دليل مالك Dell Vostro V131 النموذج الرقابيP18S النوع الرقابيP18S001
الملاحظات والتنبيهات والتحذيرات ملاحظة: تشير كلمة "ملاحظة" إلى المعلومات الهامة التي تساعدك على تحقيق أقصى استفادة من الكمبيوتر لديك. تنبيه: تشير كلمة "تنبيه" إلى احتمال حدوث ضرر بالأجهزة أو فقدان البيانات إذا لم يتم اتباع الإرشادات. تحذير: تشير كلمة "تحذير" إلى احتمال حدوث ضرر بالممتلكات أو تعرض الأشخاص للإصابة أو الموت. المعلومات الواردة في هذا المنشور عرضة للتغيير دون إشعار. حقوق الطبع والنشر © Dell Inc. 2011جميع الحقوق محفوظة.
جدول المحتويات الملاحظات والتنبيهات والتحذيرات2....................................................................................... فصل :1العمل في جهاز الكمبيوتر7......................................................................................... 7................................................................................................................... قبل العمل داخل الكمبيوتر 8.............................................................................................
فصل :9إزالة مسند راحة اليد25............................................................................................ 26..................................................................................................................... تركيب مسند راحة اليد فصل :10إزالة بطاقة شبكة الاتصال المحلية اللاسلكية )29...........................................(WLAN تركيب بطاقة شبكة الاتصال اللاسلكية محلية النطاق ) (WLAN 30...................................................
فصل :21إزالة لوحة 61.............................................................................................HDMI (HDMI تركيب لوحة وصلة الوسائط المتعددة عالية الوضوح ) 62................................................... فصل :22إزالة مكبرات الصوت63.......................................................................................... تركيب مكبرات الصوت 64...................................................................................................................
العمل في جهاز الكمبيوتر 1 قبل العمل داخل الكمبيوتر التزم بإرشادات الأمان التالية للمساعدة على حماية الكمبيوتر من التعرض لتلف محتمل ،وللمساعدة كذلك على ضمان السلامة الشخصية .ما لم يتم الإشارة إلى غير ذلك ،فإن كل إجراء متضمن في هذا المستند يفترض وجود الظروف التالية: • • • اتبعت الخطوات في قسم العمل في جهاز الكمبيوتر. قيامك بقراءة معلومات الأمان الواردة مع الكمبيوتر.
ملاحظة: قد تظهر ألوان الكمبيوتر الخاص بك وبعض المكونات المحددة مختلفةً عما هو مبيّن في هذا المستند. لتجنب إتلاف الكمبيوتر ،قم بإجراء الخطوات التالية قبل التعامل مع الأجزاء الداخلية للكمبيوتر. .1 تأكد أن سطح العمل مسطح ونظيف لوقاية غطاء الكمبيوتر من التعرض للخدوش. .2 قم بإيقاف تشغيل الكمبيوتر )انظر إيقاف تشغيل الكمبيوتر(. .3 في حالة توصيل الكمبيوتر بجهاز إرساء )متصل( مثل قاعدة وسائط أو شريحة بطارية اختيارية، فقم بإلغاء توصيله.
• القرص المضغوط لبرنامج تحديث Flash BIOS إيقاف تشغيل الكمبيوتر تنبيه: لتفادي فقد البيانات ،قم بحفظ وإغلاق جميع الملفات المفتوحة وقم بإنهاء جميع البرامج المفتوحة قبل إيقاف تشغيل الكمبيوتر. .1 قم بإيقاف تشغيل نظام التشغيل على النحو التالي: • في نظام التشغيل :Windows Vista انقر فوق ) Startابدأ( ثم انقر فوق السهم الموجود في الركن الأيمن السفلي من القائمة ) Startابدأ( كما هو معروض أدناه ،ثم انقر فوق ) Shut Downإيقاف التشغيل(. • .
إزالة بطاقة )Secure Digital (SD .1 .2 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. اضغط على بطاقة SDلتحريرها من الكمبيوتر. .3 أمسك بطاقة SDواسحبها للخارج لتحريرها من الكمبيوتر. 2 تركيب بطاقة )Secure Digital (SD .1 .2 قم بإزاحة بطاقة SDإلى الفتحة الخاصة بها واضغط حتى تستقر في مكانها. اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة البطارية .1 .2 .3 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة بطاقة ).Secure Digital (SD أزح مزاليج التحرير لإلغاء قفل البطارية. .4 قم بإزالة البطارية من الكمبيوتر.
