viti M2.0 x 2 che fissano la scheda di sistema al sistema stesso [1]. Sollevare e rimuovere la scheda di sistema dal sistema stesso [2].
Installazione della scheda di sistema 1 Allineare i fori delle viti sulla scheda di sistema con quelli sul sistema. 2 Ricollocare le tre viti M2.0 x 2 per fissare la scheda di sistema al computer. 3 Allineare i fori per le viti sulla staffa USB Type C a quelli sulla scheda di sistema, quindi riposizionare le due viti per fissare la staffa al sistema. 4 Collegare il cavo eDP, il cavo della porta dell'adattatore di alimentazione e il cavo dell'altoparlante al connettore sulla scheda di sistema.
c Rimuovere le tre viti M2.0 x 2 viti che fissano la staffa di supporto del touchpad al sistema e sollevare il touchpad per allontanarlo dal sistema [1, 2]. Installazione del touchpad 1 Ricollocare le tre viti per fissare la staffa di supporto del touchpad al sistema. 2 Collegare il cavo del touchpad al connettore nel sistema. 3 Ricollocare le quattro viti per fissare il touchpad al sistema.
c Sollevare e far scorrere il gruppo dello schermo. d Il componente che rimane è il gruppo dello schermo.
Installazione del gruppo dello schermo 1 Allineare e posizionare il gruppo dello schermo nel sistema. 2 Collocare la staffa del cardine sul sistema e ricollocare le viti per fissare il gruppo dello schermo al sistema. 3 Collegare il cavo eDP al connettore della scheda di sistema. 4 Installare: a b 5 Scheda WLAN Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
b Rimuovere la cornice dello schermo dal gruppo dello schermo.
Installazione del frontalino dello schermo 1 Posizionare la cornice dello schermo sul gruppo dello schermo. 2 Partendo dall'angolo superiore, premere la cornice dello schermo e procedere lungo tutto il perimetro finché la cornice non si incastra nel gruppo dello schermo. 3 Installare: a b c 4 gruppo schermo Scheda WLAN Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
Installazione della fotocamera 1 Allineare e posizionare il modulo della fotocamera nell'apposito slot sul gruppo dello schermo. 2 Collegare il cavo della fotocamera al connettore sul gruppo schermo. 3 Installare: a b c d 4 cornice dello schermo gruppo schermo Scheda WLAN Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
3 Rimuovere il pannello dello schermo: 34 a Rimuovere le quattro viti M2.0 x 2 che fissano il pannello dello schermo al gruppo dello schermo [1] e sollevare per capovolgere il pannello dello schermo per accedere al cavo eDP [2]. b c d Rimuovere il nastro adesivo [1]. Sollevare il dispositivo di chiusura e scollegare il cavo dello schermo dal relativo connettore [2]. Sollevare il pannello dello schermo [3]. e Il componente che rimane è il pannello dello schermo.
Installazione del pannello dello schermo 1 Collegare il cavo eDP al connettore. 2 Applicare il nastro adesivo per assicurare il cavo eDP. 3 Ricollocare il pannello dello schermo in modo da allinearlo ai fori delle viti sul gruppo dello schermo. 4 Ricollocare le quattro viti per assicurare il pannello dello schermo al relativo gruppo.
Installazione dei cardini dello schermo 1 Posizionare il coperchio dei cardini sul gruppo dello schermo. 2 Ricollocare le viti per fissare il coperchio dei cardini dello schermo al gruppo dello schermo. 3 Installare: a b c d e 4 schermo cornice dello schermo gruppo schermo Scheda WLAN Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
d Scollegare il cavo di ingresso CC dal sistema [4]. Installazione del jack di ingresso CC 1 Posizionare e collegare l'alimentazione CC nel relativo slot sul sistema. 2 Collegare il cavo della porta dell'alimentatore al connettore sulla scheda di sistema. 3 Posizionare il cardine destro dello schermo e ricollocare le tre viti per fissare il cardine al sistema.
c d e f g h i j k 3 ventola di sistema dissipatore di calore unità a stato solido (SSD) Scheda WLAN Scheda di I/O (Input/Output) pulsante di alimentazione Disco rigido scheda di sistema gruppo schermo Per rimuovere la tastiera: 38 a b Rimuovere le viti M1.2 x 2 (33) che fissano la tastiera al sistema [1]. Scollegare il cavo della tastiera dal connettore nel sistema [2]. c Estrarre la staffa della tastiera dal sistema.
d e Rimuovere le quattro viti che fissano la tastiera al poggiapolsi [1]. Estrarre la tastiera dal sistema [2]. Installazione della tastiera 1 Posizionare la tastiera nello slot del poggiapolsi. 2 Ricollocare le viti che fissano la tastiera al poggiapolsi. 3 Posizionare l'apposita staffa al di sopra della tastiera nello slot del sistema.
