Dell PowerConnect W-Series ArubaOS 6.
Copyright © 2010 Aruba Networks, Inc. AirWave®, Aruba Networks®, Aruba Mobility Management System®, and other registered marks are trademarks of Aruba Networks, Inc. Dell™, the DELL™ logo, and PowerConnect™ are trademarks of Dell Inc. All rights reserved. Specifications in this manual are subject to change without notice. Originated in the USA. Any other trademarks appearing in this manual are the property of their respective companies.
Contents Preface.....................................................................................................................................................................13 An Overview of This Manual .......................................................................................................... 13 Contents ............................................................................................................................................. 13 Related Documents....................
Chapter 5 Controller Transport Service .........................................................................................111 wlsxCtsRequestTable .................................................................................................................... 112 Chapter 6 External Services Interface ...........................................................................................115 wlsxESIServerTable.....................................................................................
Chapter 11 Signal Noise Ratio ...........................................................................................................217 wlsxAPSnrTable ............................................................................................................................. 218 wlsxStaSnrTable............................................................................................................................. 220 wlsxAPSnrBSSIDTable.............................................................
Chapter 16 User....................................................................................................................................425 wlsxTotalNumOfUsers................................................................................................................... 426 wlsxUserTable ................................................................................................................................ 426 wlsxUserSessionTimeTable .................................................
Tables Table 1 Table 2 Table 3 Table 4 Table 5 Table 6 Table 7 Table 8 Table 9 Table 10 Table 11 Table 12 Table 13 Table 14 Table 15 Table 16 Table 17 Table 18 Table 19 Table 20 Table 21 Table 22 Table 23 Table 24 Table 25 Table 26 Table 27 Table 28 Table 29 Table 30 Table 31 Table 32 Table 33 Table 34 Table 35 Table 36 Table 37 Table 38 Table 39 Table 40 Table 41 Table 42 Table 43 Table 44 Conventions..........................................................................................................
Table 45 Table 46 Table 47 Table 48 Table 49 Table 50 Table 51 Table 52 Table 53 Table 54 Table 55 Table 56 Table 57 Table 58 Table 59 Table 60 Table 61 Table 62 Table 63 Table 64 Table 65 Table 66 Table 67 Table 68 Table 69 Table 70 Table 71 Table 72 Table 73 Table 74 Table 75 Table 76 Table 77 Table 78 Table 79 Table 80 Table 81 Table 82 Table 83 Table 84 Table 85 Table 86 Table 87 Table 88 Table 89 Table 90 Table 91 Table 92 Table 93 Table 94 8 | wlsxMobilityHAFARevocationStats.........................
Table 95 Table 96 Table 97 Table 98 Table 99 Table 100 Table 101 Table 102 Table 103 Table 104 Table 105 Table 106 Table 107 Table 108 Table 109 Table 110 Table 111 Table 112 Table 113 Table 114 Table 115 Table 116 Table 117 Table 118 Table 119 Table 120 Table 121 Table 122 Table 123 Table 124 Table 125 Table 126 Table 127 Table 128 User MIB Tables............................................................................................................................. 425 wlsxUserTable OIDs.............
| Dell PowerConnect W-Series ArubaOS 6.
Figures Figure 1 Figure 2 Figure 3 Figure 4 Figure 5 Figure 6 Figure 7 Figure 8 Figure 9 Figure 10 Figure 11 Figure 12 Figure 13 Figure 14 Figure 15 Figure 16 Figure 17 Figure 18 Figure 19 Figure 20 High-Level MIB Hierarchy .............................................................................................................. 20 CLI Interface......................................................................................................................................
| Dell PowerConnect W-Series ArubaOS 6.
Preface An Overview of This Manual This guide is geared toward network administrators and operators responsible for managing the Dell controller. Contents This guide provides information about ArubaOS MIBs. Unless otherwise stated in the following table, each chapter provides information about the hierarchy, OIDs, and descriptions of the statistical information the MIBs provide.
Chapter Contents Chapter 15 Traps Descriptions of traps, information that is delivered when an event occurs. Chapter 16 User Information about users—parties connected to the switch. Chapter 17 User6 Information about IPv6 users—parties connected to the switch that are using IPv6 Chapter 18 Voice Information about Voice over IP—call status and call details. Chapter 19 WLAN Information about wide local area network (WLAN).
Table 2 Frequently Used Acronyms (Continued) Acronym Definition ADP ArubaOS Discovery Protocol AM Air Monitor AP Access Point ARM Adaptive Radio Management BSSID Basic Service Set Identifier CA Certificate Authority CAC Call Admission Control CHAP Challenge Handshake Authentication Protocol CLI Command Line Interface CRL Certificate Revocation List CSA Channel Switch Announcement CSR Certificate Signing Request CW Contention Window DA Destination Address DES Data Encryption St
Table 2 Frequently Used Acronyms (Continued) 16 | Preface Acronym Definition IV Initialization Vectors kB Kilobyte LAN Local Area Network LDAP Lightweight Directory Access Protocol LI Listening Interval MAC Media Access Control MB Megabyte MCHAP Microsoft Challenge Handshake Authentication Protocol MIB Management Information Base NAS Network Address Server NAT Network Address Translation NIC Network Interface Card NTP Network Time Protocol OFDM Orthogonal Frequency Division Mu
Table 2 Frequently Used Acronyms (Continued) Acronym Definition TLS Transport Layer Security ToS Type of Service TSPEC Traffic Specification VLAN Virtual Local Area Network VoIP Voice over IP VPN Virtual Private Network VRRP Virtual Router Redundancy Protocol VSA Vendor Specific Attributes WEP Wired Equivalent Protocol WINS Windows Internet Naming Service WLAN Wireless Local Area Network WMM Wireless MultiMedia / Wi-Fi Multimedia WMS WLAN Management System WPA Wi-Fi Protected Ac
| Preface Dell PowerConnect W-Series ArubaOS 6.
Chapter 1 MIBs Overview This chapter provides an overview of the ArubaOS Enterprise MIBs in the following sections: z MIBs z SNMP z Traps MIBs A Management Information Base (MIB) is a virtual database that contains information that is used for network management. Each managed device contains MIBs that define the properties of that device.
Figure 1 High-Level MIB Hierarchy IS O (1) 1 OR G (3) 1.3 DOD (6) 1.3.6 Internet (1) 1.3.6.1 Directory (1) Management (2) E xperimental (4) 1.3.6.1.1 1.3.6.1.2 1.3.6.1.3 Private (4) 1.3.6.1.4 E nterprises (1) 1.3.6.1.4.1 Dell (674) Aruba (14823) 1.3.6.1.4.1.674 1.3.6.1.4.1.14823 MIB is one of the elements of Simple Network Management Protocol (SNMP), which is used to manage network devices.
z MIBs are used for communication between the Managers and the Agents. The OIDs of the MIBs enable the Managers and Agents to communicate specific data requests and data returns. z To ensure functionality with SNMP, MIB objects must be defined with the proper keywords, as shown in Table 4. ArubaOS Enterprise MIBs support SNMPv1, SNMPv2, and SNMPv3. Table 4 MIB Keywords Keyword Description Sequence The sequence of objects of the MIB.
z Terminal Server Function The terminal server function enables connection to remote-site serial devices. For example, device connection to serial ports enables telnet access via LAN. ArubaOS traps are described in the following chapter and sections.
Chapter 2 Using MIBs This chapter provides information on and examples of using MIBs. z Downloading MIB Files z Monitoring WLAN Health z Reading MIB Files z SNMP File z HP OpenView z MIB Limitations Downloading MIB Files The most recent Dell MIB files are available for registered customers at: http://www.support.dell.com For assistance to set up an account and access files, please contact customer service. See “Contacting Support” on page 17.
Figure 3 shows how information may be obtained through a graphical user interface ( GUI). The user interface and the available features vary by application. Figure 3 Graphical User Interface WLAN Health Information This sections lists frequently used MIBs for system health checks. Examples of executing a command via CLI are also provided. Health check information can be acquired through other MIB browsers, as described in “MIB Browsers” on page 23. .
z Frame Low-Speed Rate per AP BSSID z SNR of Wireless Devices per AP z Frame Receive Error Rate per AP BSSID z SNR of APs Number of Current Authentications per AP wlsxSwitchUserTable .1.3.6.1.4.1.14823.2.2.1.1.2.1 snmpwalk -v 2c -m ALL -c .1.3.6.1.4.1.14823.2.2.1.1.2.1 | grep -c Number of Current APs per Controller wlsxSwitchTotalNumAccessPoints .1.3.6.1.4.1.14823.2.2.1.1.3.
AP Information from Master Controller wlsxSwitchGlobalAPTable .1.3.6.1.4.1.14823.2.2.1.1.3.4 The following command retrieves the BSSIDs and local controller IP of each AP. snmpwalk -v 2c -m ALL -c .1.3.6.1.4.1.14823.2.2.1.1.3.4 Information from Any AP wlsrConfigTable .1.3.6.1.4.1.14823.2.3.1.1.1.
Frame Receive Errors per AP Channel This information is available from any Dell controller. apChannelFrameReceiveErrorRate .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7 snmpwalk -v 2c -c .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.7 | grep "" Total Current Channel Bandwidth (kbps) per AP apChannelBwRate .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.2 snmpwalk -v 2c -c .1.3.6.1.4.1.14823.2.2.1.1.3.5.1.
Free Memory sysXMemoryFree .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4 snmpget -v 2c -m ALL -c .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4.1 SNR of Wireless Devices per AP staSignalToNoiseRatio .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7 snmpwalk -v 2c -c .1.3.6.1.4.1.14823.2.2.1.1.2.2.1.7 | grep "" SNR of APs apSignalToNoiseRatio .1.3.6.1.4.1.14823.2.2.1.1.3.3.1.
TAddress, TimeInterval, RowStatus, StorageType, TestAndIncr, MacAddress, TruthValue FROM SNMPv2-TC OBJECT-GROUP FROM SNMPv2-CONF Inheritance This section shows the vendor of the MIB and the inheritance, and provides an overall description. A significant part of inheritance is the OID. The entire OID is not listed for each MIB object—instead, the parent of the object is shown. The tree for the CTS MIB is illustrated in Figure 4 on page 32. The OID can be determined from the parent object as follows.
MIB Modules MIB objects can be placed in logical groups, Group and Table. One MIB file can consist of multiple groups. A group typically contains at least one table. The table lists the MIB objects that contain the information that is exchanged. The first object of a table is an Entry. The keyword SEQUENCE lists the objects of the table that contain device information.
DESCRIPTION " CTS transport index 0 - Config Sync 1 - Counters Sync 2 - RF Plan Sync " ::= { wlsxCtsRequestEntry 1 } wlsxCtsOpcode OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUScurrent DESCRIPTION " CTS operation opcode " ::= { wlsxCtsRequestEntry 2 } wlsxCtsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUScurrent DESCRIPTION " CTS row status " ::= { wlsxCtsRequestEntry 6 } Closing Line Following is the closing line—the end of the MIBs file.
OID Flow Chart Figure 4 illustrates the tree of the CTS MIB, relative to the Dell MIB. Figure 4 CTS OIDs Relative to Dell 1.3.6.1.4.1.14823 Aruba Aruba Enterprise MIB Modules 1.3.6.1.4.1.14823.2 Switch 1.3.6.1.4.1.14823.2.2 1.3.6.1.4.1.14823.2.2.1 wlsx MIB Modules wlsx CTS 1.3.6.1.4.1.14823.2.2.1.11 wlsx CTS Op Group wlsx CTS Request Table 1.3.6.1.4.1.14823.2.2.1.11.1 1.3.6.1.4.1.14823.2.2.1.11.1.1 SNMP File The snmp.h file lists the OIDs of all MIBs. Following are sections from snmp.