تركيب البطارية .1 أدخل البطارية داخل التجويف الخاص بها. .2 .3 .4 أدخل البطارية في الفتحة الخاصة بها حتى تصدر تكه دليل على استقرارها في مكانها. قم بتركيب بطاقة ).Secure Digital (SD اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة بطاقة وحدة هوية المشترك ))SIM .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 اضغط على بطاقة SIMلتحريرها من الكمبيوتر. .4 أمسك بطاقة SIMواسحبها للخارج لتحريرها من الكمبيوتر. 4 تركيب بطاقة وحدة هوية المشترك )(SIM .1 أدخل بطاقة SIMفي الفتحة. .2 قم بتركيب البطارية. .3 اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة لوحة المفاتيح 5 .1 .2 .3 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة البطارية. أخرج لوحة المفاتيح باستخدام المفك ذو الرأس المفلطح لإزالة أدوات احتجاز لوحة المفاتيح المثبتة للوحة المفاتيح في الكمبيوتر. .4 اقلب لوحة المفاتيح رأسًا على عقب وقم بإمالتها فوق مسند راحة اليد. .5 ارفع المشبك لتحرير كبل لوحة المفاتيح وافصله من لوحة النظام.
.6 ارفع لوحة المفاتيح لأعلى بعيدًا عن الكمبيوتر. تركيب لوحة المفاتيح .1 .2 .3 .4 صل كبل لوحة المفاتيح بلوحة النظام. أدخل لوحة المفاتيح داخل التجويف الخاص بها. اضغط حتى تستقر لوحة المفاتيح في مكانها في الكمبيوتر. قم بتركيب البطارية. .5 اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة غطاء القاعدة .1 .2 .3 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة البطارية. قم بفك المسمار المثبت لغطاء القاعدة في الكمبيوتر. .4 أزح غطاء القاعدة باتجاه الجزء الخلفي من الكمبيوتر .ارفعه لأعلى بعيدًا عن الكمبيوتر.
تركيب غطاء القاعدة .1 قم بمحازاة حافة غطاء القاعدة فوق الكمبيوتر وقم بإزاحته إلى داخل الكمبيوتر. .2 .3 .4 اربط المسمار المثبت لغطاء القاعدة في الكمبيوتر. قم بتركيب البطارية اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة الذاكرة .1 .2 .3 .4 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة البطارية. قم بإزالة غطاء القاعدة. قم بثني مشابك الاحتجاز بعيدًا عن وحدة الذاكرة حتى تنبثق وحدة الذاكرة. .5 قم بإزالة وحدة الذاكرة من الكمبيوتر.
تركيب الذاكرة .1 أدخل الذاكرة في المقبس الخاص بها. .2 .3 .4 .5 اضغط على المشابك لتثبيت وحدة الذاكرة في لوحة النظام. قم بتركيب غطاء القاعدة. قم بتركيب البطارية. اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة محرك الأقراص الثابتة .1 .2 .3 .4 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة البطارية. قم بإزالة غطاء القاعدة. قم بإزالة المسمار المثبت لمزلاج محرك الأقراص الثابتة في مكانه. .5 أزح وحدة محرك الأقراص الثابتة جهة اليسار. .6 ارفع محرك الأقراص الثابتة لأعلى وقم بإزالته من الكمبيوتر.
.7 قم بإزالة المسامير المثبتة لحامل محرك الأقراص الثابتة في محرك الأقراص الثابتة .افصل حامل محرك الأقراص الثابتة عن محرك الأقراص الثابتة. تركيب محرك الأقراص الثابتة .1 قم بمحازاة حامل محرك الأقراص الثابتة مع محرك الأقراص الثابتة. .2 اربط المسامير الموجودة في محرك الأقراص الثابتة لتثبيت حامل محرك الأقراص الثابتة في محرك الأقراص الثابتة. .3 أزح محرك الأقراص الثابتة داخل العلبة الموجودة في لوحة النظام. .
إزالة مسند راحة اليد .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة غطاء القاعدة. .4 قم بإزالة لوحة المفاتيح. .5 قم بإزالة محرك الأقراص الثابتة. .6 قم بإزالة المسامير من الجزء السفلي للكمبيوتر والمثبتة لمسند راحة اليد. .7 قم بإزالة المسامير المثبتة لمسند راحة اليد. .
• • .9 لوحة الوسائط )(2 لوحة اللمس )(3 باستخدام مخطاط بلاستيكي ،ارفع جوانب مسند راحة اليد وقم بإزالتها من الكمبيوتر. تركيب مسند راحة اليد .1 .2 قم بمحازاة مسند راحة اليد في مكانه الأصلي في الكمبيوتر وثبته في مكانه برفق.