4 Ricollocare le viti per fissare la tastiera al sistema. 5 Installare: a b c d e f g h i j k 6 gruppo schermo scheda di sistema Disco rigido pulsante accensione Scheda di I/O (Input/Output) Scheda WLAN unità a stato solido (SSD) dissipatore di calore ventola di sistema Batteria Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
3 Installare i seguenti componenti sul nuovo poggiapolsi: a b c d e f g h i j k l m n 4 gruppo schermo tastiera scheda di sistema Disco rigido pulsante accensione Scheda di I/O (Input/Output) Scheda WLAN unità a stato solido (SSD) dissipatore di calore ventola di sistema touchpad altoparlante Batteria Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
g 3 cardine dello schermo Liberare il cavo eDP dal canale di instradamento per rimuoverlo dallo schermo. Installazione del cavo eDP 1 Collocare il cavo eDP sul pannello dello schermo. 2 Instradare il cavo eDP nel canale di instradamento. 3 Installare: a b c d e f g 4 cardine dello schermo schermo fotocamera cornice dello schermo gruppo schermo Scheda WLAN Coperchio della base Seguire le procedure descritte in Dopo aver effettuato gli interventi sui componenti interni del computer.
e f g h 3 fotocamera schermo cardine dello schermo Cavo eDP Il gruppo del coperchio posteriore dello schermo è il componente che rimane dopo aver rimosso tutti i componenti. Installazione del coperchio posteriore dello schermo 1 Il gruppo del coperchio posteriore dello schermo è il componente che rimane dopo aver rimosso tutti i componenti.
3 Tecnologia e componenti Questo capitolo descrive la tecnologia e i componenti disponibili nel sistema. Argomenti: • DDR4 • Funzionalità USB • USB Type-C • HDMI 1.4 DDR4 La memoria DDR4 (Double Data Rate di quarta generazione) succede alle tecnologie DDR2 e DDR3 con un processore più veloce e una capacità massima di 512 GB, rispetto ai 128 GB per DIMM della memoria DDR3.
Figura 2. Differenza di Spessore Bordo incurvato I moduli DDR4 hanno un bordo incurvato indicano che facilita l'inserimento e allevia la pressione sul PCB durante l'installazione della memoria. Figura 3. Bordo incurvato Errori di memoria Gli errori visualizzati sul sistema recano il codice ON-FLASH-FLASH o ON-FLASH-ON. Se tutti i moduli di memoria presentano errori, il display LCD non si accende.
maggiore. USB 3.0/USB 3.1 Gen 1 finalmente risponde alle richieste dei consumatori, con una velocità teoricamente superiore di 10 volte rispetto alla tecnologia precedente. In breve, le caratteristiche della tecnologia USB 3.
Applicazioni USB 3.0/USB 3.1 Gen 1 apre a un maggior numero di dispositivi per migliorare l'esperienza generale. Se in passato i video USB erano a malapena accettabili (quanto a valori di risoluzione massima, latenza e compressione video), ora è facile immaginare che, con una larghezza di banda 5-10 volte superiore, le soluzioni video USB dovrebbero funzionare molto meglio. Il DVI a collegamento singolo richiede circa 2 Gbps di throughput. Se 480 Mbps erano limitativi, 5 Gbps sono più che promettenti.
USB Power Delivery USB Type-C è anche strettamente correlato alla specifica USB PD. Attualmente, spesso smartphone, tablet e altri dispositivi mobili si ricaricano tramite una connessione USB. Una connessione USB 2.0 fornisce fino a 2,5 watt, che sono sufficienti solo per un telefono, ma solo questo. Un notebook potrebbe richiedere fino a 60 watt, ad esempio. Con la specifica USB Power Delivery, l'alimentazione sale a 100 watt. È bidirezionale, quindi un dispositivo può inviare o ricevere l'alimentazione.
Vantaggi dell'interfaccia HDMI • La qualità HDMI trasmette audio e video digitali non compressi per la massima nitidezza d'immagine. • L'HDMI fornisce la qualità e la funzionalità di un'interfaccia digitale a basso costo, supportando formati video non compressi in modo semplice e conveniente • L'HDMI audio supporta diversi formati audio, dall'audio stereo standard al surround multicanale.
