Dell Vostro 5590 Onderhoudshandleiding Regelgevingsmodel: P88F Regelgevingstype: P88F001
Opmerkingen, voorzorgsmaatregelen,en waarschuwingen OPMERKING: Een OPMERKING duidt belangrijke informatie aan voor een beter gebruik van het product. WAARSCHUWING: WAARSCHUWINGEN duiden potentiële schade aan hardware of potentieel gegevensverlies aan en vertellen u hoe het probleem kan worden vermeden. GEVAAR: LET OP duidt het risico van schade aan eigendommen, lichamelijk letsel of overlijden aan. © 2019 Dell Inc. of zijn dochtermaatschappijen. Alle rechten voorbehouden.
Inhoudsopgave 1 Aan de computer werken............................................................................................................... 6 Veiligheidsinstructies............................................................................................................................................................. 6 Uw computer uitschakelen: Windows 10............................................................................................................................
De warmteafleidereenheid plaatsen (afzonderlijk).................................................................................................... 35 Warmteafleider (UMA)....................................................................................................................................................... 36 De warmteafleidereenheid verwijderen (UMA).........................................................................................................
Systeem- en installatiewachtwoord.................................................................................................................................. 76 Een wachtwoord voor de systeeminstallatie toewijzen............................................................................................76 Een bestaand systeeminstallatiewachtwoord verwijderen of wijzigen................................................................... 76 4 Problemen oplossen...........................................
1 Aan de computer werken Veiligheidsinstructies Vereisten Volg de onderstaande veiligheidsrichtlijnen om uw persoonlijke veiligheid te garanderen en de computer te beschermen tegen mogelijke schade. Tenzij anders aangegeven, wordt er bij elke procedure in dit document van de volgende veronderstellingen uitgegaan: • • U hebt de veiligheidsinformatie geraadpleegd die bij uw computer is geleverd.
Stappen 1. Klik of tik op het 2. Klik of tik op het . en klik of tik vervolgens opAfsluiten. OPMERKING: Zorg ervoor dat de computer en alle aangesloten apparaten zijn uitgeschakeld. Houd de aan-uitknop 6 seconden ingedrukt, indien uw computer en aangesloten apparaten niet automatisch worden uitgeschakeld wanneer u het besturingssysteem afsluit.
2 Onderdelen verwijderen en plaatsen Aanbevolen hulpmiddelen Voor de procedures in dit document heeft u het volgende gereedschap nodig: • • • Kruiskopschroevendraaier #0 Kruiskopschroevendraaier #1 Plastic pennetje OPMERKING: De #0 schroevendraaier is voor schroeven 0-1 en de #1 schroevendraaier is voor schroeven 2-4 Lijst van schroeven De volgende tabel bevat de lijst met schroeven en de afbeeldingen voor verschillende componenten. Tabel 1.
Onderdeel Type schroef Aantal Touchpadknopbeugel M2x2 (Grote schroefkop) 3 Touchpadkaart M2x2 (Grote schroefkop) 4 Scharnierplaat M2.5x5 4 M2x4 2 Warmteafleider - UMA M2x3 4 Warmteafleider - afzonderlijk M2x3 7 Moederbord M2x2 (Grote schroefkop) 5 Vingerafdrukkaart M2x2 (Grote schroefkop) 2 Aan-uitknopkaart M2x2 (Grote schroefkop) 2 Beeldschermscharnieren M2.5x2.5 (Grote schroefkop) 4 M2x3 2 Installatiekopie Onderplaat De onderplaat verwijderen Vereisten 1.
Onderdelen verwijderen en plaatsen
Stappen 1. Verwijder de zeven schroeven (M2.5x5) en draai de twee borgschroeven (M2x8) los waarmee de onderplaat aan de computer is bevestigd. 2. Wrik de onderplaat los, beginnend vanaf het rechterscharnier en vervolgens rondom. 3. Til de onderplaat van de computer omhoog. De onderplaat plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren.