.3 .4 .5 .6 .7 .8 .9 • لوحة اللمس )(3 اربط المسامير الموجودة في مسند راحة اليد لتثبيت مسند راحة اليد في مكانه. اربط المسامير المثبتة للقاعدة السفلية للكمبيوتر المثبتة لمسند راحة اليد. قم بتركيب محرك الأقراص الثابتة. قم بتركيب لوحة المفاتيح. قم بتركيب غطاء القاعدة. قم بتركيب البطارية. اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة بطاقة شبكة الاتصال المحلية اللاسلكية 10 )(WLAN .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة غطاء القاعدة. .4 قم بإزالة لوحة المفاتيح. .5 قم بإزالة محرك الأقراص الثابتة. .6 قم بإزالة مسند راحة اليد. .7 افصل كبلات الهوائي من بطاقة .WLAN .8 قم بإزالة المسمار المثبت لبطاقة WLANفي لوحة النظام.
.9 قم بإزالة بطاقة .WLAN تركيب بطاقة شبكة الاتصال اللاسلكية محلية النطاق )(WLAN .1 .2 .3 .4 .5 .6 .7 .8 .9 30 أدخل بطاقة WLANبزاوية 45درجة داخل الفتحة. صل كبلات الهوائي بالموصلات الخاصة بها والمميزة على بطاقة .WLAN اربط المسمار بإحكام لتثبيت بطاقة WLANفي مكانها. قم بتركيب مسند راحة اليد. قم بتركيب محرك الأقراص الثابتة. قم بتركيب لوحة المفاتيح. قم بتركيب غطاء القاعدة. قم بتركيب البطارية.
إزالة بطاقة شبكة الاتصال اللاسلكية واسعة 11 النطاق )(WWAN .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة غطاء القاعدة. .4 قم بإزالة لوحة المفاتيح. .5 قم بإزالة محرك الأقراص الثابتة. .6 قم بإزالة مسند راحة اليد. .7 قم بفصل كابلات الهوائي من بطاقة .WWAN .8 قم بإزالة المسمار اللولبي الذي يثبت بطاقة WWANفي لوحة النظام.
.9 قم بإزالة بطاقة .WWAN تركيب الشبكة اللاسلكية واسعة النطاق )(WWAN .1 .2 .3 .4 .5 .6 .7 .8 .9 32 أدخل بطاقة WWANبزاوية 45درجة داخل الفتحة. صل كبلات الهوائي بالموصلات الخاصة بها. اربط المسمار بإحكام لتثبيت بطاقة WWANفي مكانها. قم بتركيب مسند راحة اليد. قم بتركيب محرك الأقراص الثابتة. قم بتركيب لوحة المفاتيح. قم بتركيب غطاء القاعدة. قم بتركيب البطارية. اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة مجموعة الشاشة .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. 12 .3 قم بإزالة غطاء القاعدة. .4 قم بإزالة لوحة المفاتيح. .5 قم بإزالة محرك الأقراص الثابتة. .6 قم بإزالة مسند راحة اليد. .7 قم بإزالة المسامير من قاعدة الكمبيوتر المثبتة لمجموعة الشاشة. .8 اقلب الكمبيوتر .افصل كبلات WLANو WWANوحرر الكبلات من قناة التوجيه الموجودة في الهيكل المعدني للقاعدة السفلية. .
.10قم بإزالة المسمار المثبت للمفصلة اليمنى. .11ارفع مجموعة الشاشة لأعلى برفق من قاعدة الكمبيوتر.
تركيب مجموعة الشاشة .1 قم بمحازاة مجموعة الشاشة مع قاعدة الكمبيوتر. .2 .3 .4 .5 اربط المسمار المثبت للمفصلة اليمنى في مكانها. اربط المسامير المثبتة لمجموعة الشاشة في الهيكل المعدني للقاعدة السفلية. صل كبل الشاشة في الموصل الموجود في لوحة النظام. قم بتوجيه كبلات WLANو WWANبطول قنوات التوجيه الخاصة بها وصلها بالوحدات الخاصة بها. قم بتركيب مسند راحة اليد. .6 .7قم بتركيب محرك الأقراص الثابتة. .8قم بتركيب لوحة المفاتيح. .
إزالة إطار الشاشة .1 .2 .3 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة البطارية. ارفع إطار الشاشة من الداخل للخارج لتحريره من مجموعة الشاشة. .4 ارفع إطار الشاشة وقم بإزالته من مجموعة الشاشة.
تركيب إطار الشاشة .1 قم بمحازاة إطار الشاشة مع مجموعة الشاشة. .2 بداية من الركن الأعلى ،اضغط على إطار الشاشة وتعامل بطول الإطار بالكامل حتى يستقر داخل مجموعة الشاشة. قم بتركيب البطارية. اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر. .3 .