{ "wlsxEnterpriseMibModules", HASHNEXT("1.3.6.1.4.1.14823.2.2.1") }, The following rows list the CTS MIB OIDs. { "wlsxCtsMIB", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11") }, { "wlsxCtsOpGroup", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11.1") }, { "wlsxCtsRequestTable", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11.1.1") }, { "wlsxCtsRequestEntry", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11.1.1.1") }, { "wlsxCtsIndex", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.11.1.1.1.1")}, { "wlsxCtsOpcode", HASHNEXT("1.3.6.1.4.1.14823.2.2.1.
| Using MIBs Dell PowerConnect W-Series ArubaOS 6.
Chapter 3 AP and AM Note: All MIB tables and MIB OIDs in this chapter were deprecated in ArubaOS 3.0 and are no longer supported. The AP and AM module provides information about access points and air monitors. The access point (AP) is a device or an application that connects the wireless client to a local area network (LAN). APs continually poll the network and report information to the controllers.
Figure 5 Access Point Air Module Hierarchy 1.3.6.1.4.1.14823 Aruba Aruba Ap 1.3.6.1.4.1.14823.2.3 wisr E nterprise Mib Modules wisr MIB 1.3.6.1.4.1.14823.2.3.1 1.3.6.1.4.1.14823.2.3.1.1 1.3.6.1.4.1.14823.2.3.1.1.100 wisr Traps Group 1.3.6.1.4.1.14823.2.3.1.1.100.100 wisr Trap Objects Group 1.3.6.1.4.1.14823.2.3.1.1.1 wisr C onfig Group wisr C onfig Table 1.3.6.1.4.1.14823.2.3.1.1.1.1 wisr S tats Group 1.3.6.1.4.1.14823.2.3.1.1.3 1.3.6.1.4.1.14823.2.3.1.1.3.
wlsrEnterpriseMibModules The AP MIB contains several tables, which are listed and summarized in Table 6. The objects of each table are described in the following sections. Table 6 AP Tables Table Description wlsrConfigTable This table lists the configuration data of an access point. Each row in the table represents a WiFi interface. wlsrChannelStatsTable This table lists channel statistics. wlsrChannelRateStatsTable This table lists channel statistics that are sorted per data rate.
Table 7 wlsrConfigTable OIDs (Continued) Object Object ID wlsrSupportedRates 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.12 wlsrConfigEntry 12 wlsrDTIMPeriod 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.13 wlsrConfigEntry 13 wlsrLMSAddress 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.14 wlsrConfigEntry 14 wlsrEncryption 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.15 wlsrConfigEntry 15 wlsrStatus 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.17 wlsrConfigEntry 17 wlsrAgeout 1.3.6.1.4.1.14823.2.3.1.1.1.1.1.18 wlsrConfigEntry 18 wlsrMTU 1.3.6.1.4.1.
wlsrESSID Syntax DisplayString (Size(0..64)) Max-Access read-only Status deprecated Description ESSID of the WiFi Interface. wlsrMode Syntax Integer master(1) adhoc(2) monitor(3) Max-Access read-only Status deprecated Description Mode of the access point. z Master indicates that we are operating as access point. z Monitor indicates that the access point is an air monitor. wlsrCurrentChannel Syntax Integer (1..
wlsrRTSThreshold Syntax Integer (0..2347) Max-Access read-only Status deprecated Description This attribute shall indicate the number of octets in an MPDU, below which an RTS/CTS handshake shall not be performed. wlsrRetryLimit Syntax Integer (1..
wlsrLoadBalance Syntax Integer enable(1) disable(2) Max-Access read-only Status deprecated Description This attribute indicates if load balancing is enabled or disabled.
wlsrLMSAddress Syntax IpAddress Max-Access read-only Status deprecated Description The IP Address of the local switch that the access point is connected to. wlsrEncryption Syntax Bits unused0(0) unused1(1) unused2(2) unused3(3) unused4(4) unused5(5) unused6(6) xSec(7) wpa2PreAuth(8) aes8021x(9) aesPSK(10) dynamicTkip(11) staticTkip(12) dynamicWep(13) staticWep(14) disabled(15) Max-Access read-only Status deprecated Description The encryption type of the WiFi interface.
wlsrMTU Syntax Integer (0..2347) Max-Access read-only Status deprecated Description The MTU of the WiFi Interface. wlsrLocation Syntax DisplayString (Size(0..32)) Max-Access read-only Status deprecated Description The location of the access point in Building.Floor.location format. wlsrHideSSID Syntax TruthValue Max-Access read-only Status deprecated Description This attribute indicates if SSID is hidden or not.
wlsrCardType Syntax Integer noCard(1) intersil(2) atherosA(3) atherosBG(4) atherosABG(5) ar5212A(10) ar5212BG(11) ar5212ABG(12) Max-Access read-only Status deprecated Description Indicates the type of the radio card. wlsrRegDomain Syntax Integer32 Max-Access read-only Status deprecated Description This object represents the configured regulatory domain of which country this AP will adhere to. See Table 8.
wlsrCountryCode Syntax DisplayString (Size(0..64)) Max-Access read-only Status deprecated Description This object represents the configured country code. wlsrTxRates Syntax Bits {unused0(0) unused1(1) unused2(2) unused3(3) rate54Mbps(4) rate48Mbps(5) rate36Mbps(6) rate24Mbps(7) rate18Mbps(8) rate12Mbps(9) rate9Mbps(10) rate6Mbps(11) rate11Mbps(12) rate5Mbps(13) rate2Mbps(14) rate1Mbps(15) Max-Access read-only Status deprecated Description Transmit Bit rates supported by this WiFi interface.
Table 9 wlsrChannelStatsTable OIDs (Continued) Object Object ID wlsrChStatsTotFragmentedPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.7 wlsrChannelStatsEntry 7 wlsrChStatsTotPhyErrPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.8 wlsrChannelStatsEntry 8 wlsrChStatsTotMacErrPkts 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.9 wlsrChannelStatsEntry 9 wlsrChStatsFrameErrorRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.10 wlsrChannelStatsEntry 10 wlsrChStatsFrameRetryRate 1.3.6.1.4.1.14823.2.3.1.1.3.3.1.1.
wlsrChStatsNumStations Syntax Integer32 Max-Access read-only Status deprecated Description The number of stations using this channel. wlsrChStatsTotPkts Syntax Counter32 Max-Access read-only Status deprecated Description The total packets observed on this channel. wlsrChStatsTotBytes Syntax Counter32 Max-Access read-only Status deprecated Description The total bytes observed on this channel.
wlsrChStatsTotPhyErrPkts Syntax Counter32 Max-Access read-only Status deprecated Description The total physical error packets observed on this channel. wlsrChStatsTotMacErrPkts Syntax Counter32 Max-Access read-only Status deprecated Description The total MAC errors packets observed on this channel. wlsrChStatsFrameErrorRate Syntax Integer32 Max-Access read-only Status deprecated Description Frame errors as a percentage of total frames on this channel.
wlsrChStatsFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status deprecated Description Frame non-unicast rate in kbps. wlsrChStatsFrameBandwidthRate Syntax Integer32 Max-Access read-only Status deprecated Description Frame bandwidth rate in kbps. wlsrChStatsFrameFragmentationRate Syntax Integer32 Max-Access read-only Status deprecated Description Frame fragmentation rate in kbps.
Table 10 wlsrChannelRateStatsTable OIDs (Continued) Object Object ID wlsrChStatsTotPktsAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.3 wlsrChannelRateStatsEntry 3 wlsrChStatsTotBytesAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.4 wlsrChannelRateStatsEntry 4 wlsrChStatsTotPktsAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.5 wlsrChannelRateStatsEntry 5 wlsrChStatsTotBytesAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.6 wlsrChannelRateStatsEntry 6 wlsrChStatsTotPktsAt11Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.3.2.1.
wlsrChStatsTotPktsAt1Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of packets observed on this channel at 1 Mbps rate. wlsrChStatsTotBytesAt1Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of bytes observed on this channel at 1 Mbps rate. wlsrChStatsTotPktsAt2Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of packets observed on this channel at 2 Mbps rate.
wlsrChStatsTotBytesAt5Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of bytes observed on this channel at 5 Mbps rate. wlsrChStatsTotPktsAt11Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of packets observed on this channel at 11 Mbps rate.
wlsrChStatsTotPktsAt12Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of packets observed on this channel at 12 Mbps rate. wlsrChStatsTotBytesAt12Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of bytes observed on this channel at 12 Mbps rate.
wlsrChStatsTotBytesAt24Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of bytes observed on this channel at 24 Mbps rate. wlsrChStatsTotPktsAt36Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of packets observed on this channel at 36 Mbps rate.
wlsrChStatsTotPktsAt54Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of packets observed on this channel at 54 Mbps rate. wlsrChStatsTotBytesAt54Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The total number of bytes observed on this channel at 54 Mbps rate.
wlsrChStatsTotDABroadcastPkts Syntax Counter32 Max-Access read-only Status deprecated Description The total number of broadcast packets observed on this channel. wlsrChStatsTotDABroadcastBytes Syntax Counter32 Max-Access read-only Status deprecated Description The total number of broadcast bytes observed on this channel. wlsrChStatsTotDAMulticastPkts Syntax Counter32 Max-Access read-only Status deprecated Description The total number of multicast packets observed on this channel.
wlsrChStatsTotDAUnicastBytes Syntax Counter32 Max-Access read-only Status deprecated Description The total number of unicast bytes observed on this channel. wlsrChannelFrameTypeStatsTable The objects of the wlsr Channel Frame Type Statistics table provide information on package and byte counts per channel, which are sorted by frame type. Table 12 wlsrChannelFrameTypeStatsTable OIDs Object Object ID wlsrChannelFrameTypeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.3.
wlsrChStatsTotMgmtBytes Syntax Counter32 Max-Access read-only Status deprecated Description The total number of management bytes observed on this channel. wlsrChStatsTotCtrlPkts Syntax Counter32 Max-Access read-only Status deprecated Description The total number of control packets observed on this channel. wlsrChStatsTotCtrlBytes Syntax Counter32 Max-Access read-only Status deprecated Description The total number of control bytes observed on this channel.
The objects of the wlsr Channel Packet Size Statistics table provide channel statistics that are grouped by packet size. Table 13 wlsrChannelPktSizeStatsTable OIDs Object OID wlsrChannelPktSizeStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1 wlsrChannelPktSizeStatsTable 1 wlsrChStatsPkts63Bytes 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.1 wlsrChannelPktSizeStatsEntry 1 wlsrChStatsPkts64To127 1.3.6.1.4.1.14823.2.3.1.1.3.3.4.1.2 wlsrChannelPktSizeStatsEntry 2 wlsrChStatsPkts128To255 1.3.6.1.4.1.14823.2.3.1.1.
wlsrChStatsPkts128To255 Syntax Counter32 Max-Access read-only Status deprecated Description The total number of packets that were between 128 and 255 bytes long. wlsrChStatsPkts256To511 Syntax Counter32 Max-Access read-only Status deprecated Description The total number of packets that were between 256 and 511 bytes long. wlsrChStatsPkts512To1023 Syntax Counter32 Max-Access read-only Status deprecated Description The total number of packets that were between 512 and 1023 bytes long.