Onderdelen verwijderen en plaatsen
Stappen 1. Plaats de onderplaat op de palmsteun- en toetsenbordeenheid en klik de onderplaat vast op zijn plaats. 2. Plaats de zeven schroeven (M2.5x5) terug en draai de twee borgschroeven (M2x8) vast om de onderplaat aan de computer te bevestigen. Vervolgstappen 1. Volg de procedure in Nadat u in de computer hebt gewerkt. Batterij Voorzorgsmaatregelen voor de lithium-ionbatterij WAARSCHUWING: • Wees voorzichtig bij het hanteren van lithium-ionbatterijen.
• Gebruik geen gereedschap om te wrikken op of langs de batterij. • Zorg dat er tijdens het onderhoud van dit product geen schroeven zoekraken of verloren gaan om te voorkomen dat de batterij en andere systeemonderdelen per ongeluk worden doorboord of schade oplopen. • Als een batterij vast komt te zitten in een apparaat als gevolg van zwellen, moet u niet proberen deze los te maken omdat het doorboren, buigen of pletten van een lithium-ionbatterij gevaarlijk kan zijn.
De batterij plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren. Over deze taak De afbeelding geeft de locatie van de batterij aan en biedt een visuele weergave van de plaatsingsprocedure. Stappen 1. Plaats de batterij op de palmsteun en lijn de schroefgaten op de batterij uit met de schroefgaten op de palmsteun. 2. Plaats de vier (M2x3) schroeven terug om de batterij aan de palmsteun te bevestigen. 3.
1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij. Over deze taak De afbeelding geeft de locatie van de geheugenmodule aan en biedt een visuele weergave van de verwijderingsprocedure. Stappen 1. Verwijder de tape boven de geheugenmodule, tot een hoek van 90 graden. 2. Duw de bevestigingsklemmen met uw vinger weg van de geheugenmodule totdat de geheugenmodule omhoogkomt. 3.
Stappen 1. Lijn de inkeping in de geheugenmodule uit met het lipje op de sleuf van de geheugenmodule. 2. Schuif stevig de geheugenmodule schuin in het slot. 3. Druk de geheugenmodule naar beneden totdat deze vastklikt. OPMERKING: Als u geen klik hoort, verwijdert u de geheugenmodule en plaatst u deze nogmaals. 4. Bevestig de tape boven de geheugenmodule. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt.
Stappen 1. Maak de vergrendeling los en koppel de kabel van de harde schijf los van de connector op het moederbord. 2. Verwijder de vier schroeven (M2x3) waarmee de harde schijfmodule aan de palmsteuneenheid is bevestigd. 3. Schuif de harde schijfmodule uit de computer. De harde schijf plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren.
Stappen 1. Plaats de harde schijfmodule op het systeem en lijn de schroefgaten in de harde schijfmodule uit met de schroefgaten in de palmsteuneenheid. 2. Plaats de vier schroeven (M2x3) terug om de harde schijfmodule aan de palmsteuneenheid te bevestigen. 3. Sluit de kabel van de harde schijf aan op de connector op het moederbord en sluit de vergrendeling om de kabel te vergrendelen. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt.
Stappen 1. Verwijder de enkele schroef (M2x3) waarmee de Solid State-module op de palmsteuneenheid bevestigd is. 2. Schuif de Solid State-module uit de M.2-sleuf. De M.2 2242 Solid State-schijf verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij. Over deze taak De afbeelding geeft de locatie van de M.2 2242 Solid State-schijf aan en biedt een visuele weergave van de verwijderingsprocedure.
Stappen 1. Verwijder de enkele schroef (M2x3) waarmee de Solid State-module op de palmsteuneenheid bevestigd is. 2. Schuif de Solid State-module uit de M.2-sleuf. De M.2 2280 Solid State-schijf verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij. Over deze taak De afbeelding geeft de locatie van de M.2 2280 Solid State-schijf aan en biedt een visuele weergave van de verwijderingsprocedure. Stappen 1.
Stappen 1. Schuif en verwijder de SSD-steunbeugel uit de sleuf van de steunbeugel. 2. Afhankelijk van het type Solid State-schijf (M.2 2230/ M.2 2242/ M.2 2280), moet u de steunbeugel van de SSD uitlijnen en in de sleuf voor de steunbeugel plaatsen. 3. Plaats de Solid State-schijf. De M.2 2230 Solid State-schijf plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren.
