Owner's manual

Back to Contents Page

 Internal Card With Bluetooth®Wireless Technology

Dell™Vostro™A90ServiceManual

Removing the Card

Replacing the Card



If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.

Removing the Card



1. Follow the instructions in Before You Begin.



2. Remove the module cover (see Removing the Module Cover).



3. Remove the keyboard (see Removing the Keyboard).



4. Remove the palm rest (see Removing the Palm Rest).



5. Turn the palm rest over.



6. Remove the two screws that secure the card to the palm rest.



7. Lift the card out of the palm rest.

Replacing the Card



1. Insert card into the slot and replace the two screws.



2. Turn the palm rest over.



3. Replace the palm rest (see Replacing the Palm Rest).



4. Replace the keyboard (see Replacing the Keyboard).



CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface

(such as a connector on the back of the computer).

screw (2)

internal card with Bluetooth wireless technology

cable