Table 14 wlsrStaStatsTable OIDs (Continued) Object Object ID wlsrStaRxPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.4 wlsrStaStatsEntry 4 wlsrStaRxBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.5 wlsrStaStatsEntry 5 wlsrStaTxRetryPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.6 wlsrStaStatsEntry 6 wlsrStaRxRetryPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.7 wlsrStaStatsEntry 7 wlsrStaTxFragmentedPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.8 wlsrStaStatsEntry 8 wlsrStaRxFragmentedPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.1.1.
wlsrStaAddress Syntax MacAddress Max-Access not-accessible Status deprecated Description The MAC Address of the station connected to this access point. wlsrStaTxPkts Syntax Counter32 Max-Access read-only Status deprecated Description The total packets transmitted to the station. wlsrStaTxBytes Syntax Counter32 Max-Access read-only Status deprecated Description The total bytes transmitted to the station.
wlsrStaTxRetryPkts Syntax Counter32 Max-Access read-only Status deprecated Description The retry packets transmitted by the station wlsrStaRxRetryPkts Syntax Counter32 Max-Access read-only Status deprecated Description The retry packets received from the station. wlsrStaTxFragmentedPkts Syntax Counter32 Max-Access read-only Status deprecated Description The fragmented packets transmitted by the station.
wlsrStaTxTotSignal Syntax Integer32 Max-Access read-only Status deprecated Description The attribute indicates the total transmitted signal computed for this station. wlsrStaTxSignalPkts Syntax Counter32 Max-Access read-only Status deprecated Description The total signal packets transmitted by this station. wlsrStaTxCurSignal Syntax Integer32 Max-Access read-only Status deprecated Description This attribute indicate the station’s curent transmit signal strength.
wlsrStaRxNoisePkts Syntax Counter32 Max-Access read-only Status deprecated Description Received noise. wlsrStaRxCurrentNoise Syntax Integer32 Max-Access read-only Status deprecated Description Current noise. wlsrStaRxHighNoise Syntax Integer32 Max-Access read-only Status deprecated Description High noise. wlsrStaRxLowNoise Syntax Integer32 Max-Access read-only Status deprecated Description Low noise.
wlsrStaFrameLowSpeedRate Syntax Integer32 Max-Access read-only Status deprecated Description Station frame low speed error rate in kbps. wlsrStaFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status deprecated Description Station frame non-unicast rate in kbps. wlsrStaFrameRetryErrorRate Syntax Integer32 Max-Access read-only Status deprecated Description Station frame retry error rate in kbps.
wlsrStaFrameHighBandwidthRate Syntax Integer32 Max-Access read-only Status deprecated Description Station frame high bandwidth rate in kbps. wlsrStaRateStatsTable The objects of the wlsr Station Rate Statistics table provide information on channel packet and byte counts per channel. The information is grouped by data transfer rate. Table 15 wlsrStaRateStatsTable OIDs Object Object ID wlsrStaRateStatsEntry 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1 wlsrStaRateStatsTable 1 wlsrStaTxPktsAt1Mbps 1.3.6.1.
Table 15 wlsrStaRateStatsTable OIDs (Continued) Object Object ID wlsrStaRxBytesAt1Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.24 wlsrStaRateStatsEntry 24 wlsrStaRxPktsAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.25 wlsrStaRateStatsEntry 25 wlsrStaRxBytesAt2Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.26 wlsrStaRateStatsEntry 26 wlsrStaRxPktsAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.27 wlsrStaRateStatsEntry 27 wlsrStaRxBytesAt5Mbps 1.3.6.1.4.1.14823.2.3.1.1.3.4.2.1.
wlsrStaTxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted by the station at 1 Mbps rate. wlsrStaTxBytesAt1Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets transmitted by the station at 1 Mbps rate. wlsrStaTxPktsAt2Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted by the station at 2 Mbps rate.
wlsrStaTxBytesAt5Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets transmitted by the station at 5 Mbps rate. wlsrStaTxPktsAt11Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted by the station at 11 Mbps rate. wlsrStaTxBytesAt11Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets transmitted by the station at 11 Mbps rate.
wlsrStaTxPktsAt12Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted by the station at 12 Mbps rate. wlsrStaTxBytesAt12Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets transmitted by the station at 12 Mbps rate. wlsrStaTxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted by the station at 18 Mbps rate.
wlsrStaTxBytesAt24Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets transmitted by the station at 24 Mbps rate. wlsrStaTxPktsAt36Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted by the station at 36 Mbps rate. wlsrStaTxBytesAt36Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets transmitted by the station at 36 Mbps rate.
wlsrStaTxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted by the station at 54 Mbps rate. wlsrStaTxBytesAt54Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets transmitted by the station at 54 Mbps rate. wlsrStaRxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received by the station at 1 Mbps rate.
wlsrStaRxBytesAt2Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets received by the station at 2 Mbps rate. wlsrStaRxPktsAt5Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received by the station at 5 Mbps rate. wlsrStaRxBytesAt5Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets received by the station at 5 Mbps rate.
wlsrStaRxPktsAt6Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received by the station at 6 Mbps rate. wlsrStaRxBytesAt6Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets received by the station at 6 Mbps rate. wlsrStaRxPktsAt12Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received by the station at 12 Mbps rate.
wlsrStaRxBytesAt18Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets received by the station at 18 Mbps rate. wlsrStaRxPktsAt24Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received by the station at 24 Mbps rate. wlsrStaRxBytesAt24Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets received by the station at 24 Mbps rate.
wlsrStaRxPktsAt48Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received by the station at 48 Mbps rate. wlsrStaRxBytesAt48Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of octets received by the station at 48 Mbps rate. wlsrStaRxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received by the station at 54 Mbps rate.
Table 16 wlsrStaDATypeStatsTable OIDs (Continued) Object OIDs wlsrStaTxDAMulticastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.4 wlsrStaDATypeStatsEntry 4 wlsrStaTxDAUnicastPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.5 wlsrStaDATypeStatsEntry 5 wlsrStaTxDAUnicastBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.3.1.6 wlsrStaDATypeStatsEntry 6 wlsrStaDATypeStatsEntry Syntax wlsrStaDATypeStatsEntry Max-Access not-accessible Status deprecated Description Station statistics based on the destination address.
wlsrStaTxDAMulticastBytes Syntax Counter32 Max-Access read-only Status deprecated Description The number of multicast bytes transmitted by this station. wlsrStaTxDAUnicastPkts Syntax Counter32 Max-Access read-only Status deprecated Description The total of unicast packets transmitted by this station. wlsrStaTxDAUnicastBytes Syntax Counter32 Max-Access read-only Status deprecated Description The total of unicast bytes transmitted by this station.
Table 17 wlsrStaFrameTypeStatsTable OIDs (Continued) Object Object ID wlsrStaRxCtrlBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.10 wlsrStaFrameTypeStatsEntry 10 wlsStaRxDataPkts 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.11 wlsrStaFrameTypeStatsEntry 11 wlsrStaRxDataBytes 1.3.6.1.4.1.14823.2.3.1.1.3.4.4.1.12 wlsrStaFrameTypeStatsEntry 12 wlsrStaFrameTypeStatsEntry Syntax wlsrStaFrameTypeStatsEntry Max-Access not-accessible Status deprecated Description Station frame type statistics entry.
wlsrStaTxCtrlBytes Syntax Counter32 Max-Access read-only Status deprecated Description The transmitted control bytes from a station. wlsrStaTxDataPkts Syntax Counter32 Max-Access read-only Status deprecated Description The transmitted data packets from a station. wlsrStaTxDataBytes Syntax Counter32 Max-Access read-only Status deprecated Description The transmitted data bytes observed on this channel.
wlsrStaRxCtrlPkts Syntax Counter32 Max-Access read-only Status deprecated Description The number of received control packets at a station. wlsrStaRxCtrlBytes Syntax Counter32 Max-Access read-only Status deprecated Description The number of received control bytes at a station. wlsStaRxDataPkts Syntax Counter32 Max-Access read-only Status deprecated Description The number of received data packets at a station.
Table 18 wlsrStaPktSizeStatsTable OIDs (Continued) Object Object ID wlsrStaTxPkts128To255 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.3 wlsrChannelPktSizeStatsEntry 3 wlsrStaTxPkts256To511 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.4 wlsrChannelPktSizeStatsEntry 4 wlsrStaTxPkts512To1023 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.5 wlsrChannelPktSizeStatsEntry 5 wlsrStaTxPkts1024To1518 1.3.6.1.4.1.14823.2.3.1.1.3.3.5.1.
wlsrStaTxPkts256To511 Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted by the station that were between 256 and and 511 bytes long. wlsrStaTxPkts512To1023 Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets transmitted by the station that were between 512 and 1023 bytes long.
wlsrStaRxPkts128To255 Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received by the station that were between 128 and 255 bytes long. wlsrStaRxPkts256To511 Syntax Counter32 Max-Access read-only Status deprecated Description The number of packets received by the station that were between 256 and 511 bytes long.
Table 19 wlsrAirMonitorApListTable OIDs (Continued) Object Object ID wlsrAmChannel 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.3 wlsrAirMonitorApListEntry 3 wlsrAmPhysicalType 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.4 wlsrAirMonitorApListEntry 4 wlsrAmAccessPointType 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.5 wlsrAirMonitorApListEntry 5 wlsrAmRAPType 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.6 wlsrAirMonitorApListEntry 6 wlsrAmRSSI 1.3.6.1.4.1.14823.2.3.1.1.4.1.1.7 wlsrAirMonitorApListEntry 7 wlsrAmMonitoredTime 1.3.6.1.4.1.
wlsrAmChannel Syntax Integer(1..165) Max-Access read-only Status deprecated Description The channel on which this access point is operating. wlsrAmPhysicalType Syntax Integer dot11b(1) dot11a(2) dot11g(3) Max-Access read-only Status deprecated Description The physical layer type. wlsrAmAccessPointType Syntax Integer genericAp(1) softAp(2) ciscoAp(3) Max-Access read-only Status deprecated Description The type of access point.
wlsrAmRSSI Syntax Integer32 Max-Access read-only Status deprecated Description The access point receiver signal strength. wlsrAmMonitoredTime Syntax TimeTicks Max-Access read-only Status deprecated Description Time in ticks since the air monitor is observing this access point. wlsrAmInactivityTime Syntax TimeTicks Max-Access read-only Status deprecated Description Access point inactivity time.
Table 20 wlsrTrapsGroup OIDs (Continued) Object Object ID wlsrTargetApChannel 1.3.6.1.4.1.14823.2.3.1.1.100.100.3 wlsrTrapObjectsGroup 3 wlsrSourceMac 1.3.6.1.4.1.14823.2.3.1.1.100.100.4 wlsrTrapObjectsGroup 4 wlsrNodeMac 1.3.6.1.4.1.14823.2.3.1.1.100.100.5 wlsrTrapObjectsGroup 5 wlsrFrameType 1.3.6.1.4.1.14823.2.3.1.1.100.100.6 wlsrTrapObjectsGroup 6 wlsrAddressType 1.3.6.1.4.1.14823.2.3.1.1.100.100.7 wlsrTrapObjectsGroup 7 wlsrSignatureName 1.3.6.1.4.1.14823.2.3.1.1.100.100.
wlsrTargetApChannel Syntax Integer(1..165) Max-Access read-only Status deprecated Description This object is used in the traps to indicate the channel of the access point for which we are raising the trap. If an air monitor is sending the trap, this will indicate access point. If an access point is sending the trap, it will point to itself.
wlsrAddressType Syntax Integer srcAddress(1) dstAddress(2) bssid(3) Max-Access read-only Status deprecated Description This object is used in the traps to indicate the address type. wlsrSignatureName Syntax Octet String (Size (0..64)) Max-Access read-only Status deprecated Description This object is used in the traps to indicate the signature name.
wlsrTransmitterMac Syntax MacAddress Max-Access read-only Status deprecated Description This object is used in the traps to indicate the MAC address of the transmitter. wlsrRSSI Syntax Integer32 Max-Access read-only Status deprecated Description This object is used in the traps to indicate the signal strength indicator. wlsrRogueInfoURL Syntax DisplayString(Size(0..
Table 21 wlsrTrapsGroup OIDs (Continued) Object Object ID wlsrChannelMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1005 wlsrTrapsGroup 1005 wlsrOUIMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1006 wlsrTrapsGroup 1006 wlsrSSIDMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1007 wlsrTrapsGroup 1007 wlsrShortPreableMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1008 wlsrTrapsGroup 1008 wlsrWPAMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1009 wlsrTrapsGroup 1009 wlsrAdhocNetworkDetected 1.