إزالة لوحة الشاشة .1 .2 .3 .4 .5 14 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة البطارية. قم بإزالة غطاء القاعدة. قم بإزالة لوحة المفاتيح. قم بإزالة مسند راحة اليد. .6قم بإزالة بطاقة شبكة الاتصال المحلية اللاسلكية ).(WLAN .7قم بإزالة بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN .8قم بإزالة مجموعة الشاشة. .9قم بإزالة إطار الشاشة. .10قم بإزالة المسامير المثبتة للوحة الشاشة في مجموعة الشاشة. .
.12افصل الشريط اللاصق المثبت لوصلة إشارة التيار المنخفض التفاضلي ) (LVDSفي لوحة الشاشة. .13افصل كبل LVSDمن لوحة الشاشة. .14قم بإزالة لوحة الشاشة من الكمبيوتر.
تركيب لوحة الشاشة .1 صل كبل الشاشة بلوحة الشاشة واربط الشريط اللاصق لتثبيت الوصلة. .2 صل كبل إشارة التيار المنخفض التفاضلي ) (LVDSبلوحة الشاشة. .3 أعد وضع الشريط اللاصق المثبت لوصلة LVDSفي لوحة الشاشة. .4 قم بمحازاة لوحة الشاشة في مكانها الأصلي في مجموعة الشاشة. .5 اربط المسامير الأربعة المثبتة لوحة الشاشة في غطاء الشاشة. .6 قم بتركيب إطار الشاشة. .7 قم بتركيب مجموعة الشاشة. .
إزالة الكاميرا .1 .2 .3 .4 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة البطارية. قم بإزالة إطار الشاشة. افصل كبل الكاميرا من وحدة الكاميرا. .5 أخرج الكاميرا برفق من وحدة الكاميرا.
تركيب الكاميرا .1 قم بمحازاة الكاميرا في وحدة الكاميرا. .2 .3 .4 .5 .6 صل الشريط اللاصق لتثبيت الكاميرا في مكانها. صل كبل الكاميرا بوحدة الكاميرا. قم بتركيب إطار الشاشة. قم بتركيب البطارية. اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة مفصلات الشاشة .1 .2 .3 .4 .5 16 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة البطارية. قم بإزالة غطاء القاعدة. قم بإزالة لوحة المفاتيح. قم بإزالة محرك الأقراص الثابتة. .6قم بإزالة مسند راحة اليد. .7قم بإزالة لوحة الشاشة. .8قم بإزالة مجموعة الشاشة. .9قم بإزالة إطار الشاشة. .10قم بإزالة كبلات الهوائي اللاسلكي من مفصلات الشاشة اليسرى. .
.12قم بإزالة المسامير المثبتة لمفصلة الشاشة اليسرى في الغطاء الخلفي للشاشة. .13قم بإزالة مفصلة الشاشة اليسرى من الشاشة.
ملاحظة: الرجاء اتباع نفس الإجراء لإزالة مفصلة الشاشة اليمنى. تركيب مفصلات الشاشة .1 .2 .3 .4 قم بمحازاة مفصلة الشاشة في الموضع المناسب. اربط المسامير المثبتة لمفصلة الشاشة اليسرى. صل كبل إشارة التيار المنخفض التفاضلي ) (LVDSوالكبل اللاسلكي بمفصلة الشاشة اليسرى. قم بتركيب إطار الشاشة. .5قم بتركيب لوحة الشاشة. .6قم بتركيب مجموعة الشاشة. .7قم بتركيب مسند راحة اليد. .8قم بتركيب محرك الأقراص الثابتة. .9قم بتركيب لوحة المفاتيح. .
إزالة المروحة الحرارية .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة غطاء القاعدة. .4 قم بإزالة لوحة المفاتيح. .5 قم بإزالة محرك الأقراص الثابتة. .6 قم بإزالة مسند راحة اليد. .7 افصل كبل المروحة الحرارية من لوحة الإدخال/الإخراج. .8 قم بإزالة المسامير المثبتة للمروحة الحرارية في الكمبيوتر. .9 ارفع المروحة الحرارية وقم بإزالتها من الكمبيوتر.
تركيب المروحة الحرارية .1 أدخل المروحة الحرارية إلى داخل الفتحة. .2 .3 .4 .5 اربط المسامير المثبتة للمروحة الحرارية. قم بتركيب مسند راحة اليد. قم بتركيب محرك الأقراص الثابتة. قم بتركيب لوحة المفاتيح. .6 .7 .8 قم بتركيب غطاء القاعدة. قم بتركيب البطارية. اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة لوحة النظام .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة بطاقة وحدة هوية المشترك ).(SIM .4 قم بإزالة بطاقة ).Secure Digital (SD .5 قم بإزالة غطاء القاعدة. .6 قم بإزالة لوحة المفاتيح. .7 قم بإزالة محرك الأقراص الثابتة. .8 قم بإزالة الذاكرة. .9 قم بإزالة مسند راحة اليد. 18 .10قم بإزالة بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN .
.15ارفع لوحة النظام لأعلى وقم بإزالتها من الهيكل.
تركيب لوحة النظام .1 قم بتوصيل كبل DC-Inبلوحة النظام. .2 .3 .4 .5 .6 .7 أدخل لوحة النظام إلى داخل الفتحة. قم بإعادة وضع المسامير لإحكام تثبيت لوحة النظام بالهيكل. قم بتركيب مجموعة الشاشة. قم بتركيب بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN قم بتركيب بطاقة شبكة الاتصال اللاسلكية محلية النطاق ).(WLAN قم بتركيب مسند راحة اليد. .8 .9 .10 .11 .12 .13 .14 .15 قم بتركيب الذاكرة.
إزالة البطارية الخلوية المصغرة .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة غطاء القاعدة. .4 قم بإزالة لوحة المفاتيح. .5 قم بإزالة محرك الأقراص الثابتة. .6 قم بإزالة مسند راحة اليد. .7 استخدم مخطاط بلاستيكي لرفع البطارية الخلوية المصغرة. .8 قم بإزالة البطارية الخلوية المصغرة من الكمبيوتر.
تركيب البطارية الخلوية المصغرة .1 .2 .3 .4 .5 .6 .7 56 أدخل البطارية الخلوية المصغرة بالعلبة الخاصة بها. قم بتركيب مسند راحة اليد. قم بتركيب محرك الأقراص الثابتة. قم بتركيب لوحة المفاتيح. قم بتركيب غطاء القاعدة. قم بتركيب البطارية. اتبع الإجراءات الواردة في قسم بعد العمل داخل الكمبيوتر.
إزالة المشتت الحراري .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة بطاقة وحدة هوية المشترك ).(SIM .4 قم بإزالة بطاقة ).Secure Digital (SD .5 قم بإزالة غطاء القاعدة. .6 قم بإزالة لوحة المفاتيح. .7 قم بإزالة محرك الأقراص الثابتة. .8 قم بإزالة الذاكرة. .9 قم بإزالة مسند راحة اليد. 20 .10قم بإزالة بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN .
.16ارفع المشتت الحراري من لوحة النظام وقم بإزالته.
تركيب المشتت الحراري .1 أدخل المشتت الحراري داخل التجويف الخاص بها. .2 .3 .4 .5 .6 .7 اربط مسامير التثبيت لتثبيت المشتت الحراري في مكانه. صل كبل المروحة في لوحة النظام. قم بتركيب لوحة النظام. قم بتركيب مجموعة الشاشة. قم بتركيب بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN قم بتركيب بطاقة شبكة الاتصال اللاسلكية محلية النطاق ).(WLAN .8 .9 .10 .11 .12 .13 .14 .15 .16 قم بتركيب مسند راحة اليد.
إزالة لوحة HDMI .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة بطاقة وحدة هوية المشترك ).(SIM .4 قم بإزالة بطاقة ).Secure Digital (SD .5 قم بإزالة غطاء القاعدة. .6 قم بإزالة لوحة المفاتيح. .7 قم بإزالة محرك الأقراص الثابتة. .8 قم بإزالة الذاكرة. .9 قم بإزالة مسند راحة اليد. 21 .10قم بإزالة بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN .
تركيب لوحة وصلة الوسائط المتعددة عالية الوضوح )(HDMI .1 أعد وضع لوحة HDMIفي التجويف الخاص بها. قم بتركيب لوحة النظام. قم بتركيب مجموعة الشاشة. قم بتركيب بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN قم بتركيب بطاقة شبكة الاتصال اللاسلكية محلية النطاق ).(WLAN قم بتركيب مسند راحة اليد. قم بتركيب الذاكرة. .8 .9 .10 .11 .12 .13 .14 قم بتركيب محرك الأقراص الثابتة. قم بتركيب لوحة المفاتيح. قم بتركيب غطاء القاعدة.
إزالة مكبرات الصوت .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة بطاقة وحدة هوية المشترك ).(SIM .4 قم بإزالة بطاقة ).Secure Digital (SD .5 قم بإزالة غطاء القاعدة. .6 قم بإزالة لوحة المفاتيح. .7 قم بإزالة محرك الأقراص الثابتة. .8 قم بإزالة الذاكرة. .9 قم بإزالة مسند راحة اليد. 22 .10قم بإزالة بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN .
تركيب مكبرات الصوت .1 أعد وضع مكبرات الصوت في وضعها الأصلي. .2 أدخل كبل مكبر الصوت داخل المزاليج لتثبيت مكبرات الصوت في مكانها. .3 قم بتركيب لوحة النظام. .4 قم بتركيب مجموعة الشاشة. .5 قم بتركيب بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN .6 قم بتركيب بطاقة شبكة الاتصال اللاسلكية محلية النطاق ).(WLAN .7 قم بتركيب مسند راحة اليد. .8 قم بتركيب الذاكرة. .9 قم بتركيب محرك الأقراص الثابتة. .