Stappen 1. Lijn de Solid State-schijf uit en schuif deze in de sleuf. 2. Plaats de enkele (M2x3) schroef terug om de Solid State-schijfmodule aan de palmsteun- en toetsenbordeenheid te bevestigen. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt. De M.2 2242 Solid State-schijf plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren.
Stappen 1. Lijn de Solid State-schijf uit en schuif deze in de M.2-sleuf. 2. Plaats de enkele (M2x3) schroef terug om de Solid State-schijfmodule aan de palmsteuneenheid te bevestigen. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt. De M.2 2280 Solid State-schijf plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren.
Stappen 1. Lijn de Solid State-schijf uit en schuif deze in de M.2-sleuf. 2. Plaats de enkele (M2x3) schroef terug om de Solid State-schijfmodule aan de palmsteuneenheid te bevestigen. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt. WLAN-kaart De WLAN-kaart verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij.
Stappen 1. Verwijder de enkele schroef (M2x3) waarmee de WLAN-beugel aan de computer is bevestigd. 2. Verwijder de WLAN-beugel. 3. Koppel de WLAN-antennekabels los van de WLAN-module. 4. Verwijder de WLAN-kaart door deze uit de sleuf van de WLAN-kaart te schuiven. De WLAN-kaart plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren.
De WLAN-kaart plaatsen Stappen 1. Lijn de inkeping op de WLAN-kaart uit met het lipje op de sleuf voor de WLAN-kaart en plaats de WLAN-kaart onder een hoek in de sleuf. 2. Sluit de WLAN-antennekabels aan op de WLAN-kaart. 3. Lijn de beugel van de WLAN-kaart uit en plaats deze om de WLAN-kaart aan het moederbord te bevestigen. 4. Draai de enkele schroef (M2x3) vast om de WLAN-kaart te bevestigen aan het moederbord. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3.
Over deze taak De afbeelding geeft de locatie van de knoopcelbatterij aan en biedt een visuele weergave van de verwijderingsprocedure. Stappen 1. Koppel de kabel van de knoopbatterij los van het moederbord. 2. Verwijder de kabel van de knoopbatterij uit de geleider. 3. Werk de knoopcelbatterij los van de palmsteuneenheid. De knoopcelbatterij plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren.
Stappen 1. Bevestig de knoopcelbatterij aan de sleuf van de palmsteuneenheid. 2. Leid de kabel van de knoopcelbatterij door de kabelgeleider. 3. Sluit de kabel van de knoopbatterij aan op het moederbord. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt. Luidsprekers De luidsprekers verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij.
Stappen 1. Zoek de luidsprekers in uw computer. 2. Koppel de luidsprekerkabel los van de connector op het moederbord. 3. Verwijder de tape waarmee de luidsprekerkabel is bevestigd. 4. Verwijder de luidsprekerkabels uit de bevestigingsklemmen op de computer. 5. Til de luidsprekers uit de computer. De luidsprekers plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren.
Stappen 1. De sleuf van de luidspreker in uw computer zoeken. 2. Lijn de luidsprekers uit en plaats deze in de sleuf op uw computer. 3. Sluit de stekker van de luidsprekerkabel aan op de connector op het moederbord. 4. Leid de luidsprekerkabels door de bevestigingsklemmen op uw computer. 5. Bevestig de tape om de luidsprekerkabel te bevestigen. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt.
Invoer- en uitvoerkaart De invoer- en uitvoerkaart verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij. Over deze taak De afbeelding geeft de locatie van de invoer- en uitvoerkaart van de smartcardlezer weer en biedt een visuele weergave van de verwijderingsprocedure. Stappen 1. Vind de invoer- en uitvoerkaart op uw computer. 2.
4. Verwijder de twee schroeven (M2x3) waarmee de invoer- en uitvoerkaart aan de palmsteuneenheid is bevestigd. 5. Til de invoer- en uitvoerkaart uit de computer. De invoer- en uitvoerkaart plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren. Over deze taak De afbeelding geeft de locatie van de invoer- en uitvoerkaart aan en biedt een visuele weergave van de plaatsingsprocedure. Stappen 1.
Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt. Warmteafleider (afzonderlijk) De warmteafleidereenheid verwijderen (afzonderlijk) Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij. Over deze taak De afbeelding geeft de locatie van de warmteafleidereenheid aan en biedt een visuele weergave van de verwijderingsprocedure.
Stappen 1. Zoek de warmteafleidereenheid op uw computer. 2. Verwijder de zeven schroeven (M2x3) waarmee de warmteafleider aan het moederbord is bevestigd. OPMERKING: Verwijder de schroeven in de volgorde van de nummers [1, 2, 3, 4, 5, 6, 7], zoals aangegeven op de warmteafleider. 3. Til de warmteafleidereenheid uit de computer.
3. Plaats de zeven schroeven (M2x3) terug om de warmteafleider aan het moederbord te bevestigen. OPMERKING: Plaats de schroeven terug volgens de nummers op de warmteafleider. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt. Warmteafleider (UMA) De warmteafleidereenheid verwijderen (UMA) Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij.
Stappen 1. Zoek de warmteafleidereenheid op uw computer. 2. Verwijder de vier schroeven (M2x3) waarmee de warmteafleidereenheid aan de computer is bevestigd. OPMERKING: Verwijder de schroeven volgens de nummers op de warmteafleidermodule. 3. Til de warmteafleidereenheid uit de computer. De warmteafleidereenheid plaatsen (UMA) Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren.
Stappen 1. Zoek de sleuf van de warmteafleidereenheid op uw computer. 2. Lijn de warmteafleidereenheid uit en plaats deze in de sleuf van de computer. 3. Plaats de vier schroeven (M2x3) terug waarmee de warmteafleider aan de systeemkaart wordt bevestigd. OPMERKING: Plaats de schroeven volgens de nummers op de warmteafleider. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt.
Systeemventilator De systeemventilator verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij. Over deze taak De afbeelding geeft de locatie van de systeemventilator aan en biedt een visuele weergave van de verwijderingsprocedure. Stappen 1. Open de vergrendeling en koppel de kabel van de invoer- en uitvoerkaart los van de connector op het moederbord. 2.
5. Til de systeemventilator uit de palmsteuneenheid. De systeemventilator plaatsen Vereisten Als u een onderdeel vervangt, dient u het bestaande onderdeel te verwijderen alvorens de installatieprocedure uit te voeren. Over deze taak De afbeelding geeft de locatie van de systeemventilator aan en biedt een visuele weergave van de plaatsingsprocedure. Stappen 1. Zoek de sleuf van de systeemventilator in uw computer. 2. Lijn de systeemventilator uit en plaats deze in de sleuf op de palmsteuneenheid. 3.
Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3. Volg de procedure in Nadat u in de computer hebt gewerkt. Toetsenblok De touchpad verwijderen Vereisten 1. Volg de procedure in Voordat u in de computer gaat werken. 2. Verwijder de onderplaat. 3. Verwijder de batterij. Over deze taak De afbeelding geeft de locatie van de touchpad aan en biedt een visuele weergave van de verwijderingsprocedure.
Stappen 1. Vind het touchpad in uw computer. 2. Verwijder de tape waarmee de luidsprekerkabel aan de touchpadbeugel is bevestigd. 3. Verwijder de drie schroeven (M2x2) waarmee de touchpadbeugel aan het touchpad is bevestigd. 4. Verwijder de touchpadbeugel uit de computer. 5. Til de vergrendeling op en koppel de touchpadkabel los uit de connector op het moederbord. 6. Verwijder de tape waarmee de touchpad aan de palmsteun- en toetsenbordeenheid is bevestigd. 7.
Stappen 1. De sleuf van de touchpad in uw computer zoeken. 2. Lijn het touchpad uit en plaats het in de sleuf op uw computer. 3. Plaats de vier schroeven (M2x2) terug om het touchpad aan de palmsteun te bevestigen. 4. Sluit de touchpadkabel aan op de connector op het moederbord en sluit de vergrendeling. 5. Bevestig de tape om het touchpad aan de palmsteun te bevestigen. 6. Lijn de touchpadbeugel uit en plaats dit. 7. Plaats de drie (M2x2) schroeven terug om de touchpadbeugel aan het touchpad te bevestigen.