Table 21 wlsrTrapsGroup OIDs (Continued) Object Object ID wlsrWEPMisconfiguration 1.3.6.1.4.1.14823.2.3.1.1.100.1039 wlsrTrapsGroup 1039 wlsrStaRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1040 wlsrTrapsGroup 1040 wlsrStaWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.1.100.1041 wlsrTrapsGroup 1041 wlsrStaAssociatedToUnsecureAp 1.3.6.1.4.1.14823.2.3.1.1.100.1042 wlsrTrapsGroup 1042 wlsrAdhocNetworkBridgeDetected 1.3.6.1.4.1.14823.2.3.1.1.100.
wlsrChannelMisconfiguration Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status deprecated Description This trap indicates that an Access Point has a bad channel configuration. wlsrOUIMisconfiguration Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status deprecated Description This trap indicates that an Access Point has a bad OUI configuration.
wlsrStaPolicyViolation Objects {wlsrTargetApBSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} Status deprecated Description This trap indicates that a Valid Station policy is violated. wlsrRepeatWEPIVViolation Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status deprecated Description This trap indicates that an AP/AM detected a Repeat WEP-IV violation.
wlsrFrameRetryRateExceeded Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status deprecated Description This trap indicates that an AM/AP located at wlsrLocation is reporting that an AP wlsrTargetApBSSID has exceeded an upper threshold for frame retry rate for AP wlsrTargetApBSSID.
wlsrFrameNonUnicastRateExceeded Objects {wlsrNodeMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrLocation, wlsrCurrentChannel} Status deprecated Description This trap indicates that an AM/AP located at wlsrLocation is reporting that a station wlsrStaAddress has exceeded the non-unicast traffic rate.
wlsrChannelRateAnomaly Objects {wlsrFrameType, wlsrLocation, wlsrCurrentChannel} Status deprecated Description This trap indicates that an AP/AM at wlsrLocation detected frames of type wlsrFrameType on wlsrCurrentChannel which exceeds the configured IDS rate threshold.
wlsrApFloodAttack Objects {wlsrLocation} Status deprecated Description This trap is triggered when the number of spurious AP’s detected by an AP/AM at wlsrLocation exceeds the configured IDS threshold. wlsrAdhocNetwork Objects {wlsrSourceMac, wlsrTargetApBSSID, wlsrTargetApSSID, wlsrRSSI, wlsrLocation} Status deprecated Description This trap indicates that an AP/AM at wlsrLocation detected an ad hoc network. Node wlsrSourceMac is connected to an ad hoc AP wlsrTargetAApBSSID with wlsrTargetApSSID.
wlsrStaRepeatWEPIVViolation Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} Status deprecated Description This trap indicates that an AP/AM detected a repeat WEP-IV violation for a station. wlsrStaWeakWEPIVViolation Objects {wlsrTargetApBSSID, wlsrTargetApSSID, wlsrNodeMac, wlsrLocation, wlsrCurrentChannel} Status deprecated Description This trap indicates that an AP/AM detected a weak WEP-IV violation for a station.
| AP and AM Dell PowerConnect W-Series ArubaOS 6.
Chapter 4 Authentication The Authentication module provides information about the authentication server, as well as entities that are attempting to access the network.Authentication is used to verify the entity that is communicating to a device. Figure 6 shows the architecture of the Auth MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Authentication MIBs are listed in the file aruba-auth.my.
The Authentication MIB consists of several tables, which are listed and summarized in Table 22. The objects of each table are described in the following sections. Table 22 Authentication MIB Tables Group Description wlsxAuthenticationServerTable Contains the users (both wired and wireless) currently connected to the controller. Users are identified by their IP addresses. wlsxPortalServerTable Contains the configured captive portal servers. wlsxLdapServerStateTable Contains the LDAP server state.
wlsxAuthenticationServerEntry Syntax wlsxAuthenticationServerEntry Max-Access not-accessible Status current Description Server entry. Index { authServerName } authServerName Syntax DisplayString(SIZE(0..32)) Max-Access not-accessible Status current Description The name of the authentication server. authServerType Syntax ArubaAuthServerType Max-Access read-only Status current Description The type of the authentication server.
authServerRetryCount Syntax Integer32 Max-Access read-create Status current Description The configured retry count. authServerTimeOutValue Syntax nteger32 Max-Access read-create Status current Description The configured timeout value. authServerState Syntax ArubaEnableValue Max-Access read-only Status current Description The state of the authentication server.
authServerSuccessfullAuths Syntax Counter32 Max-Access read-only Status current Description The number of times this server responded with success. authServerFailedAuths Syntax Counter32 Max-Access read-only Status current Description The number of times this server responded with failure. authServerTimeouts Syntax Counter32 Max-Access read-only Status current Description The number of times this communication with this server timed out.
authServerUptime Syntax Integer32 Max-Access read-only Status current Description The time since the server went into service with the controller. wlsxPortalServerTable The objects of the wlsx Portal Server table provide information about configured captive portal servers. Table 24 wlsxPortalServerTable OIDs Object Object ID wlsxPortalServerEntry 1.3.6.1.4.1.14823.2.2.1.8.1.2.1 wlsxPortalServerTable 1 portalServerIndex 1.3.6.1.4.1.14823.2.2.1.8.1.2.1.
portalServerHost Syntax DisplayString(SIZE(0..256)) Max-Access read-only Status current Description The IP address of the portal server. portalServerPort Syntax Integer32 Max-Access read-only Status current Description The transport layer port of the portal server. portalServerPage Syntax DisplayString(SIZE(0..256)) Max-Access read-only Status current Description The portal server URL.
wlsxLdapServerStateEntry Syntax wlsxLdapServerStateEntry Max-Access not-accessible Status current Description LDAP Server Entry. Index { authServerName } ldapInitDone Syntax TruthValue Max-Access read-only Status current Description Indicates whether the controller is initialized with the server. ldapAdminBound Syntax Integer no(1) yes(2) inProgress(3) Max-Access read-only Status current Description Indicates whether the controller is bound to the server.
Chapter 5 Controller Transport Service Note: All MIB tables and MIB OIDs in this chapter are deprecated and are no longer supported. This module provides information about the Controller Transport Service. The Controller Transport Service (CTS) is used with the Mobility Manager for synchronizing configuration, database, and data sections. The CTS MIBs are used for triggering the data synchronization event with the MMS, such as config update. CTS is not intended to be used with other applications.
wlsxCtsRequestTable The objects of the wlsx CTS Request Table are used for data synchronization when using MMS. Table 27 wlsxCtsRequestTable OIDs Object Object ID wlsxCtsRequestEntry 1.3.6.1.4.1.14823.2.2.1.11.1.1.1 wlsxCtsRequestTable 1 tablewlsxCtsIndex 1.3.6.1.4.1.14823.2.2.1.11.1.1.1.1 wlsxCtsRequestEntry 1 wlsxCtsOpcode 1.3.6.1.4.1.14823.2.2.1.11.1.1.1.2 wlsxCtsRequestEntry 2 wlsxCtsCookie 1.3.6.1.4.1.14823.2.2.1.11.1.1.1.3 wlsxCtsRequestEntry 3 wlsxCtsURL 1.3.6.1.4.1.14823.2.2.1.11.1.
wlsxCtsRequestEntry Syntax wlsxCtsRequestEntry Max-Access not-accessible Status deprecated Description CTS transport index. History Added in ArubaOS 3.1.0.3. tablewlsxCtsIndex Syntax Integer32 0 Config Sync 1 Counters Sync 2 RF Plan Sync Max-Access not accessible Status deprecated Description CTS transport index. History Added in ArubaOS 3.1.0.3. Updated in ArubaOS 3.2.0.0.
wlsxCtsURL Syntax DisplayString Max-Access read-write Status deprecated Description URL for the config sync operation. History Added in ArubaOS 3.1.0.3. wlsxCtsFlags Syntax Bits wlsxCtsFlagForce(0) wlsxCtsFlagUseCert(1) Max-Access read-write Status deprecated Description Operational flags to be sent via CTS. History Added in ArubaOS 3.1.0.3. wlsxCtsStatus Syntax Row Status Max-Access read-write Status deprecated Description CTS row status. History Added in ArubaOS 3.1.0.3.
Chapter 6 External Services Interface The External Services Interface (ESI) module provides information about the Wireless Management System (WMS) in the Dell controller. ESI is used for redirecting traffic to a virus scanner, context filter, or other third party network appliances. Figure 8 shows the architecture of the ESI MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The ESI MIBs are listed in the file aruba-esi.my.
The objects of the wlsx ESI Server table provide information of the ESI servers that are configured on the controller. Table 29 wlsxESIServerTable OIDs Object Object ID wlsxESIServerEntry 1.3.6.1.4.1.14823.2.2.1.10.1.1.1 wlsxESIServerTable 1 esiServerName 1.3.6.1.4.1.14823.2.2.1.10.1.1.1.1 wlsxESIServerEntry 1 esiServerGroup 1.3.6.1.4.1.14823.2.2.1.10.1.1.1.2 wlsxESIServerEntry 2 esiServerMode 1.3.6.1.4.1.14823.2.2.1.10.1.1.1.3 wlsxESIServerEntry 3 esiServerTrustedIP 1.3.6.1.4.1.14823.2.2.1.
esiServerMode Syntax ArubaESIServerMode Max-Access read-only Status current Description The mode of this server. esiServerTrustedIP Syntax IpAddress Max-Access read-only Status current Description The trusted IP address of this server, or 0.0.0.0 if it is not set. esiServerUntrustedIP Syntax IpAddress Max-Access read-only Status current Description The untrusted IP address of this server, or 0.0.0.0 if it is not set.
esiServerUntrustedSlot Syntax Integer32 Max-Access read-only Status current Description The slot number of the untrusted interface for this server. esiServerUntrustedPort Syntax Integer32 Max-Access read-only Status current Description The port number of the untrusted interface for this server. esiServerStatus Syntax ArubaESIServerStatus Max-Access read-only Status current Description Indicates the status of this ESI server.
Chapter 7 IF External IF External (IF EXT) MIB objects provide system-level information about the Dell controller—physical ports, configured VLANs, the port memberships, and the interfaces that define the VLANs. Figure 9 shows the architecture of the IF EXT MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The IF External MIBs are listed in the file aruba-ifext.my. For information about downloading Aruba MIB files, see “Downloading MIB Files” on page 23.