إزالة لوحة الإدخال/الإخراج ))I/O .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة بطاقة وحدة هوية المشترك ).(SIM .4 قم بإزالة بطاقة ).Secure Digital (SD .5 قم بإزالة غطاء القاعدة. .6 قم بإزالة لوحة المفاتيح. .7 قم بإزالة محرك الأقراص الثابتة. .8 قم بإزالة الذاكرة. .9 قم بإزالة مسند راحة اليد. 23 .10قم بإزالة بطاقة شبكة الاتصال المحلية اللاسلكية ).
تركيب لوحة الإدخال/الإخراج )(I/O .1 أدخل لوحة الإدخال/الإخراج ) (I/Oإلى داخل الفتحة. .2 صل كبل مكبر الصوت بلوحة ) I/Oالإدخال/الإخراج(. .3 قم بتركيب لوحة النظام. .4 قم بتركيب مجموعة الشاشة. .5 قم بتركيب المشتت الحراري. .6 قم بتركيب بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN .7 قم بتركيب بطاقة شبكة الاتصال اللاسلكية محلية النطاق ).(WLAN .8 قم بتركيب مسند راحة اليد. .9 قم بتركيب الذاكرة. .
إزالة منفذ DC-In .1 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. .2 قم بإزالة البطارية. .3 قم بإزالة بطاقة وحدة هوية المشترك ).(SIM .4 قم بإزالة بطاقة ).Secure Digital (SD .5 قم بإزالة غطاء القاعدة. .6 قم بإزالة لوحة المفاتيح. .7 قم بإزالة محرك الأقراص الثابتة. .8 قم بإزالة الذاكرة. .9 قم بإزالة مسند راحة اليد. 24 .10قم بإزالة بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN .
.15ارفع منفذ DC-inوقم بإزالته من القاعدة السفلية.
تركيب منفذ DC-in .1 أعد وضع موصل DC-Inفي التجويف الخاص به. .2 .3 .4 .5 .6 .7 اربط المسمار الوحيد بإحكام لتثبيت منفذ DC-inفي مكانه. قم بتوصيل كبل DC-Inبلوحة النظام. قم بتركيب مجموعة الشاشة. قم بتركيب بطاقة شبكة الاتصال اللاسلكية واسعة النطاق ).(WWAN قم بتركيب بطاقة شبكة الاتصال اللاسلكية محلية النطاق ).(WLAN قم بتركيب مسند راحة اليد. .8 .9 .10 .11 .12 .13 .14 .15 قم بتركيب الذاكرة.
إزالة كبل LVDS .1 .2 .3 .4 .5 25 اتبع الإجراءات الواردة في قسم قبل العمل داخل الكمبيوتر. قم بإزالة البطارية. قم بإزالة غطاء القاعدة. قم بإزالة لوحة المفاتيح. قم بإزالة محرك الأقراص الثابتة. .6قم بإزالة مسند راحة اليد. .7قم بإزالة لوحة الشاشة. .8قم بإزالة مجموعة الشاشة. .9قم بإزالة مفصلة الشاشة. .10افصل كبل إشارة التيار المنخفض التفاضلي ) (LVDSمن وحدة الكاميرا. .
تركيب كبل إشارة التيار المنخفض التفاضلي )(LVDS .1 قم بتوجيه كبلات LVDSداخل الحامل الخاص بها في الغطاء العلوي للشاشة. .2 .3 .4 .5 صل كبل LVDSبوحدة الكاميرا. قم بتركيب مفصلة الشاشة. قم بتركيب مجموعة الشاشة. قم بتركيب لوحة الشاشة. .6قم بتركيب مسند راحة اليد. .7قم بتركيب محرك الأقراص الثابتة. .8قم بتركيب لوحة المفاتيح. .9قم بتركيب غطاء القاعدة. .10قم بتركيب البطارية. .
26 إعداد النظام نظرة عامة على إعداد النظام يتيح لك إعداد النظام: • • • تغيير معلومات تهيئة النظام بعد أن تقوم بإضافة أي أجهزة في الكمبيوتر الخاص بك أو تغييرها أو إزالتها. ضبط أو تغيير أي من الخيارات القابلة للتحديد من قبل المستخدم مثل كلمة المرور الخاصة بالمستخدم. قراءة حجم الذاكرة الحالي أو ضبط نوع محرك الأقراص الثابتة المثبت. قبل استخدام برنامج ) System Setupإعداد النظام( ،يُوصى بتدوين معلومات شاشة System Setup )إعداد النظام( للرجوع إليها مستقبلاً.