4 Specifiche del sistema Specifiche di sistema Funzione Specifiche Tipo di processore Intel Kaby Lake U-Quad Core Serie di chip di sistema Integrato all'interno del processore Cache totale • 8 MB di cache - Intel Core i7 di ottava generazione • 6 MB di cache - Intel Core i5 di ottava generazione Memoria Funzione Specifiche Tipo DDR4 Velocità 2.133/2.
Funzione Specifiche • Prestazioni audio HD • Microfoni a matrice digitale Specifiche di comunicazione Funzione Specifiche Adattatore Ethernet Scheda di interfaccia di rete con comunicazione 10/100/1000 Mb/s Wireless Opzioni WLAN: • DW1820 2x2 ac 802.11ac+BT4.
Funzione Luminosità massima Specifiche • Schermo LCD FHD da 14" antiriflesso, retroilluminato a LED • Schermo LCD HD da 14" antiriflesso, retroilluminato a LED Angolo operativo da 0° (chiuso) a 135° Frequenza d'aggiornamento 60 Hz Orizzontale FHD (80/80/80/80) Verticale FHD (80/80/80/80) Tastiera Funzione Numero di tasti Layout Specifiche • Stati Uniti: 80 tasti • Regno Unito: 81 tasti • Giappone: 84 tasti • Brasile: 82 tasti QWERTY/AZERTY/Kanji Specifiche del touchpad Funzione Spec
Archiviazione: • 500 GB a 5.400 RPM • 1 TB a 5.400 RPM • SSD M.2 da 128 GB • SSD M.2 da 256 GB • SSD M.
Funzione Larghezza Profondità Peso Specifiche • 45 W: 40 mm (1,57") • 65 W: 46 mm (1,81") • 45 W: 94 mm (3,7") • 65 W: 108 mm (4,25") • 45 W: 170 g • 65 W: 265 g Intervallo di temperatura: Da 0 °C a 40 °C In funzione Da 0 °C a 40 °C (da 32 °F a 104 °F) A riposo Da -40 °C a 70 °C (da -40 °F a 158 °F) Specifiche fisiche Funzione Specifiche Peso 1,685 kg (3,71 libbre) Altezza (mm/pollici) • Anteriore: 16,1 mm (0,63") • Posteriore: 17,4 mm (0,68") Larghezza (mm/ pollici) 343 mm (1
Funzione Specifiche Archiviazione 105 G +/-5% con durata dell'impulso pari a 2 ms +/-10% (equivalente a 127 cm/s) Altitudine massima: In funzione da -15,2 a 3048 m (da -50 a -10.000 pd) Archiviazione da –15,2 a 10,668 m (da -50 a -35.
5 Installazione di sistema La configurazione del sistema consente di gestire l'hardware del notebook e specificare le opzioni a livello del BIOS.
Tasti Esplorazione Freccia GIÙ Consente di passare al campo successivo. Invio Permette di selezionare un valore nel campo prescelto (se applicabile) o di seguire il collegamento nel campo. BARRA SPAZIATRICE Espande o riduce una lista a scorrimento, se applicabile. Linguetta Porta all'area successiva. N.B.: Solo per browser con grafica normale. Esc Passa alla pagina precedente finché non viene visualizzata la schermata principale.
Opzione Descrizione • • • UEFI Boot Path Security Enable Legacy Option ROMs (Abilita le ROM opzione legacy) (impostazione predefinita) Enable Attempt Legacy Boot (Abilita tentativo di avvio legacy) Enable UEFI Network Stack (Abilita stack di rete UEFI) Questa opzione consente di stabilire se il sistema dovrà richiedere all'utente di immettere la password dell'amministratore all'avvio in un percorso UEFI.
Opzione Descrizione SMART Reporting Questo campo controlla se durante l'avvio del sistema siano riportati errori del disco rigido per le unità integrate. Questa tecnologia fa parte della specifica SMART (Self-Monitoring Analysis and Reporting Technology). Questa opzione è disabilitata per impostazione predefinita. • USB Configuration Enable SMART Reporting (Abilita creazione di report SMART) Consente di attivare o disattivare la configurazione delle porte USB interne/esterne.
Opzione Descrizione Miscellaneous devices Consente di abilitare o disabilitare i seguenti dispositivi: • • Fotocamera HardDrive Free Fall Protection Queste opzioni sono attive per impostazione predefinita. Opzioni della schermata video Tabella 4. Video Opzione Descrizione LCD Brightness Consente di impostare la luminosità dello schermo in base alla sorgente di alimentazione: a batteria (il valore predefinito è 50%) o con alimentazione c.a. (il valore predefinito è 100%). Security Tabella 5.