The objects of the wlsx External Port table define the physical ports of the controller. Table 31 wlsxIfExtPortTable OIDs 120 | IF External Object Object ID wlsxIfExtPortEntry 1.3.6.1.4.1.14823.2.2.1.3.1.1.1 wlsxIfExtPortTable 1 ifExtSlotNumber 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.1 wlsxIfExtPortEntry 1 ifExtPortNumber 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.2 wlsxIfExtPortEntry 2 ifExtPortIfIndex 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.3 wlsxIfExtPortEntry 3 ifExtAdminState 1.3.6.1.4.1.14823.2.2.1.3.1.1.1.
wlsxIfExtPortEntry Syntax wlsxIfExtPortEntry Max-Access not-accessible Status current Description An entry for one processor contained by the controller. Index { ifExtSlotNumber, ifExtPortNumber } ifExtSlotNumber Syntax Integer32 Max-Access not-accessible Status current Description This object represents the physical slot of the interface. ifExtPortNumber Syntax Integer32 Max-Access not-accessible Status current Description This object represents the physical port of the interface.
ifExtOperState Syntax Integer up(1) down(2) testing(3) Max-Access read-only Status current Description The current operational state of the interface. ifExtPoeState Syntax ArubaPoeState Max-Access read-write Status current Description The current state of the power over ethernet capability of the port. ifExtIsTrusted Syntax TruthValue Max-Access read-write Status current Description The object indicates if the port is used in the trusted side of the network or the untrusted side.
ifExtAccessVLANId Syntax ArubaVLANValidRange Max-Access read-write Status current Description The VLAN ID when the port is in access mode. ifExtTrunkNativeVLANId Syntax ArubaVLANValidRange Max-Access read-write Status current Description The native VLAN ID of the Port when the port is in dot1q mode.
ifExtIngressACLName Syntax DisplayString(SIZE(0..64)) Max-Access read-write Status current Description This object represents the ingress ACL name applied to the port. An empty string indicates that ACL is not applied on this port. ifExtEgressACLName Syntax DisplayString(SIZE(0..64)) Max-Access read-write Status current Description This object represents the egress ACL name applied to the port. An empty string indicates that ACL is not applied on this port.
ifExtIsMux Syntax TruthValue Max-Access read-write Status current Description This object indicates if the port is used as a MUX Port. ifExtUserSlotNumber Syntax Integer32 Max-Access read-only Status current Description The user-visible (zero-based) slot number. ifExtUserPortNumber Syntax Integer32 Max-Access read-only Status current Description The user-visible (zero-based) port number.
ifExtPortType Syntax ArubaPortType Max-Access read-only Status current Description The type of the port. ifExtDescr Syntax DisplayString Max-Access read-only Status current Description Port description. wlsxIfExtVLANTable The objects of the wlsx IF External VLAN table provide information about the VLANs of the controller. Table 32 wlsxIfExtVLANTable OIDs Object Object ID wlsxIfExtVLANEntry 1.3.6.1.4.1.14823.2.2.1.3.1.2.1 wlsxIfExtVLANTable 1 ifExtVLANId 1.3.6.1.4.1.14823.2.2.1.3.1.2.
ifExtVLANId Syntax ArubaVLANValidRange Max-Access not-accessible Status current Description This object represents the VLAN ID of the interface. ifExtVLANName Syntax DisplayString(SIZE(0..64)) Max-Access read-create Status current Description Name of the VLAN. ifExtVLANStatus Syntax Row Status Max-Access read-create Status current Description A row status object used to create/modify the row.
wlsxIfExtVLANMemberEntry Syntax wlsxIfExtVLANMemberEntry Max-Access not-accessible Status current Description An entry for one processor contained by the controller. Index { ifExtVLANId, ifIndex } ifExtVLANMemberStatus Syntax Row Status Max-Access read-create Status current Description A row status object used to create/modify and indicate the status row.
wlsxIfExtVLANInterfaceTable The objects of the wlsx IF EXT VLAN Interface table provide information about Layer 3 VLAN interfaces. Table 34 wlsxIfExtVLANInterfaceTable OIDs132 Object Object ID wlsxIfExtVLANInterfaceEntry 1.3.6.1.4.1.14823.2.2.1.3.1.4.1 wlsxIfExtVLANInterfaceTable 1 ifExtVLANInterfaceIfIndex 11.3.6.1.4.1.14823.2.2.1.3.1.4.1.1 wlsxIfExtVLANInterfaceEntry 1 ifExtVLANInterfaceDescription 11.3.6.1.4.1.14823.2.2.1.3.1.4.1.
ifExtVLANInterfaceDescription Syntax DisplayString(SIZE(0..64)) Max-Access read-create Status current Description The description of the VLAN interface. ifExtVLANInterfaceBWContract Syntax DisplayString(SIZE(0..64)) Max-Access read-create Status current Description This object indicates the bandwidth contract on the interface. ifExtVLANInterfaceAdminState Syntax ArubaEnableValue Max-Access read-create Status current Description This object indicates the IP address of the interface.
ifExtVLANInterfaceIpMask Syntax IpAddress Max-Access read-create Status current Description This object indicates the IP mask of the interface. ifExtVLANInterfaceIsLocalArp Syntax ArubaEnableValue Max-Access read-create Status current Description This object indicates if the Local Arp is set on the interface. ifExtVLANInterfaceStatus Syntax Row Status Max-Access read-create Status current Description A row status object used to create/modify and indicate the status row.
ifExtVlanInterfaceIpIgmpSnooping 132 | IF External Syntax ArubaEnableValue Max-Access read-create Status current Description This object indicates if the IP IGMP snooping is set on the interface. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
Chapter 8 Mesh The Mesh module provides information about Mesh portal and topology in the Dell controller. Mesh is a new addition to the ArubaOS MIB family. Figure 10 shows the architecture of the Mesh MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Mesh MIBs are listed in the file aruba-mesh.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Figure 10 Mesh Hierarchy 1.3.6.1.4.1.14823 Aruba Aruba Enterprise MIB Modules 1.
wlsxMeshNodeTotal Syntax Unsigned32 Max-Access read-only Status current Description Total Number of mesh nodes in the controller. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeTable The objects of the wlsx Mesh Node table provide information about the Mesh Node. Table 36 Mesh Node Table OIDs Object Object ID wlsxMeshNodeEntry 1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1 wlsxMeshNodeTable 1 wlsxMeshRole 1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.1 wlsxMeshNodeEntry 1 wlsxMeshNodeParent 1.3.6.1.4.1.14823.2.
wlsxMeshRole Syntax ArubaMeshRole MAX-ACCES read-only Status current Description Mesh role. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeParent Syntax MacAddress Max-Access read-only Status current Description Mesh node parent. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeChildrenCount Syntax Unsigned32 Max-Access read-only Status current Description Mesh node children count. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeCluster Syntax DisplayString(SIZE(0..
wlsxMeshNodeRfBand Syntax ArubaPhyType Max-Access read-only Status current Description Mesh node RF band. History Added in ArubaOS 3.2.0.0. wlsxMeshNodePathCost Syntax Integer32 Max-Access read-only Status current Description Mesh topology path cost. History Added in ArubaOS 3.2.0.0. wlsxMeshNodeNodeCost Syntax Integer32 Max-Access read-only Status current Description Mesh topology node cost. History Added in ArubaOS 3.2.0.0.
wlsxMeshNodeHopCount Syntax Integer32 Max-Access read-only Status current Description Mesh topology hop cost. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
| Mesh Dell PowerConnect W-Series ArubaOS 6.
Chapter 9 Mobility The Mobility module provides information about the subsystem in the Dell controller, such as the home agent (HA) or foreign agent (FA) of a roaming agent. Figure 11 shows the architecture of the Mobility MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Mobility MIBs are listed in the file aruba-mobility.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Figure 11 Mobility Hierarchy 1.3.6.1.4.1.
The Mobility MIB contains the following objects. The objects of each table are described in the following sections. Table 37 Mobility Objects Table Description wlsxMobilityDomainTable This table lists all mobility domains configured on the controller. wlsxMobilityHostTable This table lists all mobile hosts on the controller. wlsxMobilityProxyStatsGroup This group contains proxy state machine statistics—the number of packets handled by the MobileIP Proxy state machine.
mobilityDomainName Syntax DisplayString Max-Access not-accessible Status current Description The name of the active mobility domain(s) this controller belongs to. History Update in ArubaOS 3.1—description. mobilityDomainIsExclusive Syntax ArubaEnableValue Max-Access read-only Status deprecated Description Indicates whether this mobility domain is exclusive or not. History Deprecated in ArubaOS 3.1.0.0.
wlsxMobilityHomeAgentEntry Syntax wlsxMobilityHomeAgentEntry Max-Access not-accessible Status current Description Mobility home agent entry. Index { mobilityHomeAgentSubnet, mobilityHomeAgentMask, mobiltityHomeAgentIp } mobilityHomeAgentSubnet Syntax IpAddress Max-Access read-only Status current Description Subnet of the home agent. mobilityHomeAgentMask Syntax IpAddress Max-Access read-only Status current Description Subnet mask of the home agent.
wlsxMobilityHostTable The objects of the wlsx Mobility Host table provide information about the mobile hosts on the controller. Table 40 wlsxMobilityHostTable OIDs Object Object ID wlsxMobilityHostEntry 1.3.6.1.4.1.14823.2.2.1.9.1.4.1 wlsxMobilityHostTable 1 mobilityHostMac 1.3.6.1.4.1.14823.2.2.1.9.1.4.1.1 wlsxMobilityHostEntry 1 mobilityHostIp 1.3.6.1.4.1.14823.2.2.1.9.1.4.1.2 wlsxMobilityHostEntry 2 mobilityHostStatus 1.3.6.1.4.1.14823.2.2.1.9.1.4.1.
mobilityHostStatus Syntax DisplayString Max-Access read-only Status current Description Roaming status of the mobile host. mobilityHostServiceTime Syntax Integer32 Max-Access read-only Status current Description The time (seconds) mobility service is provided to the mobile host. mobilityHostHomeVLAN Syntax Integer32 Max-Access read-only Status current Description Home VLAN of the mobile host.
mobilityHostDhcpInfo Syntax DisplayString Max-Access read-only Status current Description DHCP details of the mobile host. wlsxMobilityProxyStatsGroup The objects of this group provide information of the number of packets MobileIP Proxy state machine handled. Table 41 wlsxMobilityProxyStats OIDs Object Object ID mobilityProxyPktRx 1.3.6.1.4.1.14823.2.2.1.9.2.1 wlsxMobilityProxyStatsGroup 1 mobilityProxyPktHandled 1.3.6.1.4.1.14823.2.2.1.9.2.
mobilityProxyPktFwd Syntax Counter32 Max-Access read-only Status current Description The number of packets the proxy state machine forwarded back to data path. mobilityProxyPktDrop Syntax Counter32 Max-Access read-only Status current Description The number of packets the proxy state machine dropped. mobilityProxyBusy Syntax Counter32 Max-Access read-only Status current Description The number of mobility events the proxy state machine ignored because it was busy.
mobilityProxyClientEssidChg Syntax Counter32 Max-Access read-only Status current Description The number of times mobility detected client ESSID change. wlsxMobilityProxyDHCPStats Group The objects of this group provide information of the number of DHCP packages the Mobile IP state machine handles. Table 42 wlsxMobilityProxyDHCPStats Object Object ID mobilityProxyDhcpBootpRx 1.3.6.1.4.1.14823.2.2.1.9.3.1 wlsxMobilityProxyDHCPStatsGroup 1 mobilityProxyDhcpPktProc 1.3.6.1.4.1.14823.2.2.1.9.3.
mobilityProxyDhcpPktFwd Syntax Counter32 Max-Access read-only Status current Description The number of DHCP messages forwarded. mobilityProxyDhcpPktDrop Syntax Counter32 Max-Access read-only Status current Description The number of DHCP messages dropped. mobilityProxyDHCPNak Syntax Counter32 Max-Access read-only Status current Description The number of DHCP NAK received from the server.
mobilityProxyDHCPNoHomeVLAN Syntax Counter32 Max-Access read-only Status current Description The number of DHCP-requested IP for which home VLAN does not exist. mobilityProxyDHCPUnexpFrame Syntax Counter32 Max-Access read-only Status current Description The number of unexpected DHCP frames received from client. mobilityProxyDHCPUnexpRemote Syntax Counter32 Max-Access read-only Status current Description The number of unexpected DHCP frames received from remote HA/FA.