ويحتوي على معلومات حول كل النظام .يسرد الحقل الميزات التي تحدد تكوين الكمبيوتر ،بما في ذلك خيار يتم سرده في قائمة الخيارات . في هذا الحقل ،يمكنك عرض الأجهزة المثبتة ،وتوفير التيار، معلومات حول الكمبيوتر وإجراء وميزات الأمان قم بالتمرير لأعلى تغييرات في الإعدادات الحالية. ولأسفل داخل القائمة باستخدام مفاتيح الأسهم لأعلى ولأسفل .بينما اضغط على >
معلومات النظام تعرض رقم موديل الكمبيوتر. وقت النظام يقوم بإعادة تعيين الوقت الموجود في التقويم الداخلي للكمبيوتر. تاريخ النظام يقوم بإعادة تعيين التاريخ الموجود في التقويم الداخلي للكمبيوتر. إصدار نظام الإدخال والإخراج الأساسي )(BIOS تعرض إصدار .BIOS اسم المنتج تعرض اسم المنتج ورقم الموديل. رمز الخدمة يعرض رمز الخدمة الخاص بالكمبيوتر. رمز الأصل يعرض رمز الأصل الخاص بالكمبيوتر )في حالة توفره(.
المحاكاة الافتراضية التقنية الظاهرية لـ التقنية الظاهرية لـ الحالة الافتراضية :ممكنة .Intel NICمتكامل تقوم بتمكين أو تعطيل مصدر الإمداد الحالة الافتراضية :ممكنة بالطاقة إلى بطاقة الشبكة المستخدمة. محاكاة USB يقوم بتمكين أو تعطيل ميزة محاكاة USB الحالة الافتراضية :ممكنة USB Powershare يقوم بتمكين أو تعطيل ميزة USB powershare الحالة الافتراضية :ممكنة دعم تنبيه USB يتيح لأجهزة USBإمكانية تنبيه الكمبيوتر من وضع الاستعداد .
تعيين كلمة مرور النظام تتيح لك تحديد كلمة مرور النظام أو تغييرها أو حذفها تعيين كلمة مرور HDD تتيح لك إمكانية تعيين كلمة مرور على محرك القرص الثابت الداخلي بالكمبيوتر ).(HDD كلمة مرور عند التمهيد التمكين أو التعطيل لتعيين كلمة المرور عند التمهيد. تجاوز كلمة المرور يتيح لك إمكانية تجاوز كلمة مرور النظام وأوامر كلمة مرور HDDالداخلية أثناء إعادة تشغيل/استئناف /النظام من حالة الإسبات. Computrace تقوم بتمكين أو تعطيل ميزة Computraceفي الكمبيوتر.
التشخيصات 27 مصابيح حالة الجهاز يضيء عندما تقوم بتشغيل الكمبيوتر ،ويومض عندما يكون الكمبيوتر في أحد أوضاع إدارة الطاقة. يضيء عندما يقوم الكمبيوتر اللوحي بقراءة البيانات أو كتابتها. يضيء هذا المصباح بشكل متصل أو يومض للإشارة إلى حالة شحن البطارية. يضيء عند تمكين الاتصال اللاسلكي بالشبكة. حالة LED ملاحظة: توجد أربع مصابيح LEDفي مقدمة النظام.
الاستعداد أبيض ثابت مضاء أبيض ثابت LED مصباح LEDلشحن البطارية بالحافة الأمامية )مصدر التيار :البطارية ،شحن البطارية<= : شحن بنسبة (10% الإسبات مطفأ الاستعداد ضوء كهرماني ثابت مضاء ضوء كهرماني ثابت LED مصباح LEDلشحن البطارية بالحافة الأمامية )مصدر التيار :البطارية ،شحن البطارية<= : شحن بنسبة (10% الإسبات مطفأ الاستعداد ضوء كهرماني ثابت مضاء ضوء كهرماني ثابت LED مصباح LEDلمحرك الأقراص الثابتة )(HDD الإسبات مطفأ الاستعداد
أكواد الإشارة الصوتية ،بتحديد مشكلات عديدة .وتصل مدة التأخير بين كل إشارة وأخرى إلى 300مل/ ث ،ويصل التأخير بين كل مجموعة من الإشارات إلى 3ثوان ،ويستمر صدور الإشارة الصوتية لمدة 300مل/ث .وبعد كل إشارة صوتية وكل مجموعة من الإشارات الصوتية ،ينبغي أن يكتشف BIOSما إذا كان المستخدم يضغط على زر التشغيل .فإذا كان الأمر كذلك ،فسيخرج BIOSمن الحلقة ويقوم بتنفيذ عملية إيقاف التشغيل العادية ،ونظام التشغيل.