Opzione Descrizione • Confirm new password: (Confermare la nuova password) Fare clic su OK quando viene visualizzato il messaggio di conferma. N.B.: Al primo accesso, il campo "Enter the old password:" (Inserire la password precedente) è contrassegnato come "Not set" (Non impostata). Pertanto, la password deve essere impostata quando si accede per la prima volta, dopodiché sarà possibile modificarla o eliminarla. M.
Opzione Descrizione Le opzioni disponibili sono le seguenti: • • • • • • • • TPM ON (Impostazione predefinita) Clear (Cancella) Ignora PPI per i comandi abilitati Ignora PPI per i comandi disabilitati Ignora PPI per i comandi cancellati Attestation enable (Abilita attestazione) (Impostazione predefinita) Key storage enable (Abilita archivio principale) (Impostazione predefinita) SHA-256 (impostazione predefinita) Fare clic su una delle seguenti opzioni: • • Computrace (R) Enabled (Abilitato) (Impostazio
Opzione Descrizione • Expert Key Management Enabled (Attivato) Consente di abilitare o disabilitare la Modalità avanzata di gestione chiavi. • Enable Custom Mode (Abilità modalità personalizzata) Questa opzione non è impostata per impostazione predefinita. Le opzioni della Gestione chiavi modalità personalizzata sono: • • • • PK (Impostazione predefinita) KEK db dbx Opzioni di estensione della protezione del software Intel Tabella 7.
Opzione Descrizione • 3 Consente di abilitare o disabilitare la modalità Intel SpeedStep del processore. Intel SpeedStep • Enable Intel SpeedStep (Abilita Intel SpeedStep) Questa opzione è abilitata per impostazione predefinita. Consente di abilitare o disabilitare gli stati di sospensione aggiuntivi del processore. C-States Control • C states (Stati C) Questa opzione è abilitata per impostazione predefinita. Consente di abilitare o disabilitare la modalità Intel TurboBoost del processore.
Opzione Descrizione USB Wake Support Consente di abilitare la riattivazione del sistema dalla modalità Standby ad opera delle periferiche USB. • Enable USB Wake Support (Abilita supporto riattivazione USB) Questa opzione non è impostata per impostazione predefinita. Wake on LAN Questa opzione consente al computer di accendersi all'invio dello speciale segnale LAN. Questa impostazione non influisce sulla riattivazione dallo stato di standby, che deve essere attivata nel sistema operativo.
Opzione Descrizione • Fastboot Lock Mode Enable/Secondary (Modalità blocco abilitata/secondaria) (Impostazione predefinita) Consente di accelerare il processo di avvio ignorando alcune fasi di compatibilità. Fare clic su una delle seguenti opzioni: • • • Extended BIOS POST Time Minimal (Minimo) Thorough (Completo) (Impostazione predefinita) Auto (Automatico) Consente di creare un ulteriore ritardo di preavvio.
Opzioni wireless Tabella 12. Wireless Opzione Descrizione Wireless Switch Consente di impostare i dispositivi wireless controllabili dallo switch wireless. Le opzioni disponibili sono le seguenti: • • WLAN/WiGig Bluetooth Tutte le opzioni sono abilitate per impostazione predefinita. Consente di abilitare o disabilitare i dispositivi senza fili interni.
Opzione Descrizione N.B.: Il campo BIOS Recovery from Hard Drive (Ripristino del BIOS dal disco rigido) deve essere abilitato. BIOS Recovery from Hard Drive (Esegui sempre controllo di integrità): esegue il controllo dell'integrità a ogni avvio. Registri di sistema Tabella 14. Log di sistema Opzione Descrizione BIOS events Consente di visualizzare e cancellare gli eventi POST dell'installazione del sistema (BIOS).
4 Selezionare la categoria Products (Prodotti) dall'elenco. 5 Selezionare il modello del computer per visualizzare la pagina Product Support (Supporto del prodotto). 6 Fare clic su Get drivers (Ottieni driver) e quindi su Drivers and Downloads (Driver e download). N.B.: Scegliere la categoria appropriata per raggiungere la pagina del prodotto. Viene visualizzata la sezione Drivers and Downloads (Drivers and Downloads). 7 Fare clic su Find it myself (Ricerca in autonomia).
Figura 4. Schermata di aggiornamento del BIOS in DOS Aggiornamento del BIOS Dell in ambienti Linux e Ubuntu Se si desidera aggiornare il BIOS di sistema in un ambiente Linux come Ubuntu, consultare http://www.dell.com/support/article/us/en/19/ SLN171755/updating-the-dell-bios-in-linux-and-ubuntu-environments?lang=EN. Aggiornamento del BIOS dal menu di avvio provvisorio F12 Aggiornare il BIOS di sistema utilizzando il file .