Table 43 wlsxMobilityHAStats OIDs (Continued) Object Object ID mobilityHAMalform 1.3.6.1.4.1.14823.2.2.1.9.4.11 wlsxMobilityHAStatsGroup 11 mobilityHATooManyBnd 1.3.6.1.4.1.14823.2.2.1.9.4.12 wlsxMobilityHAStatsGroup 12 mobilityHABndExpire 1.3.6.1.4.1.14823.2.2.1.9.4.13 wlsxMobilityHAStatsGroup 13 mobilityHARxRRQ Syntax Counter32 Max-Access read-only Status current Description The number of registration requests received by HA.
mobilityHARRQIgnore Syntax Counter32 Max-Access read-only Status current Description The number of registration requests ignored by HA. mobilityHARRQAdminDeny Syntax Counter32 Max-Access read-only Status current Description The number of registration requests denied for administrative reasons by HA. mobilityHARRQNoResource Syntax Counter32 Max-Access read-only Status current Description The number of registration requests denied due to lack of resources by HA.
mobilityHABadID Syntax Counter32 Max-Access read-only Status current Description The number of mobile IP messages rejected by HA due to bad identification. mobilityHAMalform Syntax Counter32 Max-Access read-only Status current Description The number of mobile IP messages rejected by HA due to being poorly formed. mobilityHATooManyBnd Syntax Counter32 Max-Access read-only Status current Description The number of registration requests rejected due to too many bindings at HA.
Table 44 wlsxMobilityFAStats OIDs (Continued) Object Object ID mobilityFARRQReject 1.3.6.1.4.1.14823.2.2.1.9.5.4 wlsxMobilityFAStatsGroup 4 mobilityMNHAauthFAIL 1.3.6.1.4.1.14823.2.2.1.9.5.5 wlsxMobilityFAStatsGroup 5 mobilityFAHAauthFAIL 1.3.6.1.4.1.14823.2.2.1.9.5.6 wlsxMobilityFAStatsGroup 6 mobilityFABadID 1.3.6.1.4.1.14823.2.2.1.9.5.7 wlsxMobilityFAStatsGroup 7 mobilityFAMalfor 1.3.6.1.4.1.14823.2.2.1.9.5.
mobilityMNHAauthFAIL Syntax Counter32 Max-Access read-only Status current Description The number of times MN-HA authentication failed. mobilityFAHAauthFAIL Syntax Counter32 Max-Access read-only Status current Description The number of FA-HA authentications that failed. mobilityFABadID Syntax Counter32 Max-Access read-only Status current Description The number of mobile IP messages rejected by FA due to bad identification.
Table 45 wlsxMobilityHAFARevocationStats Object Object ID mobilitySentRRVAck 1.3.6.1.4.1.14823.2.2.1.9.6.4 wlsxMobilityHAFARevocationStatsGroup 4 mobilityRRVRQIgnore 1.3.6.1.4.1.14823.2.2.1.9.6.5 wlsxMobilityHAFARevocationStatsGroup 5 mobilityRRVAckIgnore 1.3.6.1.4.1.14823.2.2.1.9.6.6 wlsxMobilityHAFARevocationStatsGroup 6 mobilitySentRRVRQ Syntax Counter32 Max-Access read-only Status current Description The number of registration revocation requests sent.
mobilityRRVRQIgnore Syntax Counter32 Max-Access read-only Status current Description The number of registration revocation requests ignored. mobilityRRVAckIgnore 156 | Mobility Syntax Counter32 Max-Access read-only Status current Description The number of registrations that revocation ACK ignored. Dell PowerConnect W-Series ArubaOS 6.
Chapter 10 Monitor The Monitor module provides information about network traffic. Monitoring access points can be used to observe network traffic, such as the number of packets transferred at a specific rate, the number of errors per access point, and so on. Figure 12 shows the architecture of the Monitor MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Monitor MIBs are listed in the file aruba-mon.my.
Figure 12 Monitor Hierarchy 1.3.6.1.4.1.14823 Aruba wlsx Enterprise Mib Modules 1.3.6.1.4.1.14823.2 Switch 1.3.6.1.4.1.14823.2.2 wlsx Enterprise MIB Modules 1.3.6.1.4.1.14823.2.2.1 wlsx Mon MIB 1.3.6.1.4.1.14823.2.2.1.6 wlsx Mon Stats Gr oup 1.3.6.1.4.1.14823.2.2.1.6.6 1.3.6.1.4.1.14823.2.2.1.6.6.1 wlsx Mon Access Point Stats Group wlsx Mon AP Stats Table 1.3.6.1.4.1.14823.2.2.1.6.6.1.1 wlsx Mon AP Rate Stats Table 1.3.6.1.4.1.14823.2.2.1.6.6.1.2 wlsx Mon AP DAT Type Stats Table 1.3.6.1.4.
Table 46 Monitor MIB Tables (Continued) Table Description wlsxMonAPDATypeStatsTable This table lists the per BSSID packet and byte counts that are sorted by the destination address. wlsxMonAPFrameTypeStatsTable This table lists the per BSSID packet and byte counts that are sorted by frame type. wlsxMonAPPktSizeStatsTable This table lists the per BSSID packet and byte counts that are sorted by packet size.
Table 47 wlsxMonApStatsTable OIDs (Continued) Object Object ID monAPRxBytes 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.11 wlsxMonAPStatsEntry 11 monAPTxDeauthentications 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.12 wlsxMonAPStatsEntry 12 monAPRxDeauthentications 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.13 wlsxMonAPStatsEntry 13 monAPChannelThroughput 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.14 wlsxMonAPStatsEntry 14 monAPFrameRetryRate 1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.15 wlsxMonAPStatsEntry 15 monAPFrameLowSpeedRate 1.
monRadioNumber Syntax Integer32 Max-Access not-accessible Status current Description The radio number of the air monitor that is monitoring the access point. monitoredApBSSID Syntax MacAddress Max-Access not-accessible Status current Description The BSSID of the access point being monitored. monPhyType Syntax ArubaPhyType Max-Access read-only Status current Description The PHY type of the monitored access point.
monAPTxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by this monitored access point. History Update in ArubaOS 3.1—description. monAPTxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes transmitted by this monitored access point. History Update in ArubaOS 3.1—description.
monAPTxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentications transmitted by this monitored access point. History Update in ArubaOS 3.1—description. monAPRxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentications received by this monitored access point. History Update in ArubaOS 3.1—description.
monAPFrameLowSpeedRate Syntax Integer32 Max-Access read-only Status current Description The number of low data rate (<= 18 Mbps for A/G bands and <=2 Mbps for B band) packets as a percentage of the total packets transmitted and received by this monitored access point. History Update in ArubaOS 3.1—description. monAPFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description The multicast rate on this monitored access point. History Update in ArubaOS 3.
monAPFrameRetryErrorRate Syntax Integer32Status Max-Access read-only Status deprecated Description The number of error packets as a percentage of the total packets received on this monitored access point. History Deprecated in ArubaOS 3.1.0.0. monAPChannelErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received on the current channel. History Update in ArubaOS 3.1—description.
monAPFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received on this monitored access point. History Added in ArubaOS 3.1 wlsxMonAPRateStatsTable The objects of the wlsx Monitor AP Rate Statistics table provide AP statistics that are sorted by rate categories. Table 48 wlsxMonAPRateStatsTable OIDs 166 | Monitor Object OID wlsxMonAPRateStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.1.2.
Table 48 wlsxMonAPRateStatsTable OIDs Object OID monAPStatsTotPktsAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.23 wlsxMonAPRateStatsEntry 23 monAPStatsTotBytesAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.24 wlsxMonAPRateStatsEntry 24 wlsxMonAPRateStatsEntry Syntax Sequence of wlsxMonAPRateStatsEntry Max-Access not-accessible Status current Description Data rate-based packet and byte count entry for a monitored access point.
monAPStatsTotBytesAt2Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 2 Mbps rate. monAPStatsTotPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 5 Mbps rate.
monAPStatsTotPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 6 Mbps rate. monAPStatsTotBytesAt6Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 6 Mbps rate.
monAPStatsTotBytesAt18Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 18 Mbps rate. monAPStatsTotPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 24 Mbps rate.
monAPStatsTotPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed from this BSSID at 48 Mbps rate. monAPStatsTotBytesAt48Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 48 Mbps rate.
monAPStatsTotBytesAt9Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed from this BSSID at 9 Mbps rate. wlsxMonAPDATypeStatsTable The objects of the wlsx Mon Access Point DA Type Statistics table provide information about all the BSSID packet and byte counts, which are sorted by the Destination Address (DA) Type. Table 49 wlsxMonAPDATypeStatsTable OIDs Object Object ID wlsxMonAPDATypeStatsEntry 1.3.6.1.4.1.14823.2.2.
monAPStatsTotDABroadcastPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of broadcast packets observed from this BSSID. monAPStatsTotDABroadcastBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of broadcast bytes observed from this BSSID.
monAPStatsTotDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of unicast bytes observed from this BSSID. wlsxMonAPFrameTypeStatsTable The objects of the wlsx Mon Access Point Frame Type Stats table provide statistics of the BSSID packet and byte counts, which are sorted by Destination Address (DA) Type.
monAPStatsTotCtrlPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of control packets observed from this BSSID. monAPStatsTotCtrlBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of control bytes observed from this BSSID.
wlsxMonAPPktSizeStatsEntry Syntax wlsxMonAPPktSizeStatsEntry Max-Access not-accessible Status current Description Packet size-based packet count entry for a BSSID. Index { monPhyAddress, monRadioNumber, monitoredApBSSID } monAPStatsPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets transmitted by the access point that were less than 64 bytes long. History Updated in ArubaOS 3.1—description.
monAPStatsPkts256To511 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets transmitted by the access point that were between 256 and 511 bytes long. monAPStatsPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets transmitted by the access point that were between 512 and 1023 bytes long.
wlsxMonAPHTRateStatsEntry Syntax WlsxMonAPHTRateStatsEntry Max-Access not-accessible Status current Description Data rate based packet and byte count entry for a monitored AP. Index monPhyAddress, monRadioNumber, monitoredApBSSID, monHTRate monHTRate Syntax ArubaHTRate Max-Access read-only Status current Description The rate at which the counters apply.
wlsxMonStationStatsTable The objects of the wlsx Monitor Station Statistics table provide aggregate statistics collected for a station. Table 51 MonStationStats Table Object Object ID wlsxMonStationStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1 wlsxMonStationStatsTable 1 monitoredStaPhyAddress 1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.1 wlsxMonStationStatsEntry 1 monStaChannelNum 1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.2 wlsxMonStationStatsEntry 2 monStaTxPkts 1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.
wlsxMonStationStatsEntry Syntax MonStationStatsEntry Max-Access not-accessible Status current Description Monitored Station Stats Entry. Index { monPhyAddress, monRadioNumber, monitoredStaPhyAddress } monitoredStaPhyAddress Syntax MacAddress Max-Access not-accessible Status current Description MAC address of the monitored station. monStaChannelNum Syntax Unsigned32 Max-Access read-only Status current Description The channel the station is currently using.
monStaRxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets received by this station. monStaRxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes received by this station. monStaTxBCastPkts Syntax Counter32 Max-Access read-only Status current Description The number of broadcast packets transmitted by this station.
monStaTxMCastBytes Syntax Counter32 Max-Access read-only Status current Description The number of multicast bytes transmitted by this station. monStaDataPkts Syntax Counter32 Max-Access read-only Status current Description The total number of data packets transmitted by this station. monStaCtrlPkts Syntax Counter32 Max-Access read-only Status current Description The total number of control packets transmitted by this station.
monStaTxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentication frames transmitted by this station. monStaRxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentication frames received by this station.
monStaFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted by this station. monStaFrameBandwidthRate Syntax Integer32 Max-Access read-only Status current Description The bandwidth of this station in Kbps.
monStaPhyType Syntax ArubaPhyType Max-Access read-only Status current Description PHY type of the monitored station. monStaRSSI Syntax Integer32 Max-Access read-only Status current Description SNR of the monitored station. monStaFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received by this station. History Added in ArubaOS 3.1.0.0.
Table 52 wlsxMonStaRateStatsTable OIDs (Continued) 186 | Monitor Object Object ID monStaTxBytesAt6Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.10 wlsxMonStaRateStatsEntry 10 monStaTxPktsAt12Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.11 wlsxMonStaRateStatsEntry 11 monStaTxBytesAt12Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.12 wlsxMonStaRateStatsEntry 12 monStaTxPktsAt18Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.13 wlsxMonStaRateStatsEntry 13 monStaTxBytesAt18Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.