Stappen 1. Zoek de voedingsadapterpoort op uw computer. 2. Verwijder de drie (M2.5x5) schroeven waarmee het linker beeldschermscharnier aan de palmsteuneenheid is bevestigd. 3. Til het linkerscharnier gedeeltelijk omhoog. 4. Koppel de netadapterkabel los van de connector op het moederbord. 5. Verwijder de enkele schroef (M2x5) waarmee de voedingsadapterpoort aan de palmsteun vastzit. 6. Til de beugel van de netadapterpoort uit de computer.
Stappen 1. Vind de sleuf van de voedingsadapter op uw computer. 2. Plaats de netstroomadapterpoort in de sleuf op het moederbord. 3. Plaats de enkele schroef (M2x5) terug om de voedingsadapterpoort aan de palmsteuneenheid te bevestigen. 4. Sluit de netadapterkabel aan op de connector op het moederbord. 5. Sluit het linkerscharnier. 6. Plaats de drie schroeven (M2.5x5) terug waarmee het linkerscharnier aan het moederbord wordt bevestigd. Vervolgstappen 1. Plaats de batterij. 2. Plaats de onderplaat. 3.
3. 4. 5. 6. 7. 8. Verwijder de batterij. Verwijder de M.2 2230 SSD of M.2 2242 SSD of M.2 2280 SSD. Verwijder het geheugen. Verwijder de WLAN. Verwijder de warmteafleider (afzonderlijk) of warmteafleider (UMA). Verwijder de netstroomadapterpoort. Over deze taak De afbeelding geeft de locatie van het moederbord aan en biedt een visuele weergave van de verwijderingsprocedure.
Stappen 1. Zoek de systeemkaart in uw computer. 2. Til de vergrendeling op en koppel de kabel van de ingangs-/uitgangskaart los uit de connector op de systeemkaart. 3. Til de vergrendeling op en koppel de voedingskabel los uit de connector op de systeemkaart. 4. Trek de tape los boven de beeldschermkabelconnector. 5. Til de vergrendeling op en koppel de beeldschermkabel los uit de connector op het moederbord. 6. Verwijder de WLAN-antennekabels. 7.
Onderdelen verwijderen en plaatsen
Stappen 1. Zoek de sleuf van de systeemkaart in uw computer. 2. Lijn de schroefgaten op de systeemkaart uit met de schroefgaten in de palmsteunenheid. 3. Plaats de vijf (M2x4) en twee (M2x5) schroeven terug waarmee de systeemkaart aan de palmsteun- en toetsenbordeenheid wordt bevestigd. 4. Sluit de kabel van de ingangs-/uitgangskaart aan op de connector op de systeemkaart en bevestig de vergrendeling. 5. Sluit de voedingskabel aan op de connector op de systeemkaart en sluit de vergrendeling. 6.
6. Plaats de batterij. 7. Plaats de onderplaat. 8. Volg de procedure in Nadat u in de computer hebt gewerkt. Aan-/uitknop De aan-uitknop verwijderen Vereisten 1. 2. 3. 4. 5. Volg de procedure in Voordat u in de computer gaat werken. Verwijder de onderplaat. Verwijder de batterij. Verwijder de systeemventilator. De invoer- en uitvoerkaart verwijderen. Over deze taak De afbeelding geeft de locatie van de aan-/uitknop weer en biedt een visuele weergave van de verwijderingsprocedure.
Stappen 1. Zoek de aan-/uitknop op uw computer. 2. Verwijder de drie (M2.5x5) schroeven waarmee het rechter beeldschermscharnier aan de palmsteuneenheid is bevestigd. 3. Til het rechter beeldschermscharnier op. 4. Til de vergrendeling op en koppel de kabel van de aan-/uitknop los uit de connector op het moederbord. 5. Verwijder de tape boven de aan-/uitknop. 6. Verwijder de twee (M2x2) en de twee (M2x3) schroeven waarmee de aan-/uitknop aan de palmsteuneenheid is bevestigd. 7.