ATTENZIONE: Non spegnere il sistema durante il processo di aggiornamento del BIOS. Lo spegnimento del sistema potrebbe impedire di avviarlo. 1 A sistema spento, inserire in una porta USB la chiavetta in cui sono stati copiati i file dell'aggiornamento Flash. 2 Accendere il sistema e premere il tasto F12 per accedere al menu di avvio provvisorio, evidenziare BIOS Flash Update utilizzando i tasti freccia, quindi premere Invio. 3 Nel menu di aggiornamento Flash del BIOS fare clic su Browse.
5 Una volta selezionato il file, verrà visualizzato nella finestra di selezione dei file. Scegliere OK per continuare. 6 Fare clic su Begin Flash Update.
7 Viene visualizzata una finestra di avviso che chiede se si desidera procedere. Fare clic sul pulsante Yes per avviare l'aggiornamento Flash. 8 A questo punto l'aggiornamento Flash del BIOS viene eseguito. Il sistema viene riavviato e l'aggiornamento Flash del BIOS inizia, con una barra di avanzamento che ne indica lo stato.
9 Al termine il sistema verrà riavviato e il processo di aggiornamento del BIOS sarà completo. Password di sistema e password di installazione È possibile creare una password del sistema e una password della configurazione per proteggere il computer. Tipo di password Descrizione Password del sistema La password da inserire per accedere al sistema. Password della configurazione La password da inserire per accedere ed effettuare modifiche alle impostazioni del BIOS del computer.
• La password può contenere numeri tra 0 e 9. • Sono consentite solo lettere minuscole, lettere maiuscole non sono consentite. 3 • Sono consentiti solo i seguenti caratteri speciali: spazio, (”), (+), (,), (-), (.), (/), (;), ([), (\), (]), (`). Digitare la password di sistema inserita in precedenza nel campo Confirm new password (Conferma nuova password) e fare clic su OK. 4 Premere Esc e un messaggio richiede di salvare le modifiche. 5 Premere Y per salvare le modifiche. Il computer si riavvia.
6 Software Il presente capitolo descrive i sistemi operativi supportati e fornisce istruzioni su come installare i driver. Argomenti: • • • • • • • • • Configurazioni del sistema operativo Download dei driver Driver del chipset Driver del controller grafico Driver USB Driver di rete Driver audio Driver del controller di storage Altri driver Configurazioni del sistema operativo Questo argomento elenca i sistemi operativi supportati da Tabella 16.
Driver del controller grafico Accertarsi che il driver del controller grafico sia già installato sul sistema.
Driver USB Accertarsi che i driver USB siano già installati sul computer. Driver di rete Il driver è denominato Intel I219-LM Ethernet Driver. Driver audio Accertarsi che i driver audio siano già installati sul computer. Driver del controller di storage Accertarsi che i driver del controller di storage siano già installati sul computer. Altri driver Questa sezione elenca i dettagli dei driver di tutti gli altri componenti di Gestione dispositivi.
Driver dei dispositivi software Accertarsi che i driver del software siano già installati nel computer. Driver per Human Interface Device Accertarsi che i driver Human Interface Device siano già installati nel computer. Firmware Accertarsi che i driver del firmware siano già installati sul computer. DPTF (Piattaforma dinamica e struttura termica) Intel Controllare che nel computer siano già installati i driver Intel Dynamic Platform and Thermal Framework.
7 Risoluzione dei problemi Diagnostica 3.0 Dell per la valutazione avanzata del sistema di pre-avvio (ePSA) Per invocare la diagnostica ePSA, eseguire una delle seguenti operazioni: • Premere il tasto F12 durante l'avvio del sistema e selezionare l'opzione Diagnostics (Diagnostica). • Premere Fn+PWR all'avvio del sistema. Per ulteriori informazioni, consultare Diagnostica 3.0 ePSA di Dell. Esecuzione diagnostica ePSA 1 Accendere il computer.
Tabella 17.
8 Come contattare Dell N.B.: Se non si dispone di una connessione Internet attiva, è possibile trovare i recapiti sulla fattura di acquisto, sulla distinta di imballaggio, sulla fattura o sul catalogo dei prodotti Dell. Dell offre diverse opzioni di servizio e assistenza telefonica e online. La disponibilità varia per paese e prodotto, e alcuni servizi potrebbero non essere disponibili nella vostra zona.