Table 52 wlsxMonStaRateStatsTable OIDs (Continued) Object Object ID monStaRxBytesAt54Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.44 wlsxMonStaRateStatsEntry 44 monStaTxPktsAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.45 wlsxMonStaRateStatsEntry 45 monStaTxBytesAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.46 wlsxMonStaRateStatsEntry 46 monStaRxPktsAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.47 wlsxMonStaRateStatsEntry 47 monStaRxBytesAt9Mbps 1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.
monStaTxBytesAt2Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 2 Mbps rate. monStaTxPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 5 Mbps rate.
monStaTxPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 6 Mbps rate. monStaTxBytesAt6Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 6 Mbps rate.
monStaTxBytesAt18Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 18 Mbps rate. monStaTxPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 24 Mbps rate.
monStaTxPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station at 48 Mbps rate. monStaTxBytesAt48Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets transmitted by the station at 48 Mbps rate.
monStaRxBytesAt1Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 1 Mbps rate. monStaRxPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 2 Mbps rate.
monStaRxPktsAt11Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 11 Mbps rate. monStaRxBytesAt11Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 11 Mbps rate.
monStaRxBytesAt12Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 12 Mbps rate. monStaRxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 18 Mbps rate.
monStaRxPktsAt36Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 36 Mpbs rate. monStaRxBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 36 Mpbs rate.
monStaRxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station at 54 Mbps rate. monStaRxBytesAt54Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 54 Mbps rate.
monStaRxBytesAt9Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of octets received by the station at 9 Mbps rate. wlsxMonStaDATypeStatsTable The objects of the wlsx Monitor Station DA Type Statistics table provide station statistics sorted by Destination Address (DA) types. Table 53 MonStaDATypeStatsTable OIDs Object Object ID wlsxMonStaDATypeStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.3.
monStaTxDABroadcastBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of broadcast bytes transmitted by this station. monStaTxDAMulticastPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of multicast packets transmitted by this station.
wlsxMonStaFrameTypeStatsTable The objects of the wlsx Monitor Station Frame Type Statistics table provide packet and byte counts for monitored stations. The information is sorted by frame type. Table 54 MonStaFrameTypeStatsTable OIDs Object Object ID wlsxMonStaFrameTypeStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1 wlsxMonStaFrameTypeStatsTable 1 monStaTxMgmtPkts 1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.1 wlsxMonStaFrameTypeStatsTable 1 monStaTxMgmtBytes 1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.
monStaTxMgmtBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the transmitted management bytes from a station. monStaTxCtrlPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the transmitted control packets from a station. monStaTxCtrlBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the transmitted control bytes from a station.
monStaRxMgmtPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of received management packets at a station. monStaRxMgmtBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of received management bytes at a station. monStaRxCtrlPkts Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of received control packets at a station.
monStaRxDataBytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of received data bytes at a station. wlsxMonStaPktSizeStatsTable The objects of the wlsx Monitor Station Packet Size Statistics table provide packet and byte counts for monitored stations. The information is sorted by packet sizes. Table 55 wlsxMonStaPktSizeStatsTable OIDs Object Object ID wlsxMonStaPktSizeStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.5.
monStaTxPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station that were less than 64 bytes long. monStaTxPkts64To127 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station that were between 64 and 127 bytes long.
monStaTxPkts1024To1518 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets transmitted by the station that were between 1024 and 1518 bytes long. monStaRxPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station that were less than 64 bytes long.
monStaRxPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station that were between 512 and 1023 bytes long. monStaRxPkts1024To1518 Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the number of packets received by the station that were between 1024 and 1518 bytes long.
Table 56 wlsxMonAPInfoTable OIDs (Continued) Object Object ID monAPInfoWPAAuthAlgorithm 1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.17 wlsxMonAPInfoEntry 17 monAPInfoIBSS 1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.
Max-Access read-only Status current Description ESSID of the monitored access point. monAPInfoRSSI Syntax Integer32 Max-Access read-only Status current Description SNR of the monitored access point. monAPInfoMonitorTime Syntax TimeTicks Max-Access read-only Status current Description This attribute indicates how long the access point has been monitored.
Status current Description The sample time in which SNR data was collected. monAPInfoStatus Syntax Integer up(1) down(2) Max-Access read-only Status current Description Indicates whether this access point is considered to be up or down. monAPInfoConfidence Syntax Integer32 Max-Access read-only Status current Description Indicates the confidence that a suspected rogue access point is in fact a rogue in terms of percentage. History Added in ArubaOS 3.1.0.0.
monAPInfoHTMode Syntax ArubaHTMode Max-Access read-only Status current Description Indicates the HT mode of the monitored AP, if any. History Added in ArubaOS 3.3.0.0. monAPInfoEncryptionType Syntax monAPIEncryptionType Max-Access read-only Status current Description Indicates the Encryption type of the monitored AP. History Added in ArubaOS 6.
Status current Description Indicates if the monitored AP is part of an adhoc network. History Added in ArubaOS 6.0 wlsxMonStationInfoTable The objects of the wlsx Monitor Station Information table provide statistics of all the wireless stations that are monitored. Table 57 wlsxMonStationInfoTable OIDs Object Object ID wlsxMonStationInfoEntry 1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1 wlsxMonStationInfoTable 1 monStaInfoChannelNummonStaInfoB 1.3.6.1.4.1.14823.2.2.1.6.7.2.1.1.
Status current Description The channel the station is currently using. History Updated in ArubaOS 3.1—description. Syntax MacAddress Max-Access read-only Status current Description BSSID of the monitored station. History Updated in ArubaOS 3.1—description. monStaInfoESSID Syntax DisplayString Max-Access read-only Status current Description ESSID of the monitored station. History Updated in ArubaOS 3.1—description.
monStaInfoRSSI Syntax Integer32 Max-Access read-only Status current Description SNR of the monitored station. History Updated in ArubaOS 3.1—description. monStaInfoClassification Syntax ArubaStationType Max-Access read-only Status current Description Classification of the monitored station. monStaInfoMonitorTime Syntax TimeTicks Max-Access read-only Status current Description This attribute indicates how long the station has been monitored. History Updated in ArubaOS 3.
monStaInfoSnrSignalPkts Syntax Integer32 Max-Access read-only Status current Description The number of signal packets observed by the monitoring station during this sample time. History Updated in ArubaOS 3.1—description. monStaInfoSnrSampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which SNR data was collected.
wlsxMonEventCountTable The objects of the wlsx Monitor Event Count table provide the event ID and the number of events of the event type. Table 58 wlsxMonEventCountTable OIDs Object Object ID wlsxMonEventCountEntry 1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1 wlsxMonEventCountTable 1 monEventID 1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1.1 wlsxMonEventCountEntry 1 monEventCount 1.3.6.1.4.1.14823.2.2.1.6.6.2.6.1.
wlsxMonStationHTRateStatsTable This table contains all the monitored AP Packet and Byte Counts but represented in terms of HT rate categories. Table 59 wlsxMonStationHTRateStatsTable OIDs Object Object ID wlsxMonStationHTRateStatsEntry 1.3.6.1.4.1.14823.2.2.1.6.6.1.6.2.7 wlsxMonStationHTRateStatsTable 1 monStaTxHTPkts 1.3.6.1.4.1.14823.2.2.1.6.6.1.6.2.7.1 wlsxMonStationHTRateStats Entry 1 monStaTxHTBytes 1.3.6.1.4.1.14823.2.2.1.6.6.1.6.2.7.2 wlsxMonStationHTRateStats Entry 2 monStaRxHTPkts 1.3.
monStaRxHTPkts Syntax Counter32 Max-Access read-only Status current Description The total number of packets received at the indicated rate. History Added in ArubaOS 3.3.0.0. monStaRxHTBytes 216 | Monitor Syntax Counter32 Max-Access read-only Status current Description The total number of bytes received at the indicated rate. History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
Chapter 11 Signal Noise Ratio The Signal Noise Ratio (SNR) module provides information about signal quality and packets. One value of SNR is the signal quality during a sample period. The signal quality affects the quality of the transmitted packets. The available SNR values include signal strength (total, maximum, minimum). Additional information is the number of packets that were transmitted during the sample time. Figure 13 shows the architecture of the SNR MIB relative to 1.3.6.1.4.1.14823 (iso.org.
The SNR MIB contains the following tables. The objects of each table are described in the following sections. Table 60 SNR Tables Table Description wlsxAPSnrTable This table lists SNR information about monitored APs. wlsxStaSnrTable This table lists SNR information about monitored stations. wlsxAPSnrBSSIDTable This table lists SNR information about monitored access points. wlsxStaSnrPhyTable This table lists SNR information about monitored stations.
wlsxAPSnrEntry Syntax wlsxAPSnrEntry Max-Access not-accessible Status current Description Station management entry. Index {monPhyAddress, monRadioNumber, monitoredApBSSID} apSnrAverageSignalStrength Syntax Integer32 Max-Access read-only Status current Description The total signal strength observed by the monitoring station during this sample time.
apSnrSampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which this data is collected. wlsxStaSnrTable The objects of the station SNR table provide signal information about the access points connected to this controller. Table 62 wlsxStaSnrTable OIDs Object Object ID wlsxAPSnrEntry 1.3.6.1.4.1.14823.2.2.1.7.1.2.1 wlsxStaSnrTable 1 apSnrAverageSignalStrength 1.3.6.1.4.1.14823.2.2.1.7.1.2.1.1 wlsxStaSnrEntry 1 apSnrSignalPkts 1.3.6.1.4.1.14823.2.2.
Max-Access read-only Status current Description The number of signal packets observed by the monitoring station during this sample time. staSnrHighestRxSignalStrength Syntax Integer32 Max-Access read-only Status current Description The highest signal strength observed by the monitoring station during this sample time.
wlsxAPSnrBSSIDEntry Syntax wlsxAPSnrBSSIDEntry Max-Access not-accessible Status current Description Station management entry. Index {monitoredApBSSID, monPhyAddress, monRadioNumber} apSnrBSSIDAverageSignalStrength Syntax Integer32 Max-Access read-only Status current Description The total signal strength observed by the monitoring station during this sample time.
apSnrBSSIDSampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which this data is collected. wlsxStaSnrPhyTable The objects of the wlsx Station SNR PHY table provide information of the monitored stations. Table 64 wlsxStaSnrPhyTable OIDs Object Object ID wlsxStaSnrPhyEntry 1.3.6.1.4.1.14823.2.2.1.7.1.4.1 wlsxStaSnrPhyTable 1 staSnrPhyAverageSignalStrength 1.3.6.1.4.1.14823.2.2.1.7.1.4.1.1 wlsxStaSnrPhyEntry 1 staSnrPhySignalPkts 1.3.6.1.4.1.14823.
wlsxStaSnrPhyEntry Syntax wlsxStaSnrPhyEntry Max-Access not-accessible Status current Description Station management entry. Index {monitoredStaPhyAddress, monPhyAddress, monRadioNumber} staSnrPhyAverageSignalStrength Syntax Integer32 Max-Access read-only Status current Description The total signal strength observed by the monitoring station during this sample time.
staSnrPhySampleTime Syntax Integer32 Max-Access read-only Status current Description The sample time in which this data is collected. Dell PowerConnect W-Series ArubaOS 6.
| Signal Noise Ratio Dell PowerConnect W-Series ArubaOS 6.
Chapter 12 Switch The Switch module provides statistical information about Dell controllers, including storage and memory utilization, and the wireless stations associated with the access points. Figure 14 shows the architecture of the Switch MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Switch MIBs are listed in the file aruba-switch.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Figure 14 Switch Hierarchy 1.3.6.1.4.