Stappen 1. Zoek de sleuf van de aan-/uitknop op uw computer. 2. Lijn de aan-/uitknop uit en plaats deze in de sleuf op uw computer. 3. Plaats de twee (M2x2) en de twee (M2x3) schroeven terug om de aan-/uitknopkaart aan de palmsteuneenheid te bevestigen. 4. Plaats de tape boven de aan-/uitknop. 5. Sluit de kabel van de aan-/uitknop aan op de connector op het moederbord en sluit de vergrendeling. 6. Sluit het rechter beeldschermscharnier en plaats de drie (M2.
Stappen 1. Zoek de aan/uit-knop met vingerafdruklezer op uw computer. 2. Verwijder de drie (M2.5x5) schroeven waarmee het rechter beeldschermscharnier aan de palmsteuneenheid is bevestigd. 3. Til het rechter beeldschermscharnier op. 4. Til de vergrendeling op en koppel de kabel van de aan-/uitknop los uit de connector op het moederbord. 5. Koppel de kabel van de vingerafdruklezer los van de connector op de kabel van de aan-/uitknop. 6.
Stappen 1. Zoek de sleuf van de aan/uit-knop met vingerafdruk op uw computer. 2. Lijn de aan/uit-knop met vingerafdruk uit en plaats deze in de sleuf op uw computer. 3. Plaats de twee schroeven (M2x3) terug om de aan-/uitknop met vingerafdruk aan de palmsteuneenheid te bevestigen. 4. Plaats de twee schroeven (M2x2) terug om de aan-/uitknopkaartbeugel aan de palmsteuneenheid te bevestigen. 5. Sluit de kabel van de vingerafdruklezer aan op de connector van de aan-/uitknopkabel. 6.
Beeldschermassemblage De beeldschermeenheid verwijderen Vereisten 1. 2. 3. 4. Volg de procedure in Voordat u in de computer gaat werken. Verwijder de onderplaat. Verwijder de batterij. Verwijder de systeemventilator. Over deze taak De afbeelding geeft de locatie van de beeldschermeenheid aan en biedt een visuele weergave van de verwijderingsprocedure.
Onderdelen verwijderen en plaatsen
Onderdelen verwijderen en plaatsen 57
Stappen 1. Verwijder de tape waarmee de connector van de beeldschermkabel aan het moederbord is bevestigd. 2. Open de vergrendeling en koppel de beeldschermkabel los van het moederbord. 3. Verwijder de vier (M2.5x2.5 (Grote schroefkop)) schroeven en twee (M2x3) schroeven om de linker en rechter beeldschermscharnieren aan het chassis van de computer te bevestigen. 4. Open de beeldschermscharnieren onder een hoek van 90 graden. 5. Schuif en til de palmsteuneenheid voorzichtig weg van de beeldschermeenheid.
Onderdelen verwijderen en plaatsen 59
Onderdelen verwijderen en plaatsen
Stappen 1. Plaats de beeldschermassemblage op een schoon en vlak oppervlak. 2. Lijn de palmsteun- en toetsenbordeenheid uit en plaats deze op de beeldschermeenheid. 3. Gebruik de uitlijningspunten om de linker en rechter beeldschermscharnieren te sluiten. 4. Plaats de vier (M2.5x2.5 (Grote schroefkop)) schroeven en twee (M2x3) schroeven om de linker en rechter beeldschermscharnieren aan het chassis van de computer te bevestigen. 5.
6. 7. 8. 9. 10. 11. 12. 13. 14. Verwijder de luidsprekers Verwijder de M.2 2230 SSD of M.2 2242 SSD of M.2 2280 SSD. Verwijder het geheugen. Verwijder de WLAN. Verwijder de invoer- en uitvoerkaart. Verwijder de systeemventilator. Verwijder de netstroomadapterpoort. Verwijder de touchpad. Verwijder het moederbord. OPMERKING: Het moederbord kan worden verwijderd en tegelijk met de warmteafleider worden geïnstalleerd, bij het terugplaatsen van de polssteungedeelte.