السبب عطل في المعالج خطوات استكشاف المشكلات وإصلاحها عطل في المعالج الكود 8 السبب الشاشة خطوات استكشاف المشكلات وإصلاحها عطل في الشاشة مصابيح حالة لوحة المفاتيح تشير المصابيح الموجودة فوق لوحة المفاتيح إلى ما يلي: LED الوصف اللون الوظيفة الافتراضية Caps Lock 1 يضيء عند تمكين وظيفة Caps .Lock أبيض معطل 2لوحة اللمس معطلة تضيء عندما تكون لوحة اللمس معطلة.
28 المواصفات الفنية ملاحظة: قد تختلف العروض حسب المنطقة .المواصفات التالية هي فقط المطلوبة بموجب القانون للتضمين مع الكمبيوتر .لمزيد من المعلومات المتعلقة بتهيئة الكمبيوتر ،انقر فوق ) Startابدأ( → Help and Support )التعليمات والدعم( وحدد الخيار لعرض معلومات حول الكمبيوتر.
الصوت وحدة التحكم Conexant CX20671 تحويل الاستريو 24بت )تناظري إلى رقمي ورقمي إلى تناظري( الوصلة: داخلية صوت عالي الدقة خارجية موصل دخل/سماعات رأس الاستريو متعدد الوظائف مكبرات الصوت اثنان ) 2وات( مضخم مكبر صوت داخلي اثنان ) 2وات( عناصر التحكم في مستوى الصوت قوائم البرامج ،وعناصر التحكم في الوسائط ،ومفاتيح وظيفة لوحة المفاتيح الاتصالات مهايئ الشبكة شبكة Ethernet LANذات 10/100/1000ميجابات/ث الاتصال اللاسلكي الشبكة المحلية ال
الشاشة الأبعاد: الارتفاع 188.75مم ) 7.43بوصة( العرض 314.10مم ) 12.36بوصة( الارتفاع Z 3.60مم ) 0.14بوصة( الخط القطري 337.82مم ) 13.30بوصة( الحد الأقصى للدقة x 768 1366بكسل بـ 262ألف لون الحد الأقصى للسطوع 170شمعة معدل التحديث 60هرتز زاوية التشغيل من ) °0مغلق( إلى °135 زاويا العرض الأدنى: أفقيًا CR ≥ 10 @ 40/40 رأسيًا CR ≥ 10 @ 15/30 نسق البكسل 0.2148مم x 0.
البطارية 4خلايا و 6خلايا 48.64مم ) 1.91بوصة( الارتفاع: 4خلايا 20.20مم ) 0.80بوصة( 6خلايا 31.20مم ) 1.23بوصة( العرض: 4خلايا و 6خلايا 269.30مم ) 10.60بوصة( الوزن: 4خلايا 240.00جم ) 0.53رطل( 6خلايا 340.00جم ) 0.75رطل( الجهد الكهربي: 4خلايا 14.8فولت 6خلايا 11.
مهايئ التيار المتردد الأبعاد: الارتفاع 29مم ) 1.14بوصة( العرض 46.50مم ) 1.83بوصة( العمق 107مم ) 4.21بوصة( نطاق درجة الحرارة: أثناء التشغيل من 0درجة مئوية إلى 40درجة مئوية )من 32درجة فهرنهايت إلى 104درجة °فهرنهايت( في حالة عدم التشغيل من – 40درجة مئوية إلى 70درجة مئوية )من –40 درجة فهرنهايت إلى 158درجة فهرنهايت( الجوانب المادية الارتفاع )مع لوحة (WLED من 16.05مم إلى 21.00مم )من 0.63بوصة إلى 0.
الخصائص البيئية أثناء التشغيل Grms (2 0.66هرتز 600هرتز( أثناء التخزين Grms (2 1.30هرتز 600هرتز( الحد الأقصى لتحمل الاصطدام: أثناء التشغيل G 110 أثناء التخزين G 160 مستوى الأوساخ العالقة 88 G1أو أقل كما يحدده معيار ISA-S71.
الاتصال بشركة Dell 29 الاتصال بشركة Dell ملاحظة: إذا لم يكن لديك اتصال نشط بالإنترنت ،يمكنك العثور على معلومات الاتصال على فاتورة الشراء الخاصة بك أو استمارة التغليف أو الفاتورة أو بيان منتج .Dell توفر Dellخيارات خدمات عبر الإنترنت ،وعبر الاتصالات الهاتفية خاصة بالدعم .يختلف التوفر حسب البلد والمنتج ،وقد لا تتوفر بعض الخدمات في منطقتك .للاتصال بشركة Dellفيما يتعلق بالمبيعات ،أو الدعم الفني ،أو خدمة العملاء: .1 .2 .3 .4 تفضل بزيارة .