16. Volg de procedure in Nadat u in de computer hebt gewerkt.
3 Systeeminstallatie WAARSCHUWING: Tenzij u een computerexpert bent, dient u de instellingen voor dit programma niet te wijzigen. Door bepaalde wijzigingen is het mogelijk dat de computer niet goed meer werkt. OPMERKING: Voordat u het BIOS-setup-programma gebruikt, is het verstandig de scherminformatie van het BIOSsetup-programma te noteren zodat u deze later ter referentie kunt gebruiken.
Toetsen Navigatie Spatiebalk Vergroot of verkleint een vervolgkeuzelijst, mits van toepassing. Tabblad Gaat naar het focusveld. Esc Gaat naar de vorige pagina totdat het hoofdscherm wordt weergegeven. Als u in het hoofdscherm op Esc drukt, wordt een bericht weergegeven met de vraag om de niet-opgeslagen wijzigingen op te slaan en wordt het systeem opnieuw opgestart.
Optie Beschrijving Apparaten Toont het paneeltype, de videocontroller, het videogeheugen, het wifi-apparaat, de systeemeigen resolutie, de video-BIOS-versie, de audiocontroller, het Bluetooth-apparaat, het LOM MAC-adres en de dGPU-videocontroller. . Opties voor opstarten Tabel 3.
Optie Beschrijving SATA Operation Hiermee kunt u de bewerkingsmodus van de geïntegreerde SATA harde schijfcontroller instellen. • • • Schijfinformatie Disabled AHCI RAID On (RAID aan) (standaard ingeschakeld) De volgende informatie over het moederbord wordt weergegeven: • SATA-0 • • Type • Apparaat M.
Optie Beschrijving Keyboard Backlight Timeout on Battery Deze functie bepaalt de waarde van de time-out voor de toetsenbordverlichting als het systeem alleen op batterij wordt uitgevoerd. • • • • • • • • 5 sec 10 sec - standaard ingeschakeld 15 sec 30 sec 1 min 5 min 15 min Never (nooit) Video Hiermee kunt u de helderheid van het beeldscherm instellen afhankelijk van de voeding (On Battery (op batterij) en On AC (op netvoeding)). De LCD-helderheid is onafhankelijk voor de accu en voedingsadapter.
Optie Beschrijving Password Bypass Met deze optie kunt u tijdens het opnieuw opstarten van het systeem het System (Boot) Password en het wachtwoord van de interne vaste schijf omzeilen. • • Disabled (Uitgeschakeld): vraag altijd om het wachtwoord van het systeem en de interne HDD wanneer deze zijn ingesteld. Deze optie is standaard ingeschakeld. Reboot Bypass (Overslaan bij hervatten): sla de wachtwoordprompts over bij opnieuw opstarten (warm opstarten).
Optie Beschrijving SPassword-configuratie • • • • Admin Password Met dit veld kunt u het (beheerders) wachtwoord instellen, wijzigen, of verwijderen. Het adminwachtwoord zorgt voor enkele beveiligingsfuncties. System Password Dit veld stelt u in staat om het systeemwachtwoord in te stellen. Enable Master Password Lockout (Blokkeren masterwachtwoord inschakelen) Met dit veld schakelt u ondersteuning voor het masterwachtwoord uit.
Prestaties Tabel 9. Prestaties Optie Beschrijving Multi Core Support Met dit veld kunt u het aantal CPU-kernen wijzigen dat beschikbaar is voor het besturingssysteem. • Intel SpeedStep Alle kernen - standaard Hiermee kunt u de Intel SpeedStep-modus van de processor in- of uitschakelen. • Hiermee wordt Intel SpeedStep ingeschakeld. Deze optie is standaard ingesteld.
Opzioni Beschrijvingen Enable Advanced Battery Charge Configuration (Geavanceerde configuratie voor het laden van de batterij inschakelen) Met deze optie kunt u de batterijstatus maximaliseren. Als u deze optie inschakelt, gebruikt uw systeem het standaardoplaadalgoritme en andere technieken om tijdens inactieve uren de batterijstatus te verbeteren.
Optie Beschrijving • Fastboot Lock Mode Enable/Secondary (Vergrendelingsmodus inschakelen/secundair) Hiermee kunt u het opstarten versnellen door enkele compatibiliteitsstappen over te slaan. De opties zijn: • • • Minimal (Minimaal) Thorough (Grondig): standaard ingeschakeld Auto (Automatisch) Extended BIOS POST Time Hiermee kunt u een extra vertraging voor het opstarten instellen. De opties zijn: • • • 0 seconds (0 seconden): standaard ingeschakeld.
Opzioni Beschrijvingen Start Data Wipe (Gegevens wissen starten) Als deze optie is ingeschakeld zal het BIOS een gegevenswiscyclus in de wachtrij zetten voor opslagapparaten die zijn verbonden met het moederbord wanneer de computer de volgende keer opstart. Dit is standaard uitgeschakeld. Allow BIOS Downgrade Met dit veld kunt u het terugzetten van de systeemfirmware naar een vorige revisie beheren. Dit is standaard ingeschakeld.
Het BIOS bijwerken op systemen waarop BitLocker is ingeschakeld WAARSCHUWING: Als BitLocker niet wordt onderbroken voordat het BIOS wordt bijgewerkt, herkent het systeem de BitLocker-sleutel niet de volgende keer dat u het systeem opnieuw opstart. U wordt vervolgens gevraagd om de herstelsleutel in te voeren om verder te gaan en het systeem zal dit bij elke herstart vragen. Als de herstelsleutel niet bekend is, kan dit leiden tot gegevensverlies of een onnodige herinstallatie van het besturingssysteem.
Systeem- en installatiewachtwoord Tabel 14. Systeem- en installatiewachtwoord Type wachtwoord Beschrijving System Password (Systeemwachtwoord) Wachtwoord dat moet worden ingevuld om aan uw systeem in te loggen. Installatiewachtwoord Wachtwoord dat moet worden ingevuld voor toegang en het aanbrengen van wijzigingen aan de BIOS-instellingen van uw computer. U kunt ter beveiliging van uw computer een wachtwoord voor het systeem en de installatie aanmaken.
Over deze taak Druk na het aanzetten of opnieuw opstarten van de computer onmiddellijk op F2 om naar de System Setup te gaan. Stappen 1. Selecteer System Security (Systeembeveiliging) in het scherm System BIOS (Systeem BIOS), of System Setup (Systeeminstallatie) en druk op Enter. Het scherm System Security (Systeembeveiliging) wordt geopend. 2. Controleer in het scherm System Security (Systeembeveiliging) of Password Status (Wachtwoordstatus) op Unlocked (Ontgrendeld) staat. 3.
4 Problemen oplossen Diagnostische Enhanced Pre-Boot System Assessment (ePSA) Over deze taak De ePSA-diagnose (ook bekend als systeemdiagnose) voert een volledige controle van uw hardware. ePSA maakt deel uit van het BIOS en wordt door het BIOS intern gestart.
M-BIST L-BIST Trigger De M-toets en aan/uit-knop indrukken Geïntegreerd in de enkele LED-foutcodediagnostiek. Automatisch gestart tijdens POST. Lampje of fout Batterij-LED met 'aanhoudend oranje' Foutcode van knipperende led voor batterijaanduiding [geel, wit] = [2,8] Reparatie-instructie Geeft een fout met het moederbord aan. Geeft een fout met het moederbord aan.
Tabel 16. Led-codes Diagnostische lampjescodes Omschrijving van het probleem 2,1 Processorfout 2,2 Moederbord: BIOS of ROM-fout (Read-Only Memory) 2,3 Geen geheugen of RAM (Random-Access Memory) gedetecteerd 2,4 Geheugen- of RAM-fout (Random-Access Memory) 2,5 Ongeldig geheugen geïnstalleerd 2,6 Systeemkaart- of chipsetfout 2,7 Fout in beeldscherm 2,8 LCD-stroomrailfout.
5 Behulpzame informatie vinden Onderwerpen: • Contact opnemen met Dell Contact opnemen met Dell Vereisten OPMERKING: Als u geen actieve internetverbinding hebt, kunt u contactgegevens ook vinden op uw factuur, pakbon, rekening of productcatalogus van Dell. Over deze taak Dell biedt diverse online en telefonische ondersteunings- en servicemogelijkheden. De beschikbaarheid verschilt per land en product en sommige services zijn mogelijk niet beschikbaar in uw regio.