Table 65 System X Group MIB Objects (Continued) Tables wlsxSwitchLicenseTable This table lists all valid licenses installed on the switch. wlsxSysXProcessorTable This table lists all the processors and the corresponding load. wlsxSysXStorageTable This table lists the storage devices in the switch and their utilization numbers. wlsxSysXMemoryTable This table lists the memory utilization of the switch.
wlsxHostname Syntax DisplayString (Size(1.32)) Max-Access read-only Status current Description Name of the switch. wlsxModelName Syntax DisplayString (Size(1..32)) Max-Access read-only Status current Description Model name of the switch. wlsxSwitchIp Syntax IpAddress Max-Access read-only Status current Description Switch IP as configured by the user. This IP address uniquely identifies the switch.
wlsxSwitchListTable The objects of the wlsx Switch List table list the switches in the domain. Note: This table is only populated on the master switch—information can only be queried from the master switch. If a local switch is queried, an empty table will be returned. Table 67 wlsxSwitchListTable OIDs 230 | Switch Object Object ID wlsxSwitchListEntry 1.3.6.1.4.1.14823.2.2.1.1.1.6.1 wlsxSwitchListTable 1 switchListSwitchIPAddress 1.3.6.1.4.1.14823.2.2.1.1.1.6.1.
wlsxSwitchListEntry Syntax MxSwitchListEntry Max-Access not-accessible Status current Description Switch List Entry. Index { switchListSwitchIPAddress } switchListSwitchIPAddress Syntax IpAddress Max-Access not-accessible Status current Description P Address of the switch. switchListSwitchRole Syntax Integer master(1) local(2) standbymaster(3) Max-Access read-only Status current Description Role of the switch.
Table 68 wlsxSwitchLicenseTable OIDs (Continued) 232 | Switch Object Object ID licenseIndex 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.1 wlsxLicenseEntry 1 licenseKey 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.2 wlsxLicenseEntry 2 licenseInstalled 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.3 wlsxLicenseEntry 3 licenseExpires 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.4 wlsxLicenseEntry 4 licenseFlags 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.5 wlsxLicenseEntry 5 licenseService 1.3.6.1.4.1.14823.2.2.1.1.1.8.1.
wlsxLicenseEntry Syntax LicenseEntry Max-Access not-accessible Status current Description License Entry. Index { licenseIndex } licenseIndex Syntax Integer32 Max-Access not-accessible Status current Description License ID number. licenseKey Syntax DisplayString Max-Access read-only Status current Description License Key. licenseInstalled Syntax DisplayString Max-Access read-only Status current Description License installation time.
licenseFlags Syntax DisplayString Max-Access read-only Status current Description License flags E – enabled A – auto-generated R – reboot required to activate licenseService Syntax DisplayString Max-Access read-only Status current Description The service enabled by this license. wlsxSysXProcessorTable The objects of the wlsx Sys XProcessor table list all the processors and the corresponding load.
wlsxSysXProcessorEntry Syntax wlsxSysXProcessorEntry Max-Access not-accessible Status current Description An entry for one processor contained by the switch. History Added in ArubaOS 2.3. sysXProcessorID Syntax Integer32 Max-Access not-accessible Status current Description Processor Index. History Added in ArubaOS 2.3. sysXProcessorDescr Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Description of the processor. History Added in ArubaOS 2.3.
The objects of the wlsx Sys XStorage table list the storage devices in the switch. Table 70 wlsxSysXStorageTable OIDs 236 | Switch Object Object ID wlsxSysXStorageEntry 1.3.6.1.4.1.14823.2.2.1.1.1.10.1 wlsxSysXStorageTable 1 sysXStorageIndex 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.1 wlsxSysXStorageEntry 1 sysXStorageType 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.2 wlsxSysXStorageEntry 2 sysXStorageSize 1.3.6.1.4.1.14823.2.2.1.1.1.10.1.3 wlsxSysXStorageEntry 3 sysXStorageUsed 1.3.6.1.4.1.14823.2.2.1.1.1.
wlsxSysXStorageEntry Syntax wlsxSysXStorageEntry Max-Access not-accessible Status current Description An entry for one long-term storage device contained by the switch. History Added in ArubaOS 2.3. sysXStorageIndex Syntax Integer32 Max-Access not-accessible Status current Description The storage index. History Added in ArubaOS 2.3. sysXStorageType Syntax Integer ram(1) flashMemory(2) Max-Access read-only Status current Description The storage type is indicated by Syntax.
Max-Access read-only Status current Description The size of the storage file system in MB. History Added in ArubaOS 2.3. sysXStorageName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description The name of the storage file system. History Added in ArubaOS 2.3. wlsxSysXMemoryTable The objects of the wlsx Sys XMemory table describes the memory utilization of the switch. Table 71 wlsxSysXMemoryTable OIDs 238 | Switch Object Object ID wlsxSysXMemoryEntry 1.3.6.1.
wlsxSysXMemoryEntry Syntax WlsxSysXMemoryEntry Max-Access not-accessible Status current Description An entry for one memory region on the switch. Currently, only the CP region is monitored. History Added in ArubaOS 2.3. ysysXMemoryIndex Syntax Integer32 Max-Access not-accessible Status current Description Memory index. History Added in ArubaOS 2.3. sysXMemorySize Syntax Integer32 Max-Access read-only Status current Description Total memory in KB. History Added in ArubaOS 2.3.
Status current Description Free memory in KB. History Added in ArubaOS 2.3. wlsxSwitchLicenseSerialNumber Syntax DisplayString Max-Access read-only Status current Description The license serial number of the switch. wlsxSwitchUserTable The objects of the wlsx Switch User table list all the users (wired and wireless) that are connected to the switch. Users are identified by their IP addresses. Table 72 wlsxSwitchUserTable OIDs 240 | Switch Object Object ID wlsxSwitchUserEntry 1.3.6.1.4.1.
wlsxSwitchUserEntry Syntax MxSwitchUserEntry Max-Access not-accessible Status current Description User entry. Index { userIpAddress } userIpAddress Syntax IpAddress Max-Access not-accessible Status current Description IP address from which the user connected to the switch. userPhyAddress Syntax MacAddress Max-Access read-only Status current Description Physical address of the station from which the user connected to the switch. userName Syntax DisplayString(Size(0..
userUpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the user was connected to the switch. userAuthenticationMethod Syntax Integer none(1) other(2) web(3) dot1x(4) vpn(5) mac(6) Max-Access read-only Status current Description Authentication mechanism used by the user to connect to the switch. userLocation Syntax DisplayString(Size(0..32)) Max-Access read-only Status current Description Location of the access point (in Building.Floor....
Description VLAN on which the user is connected to the switch. Dell PowerConnect W-Series ArubaOS 6.
userConnectedSlot Syntax Integer32 Max-Access read-only Status current Description Slot on switch where the user connection terminates. userConnectedPort Syntax Integer32 Max-Access read-only Status current Description Port on switch where the user connection terminates. userBWContractName Syntax DisplayString(Size(0..32)) Max-Access read-only Status current Description Name of the bandwidth contract applied to this user.
Table 73 wlsxSwitchUser6Table OIDs (Continued) Object Object ID user6PhyAddress wlsxSwitchUser6Entry 2 user6Name wlsxSwitchUser6Entry 3 user6Role wlsxSwitchUser6Entry 4 user6UpTime wlsxSwitchUser6Entry 5 user6AuthenticationMethod wlsxSwitchUser6Entry 6 user6Location wlsxSwitchUser6Entry 7 user6ServerName wlsxSwitchUser6Entry 8 user6ConnectedVlan wlsxSwitchUser6Entry 9 user6ConnectedSlot wlsxSwitchUser6Entry 10 user6ConnectedPort wlsxSwitchUser6Entry 11 user6BWContractName wlsxSwitchUs
wlsxSwitchUser6Entry Syntax wlsxSwitchUser6Entry Max-Access not-accessible Status current Description User Entr Index { user6IpAddress } History Added in ArubaOS 3.3.0.0. user6IpAddress Syntax DisplayString(SIZE(0..32)) Max-Access not-accessible Status current Description IPv6 Address from which the user connected to the switch. History Added in ArubaOS 3.3.0.0.
Max-Access read-only Status current Description The Role configured for this user. History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
user6UpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the user is connected to the switch. History Added in ArubaOS 3.3.0.0. user6AuthenticationMethod Syntax Integer none(1) other(2) web(3) dot1x(4) vpn(5) mac(6) Max-Access read-only Status current Description Authentication mechanism used by the user to connect to the switch. History Added in ArubaOS 3.3.0.0. user6Location Syntax DisplayString(SIZE(0..
user6ConnectedVlan Syntax Integer32 Max-Access read-only Status current Description Vlan on which the user is connected to the switch. History Added in ArubaOS 3.3.0.0. user6ConnectedSlot Syntax Integer32 Max-Access read-only Status current Description Slot on switch, where the user connection terminates. History Added in ArubaOS 3.3.0.0. user6ConnectedPort Syntax Integer32 Max-Access read-only Status current Description Port on switch, where the user connection terminates.
Max-Access read-only Status current Description Indicates how the Bandwidth Contract is used. History Added in ArubaOS 3.3.0.0. wlsxSwitchStationMgmtTable The objects of the wlsx Switch Station Management table provide information about the wireless stations associated with the access points connected to this switch. Table 74 wlsxSwitchStationMgmtTable OIDs 250 | Switch Object Object ID wlsxSwitchStationMgmtEntry 1.3.6.1.4.1.14823.2.2.1.1.2.2.1 wlsxSwitchStationMgmtTable 1 staPhyAddress 1.
wlsxSwitchStationMgmtEntry Syntax MxSwitchStationMgmtEntry Max-Access not-accessible Status current Description Station management entry. Index { staPhyAddress, staAccessPointBSSID } staPhyAddress Syntax MacAddress Max-Access not-accessible Status current Description The physical address of the station. staAccessPointBSSID Syntax MacAddress Max-Access not-accessible Status current Description BSSID of the access point through which the station is connected to the switch.
staAssociationID Syntax Unsigned32 Max-Access read-only Status current Description Association ID with which the station is associated with this system. staAccessPointESSID Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description ESSID of the access point. staSignalToNoiseRatio Syntax Integer32 Max-Access read-only Status current Description SNR for the BSSID.
staReceiveRate Syntax Integer rate1Mbps(1) rate2Mbps(2) rate5point5Mbps(3) rate6Mbps(4) rate9Mbps(5) rate11Mbps(6) rate12Mbps(7) rate18Mbps(8) rate24Mbps(9) rate36Mbps(10) rate48Mbps(11) rate54Mbps(12) Max-Access read-only Status current Description The receive rate of the channel. wlsxSwitchStationStatsTable The objects of the wlsx Switch Station Stats table provide information about the statistics of the wireless stations associated with the access points connected to this switch.
wlsxSwitchStationStatsEntry Syntax MxSwitchStationStatsEntry Max-Access not-accessible Status current Description Station statistics entry. Index { staPhyAddress, staAccessPointBSSID } staTxPackets Syntax Counter32 Max-Access read-only Status current Description Total packets transmitted by the station. staTxBytes Syntax Counter32 Max-Access read-only Status current Description Total bytes transmitted by the station.
staBwRate Syntax Integer32 Max-Access read-only Status current Description Bandwidth rate in Kbps of the station. staFrameRetryRate Syntax Integer32 Max-Access read-only Status current Description Station frame retry rate. staFrameLowSpeedRate Syntax Integer32 Max-Access read-only Status current Description Station frame low speed rate. staFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description Station frame non-unicast packet rate.
Max-Access read-only Status current Description Station frame receive error rate. wlsxAccessPointInfoGroup The wlsx Access Point Info group contains tables that provide access point information. Table 76 wlsxAccessPointInfoGroup OIDs Object Object ID wlsxSwitchTotalNumAccessPoints 1.3.6.1.4.1.14823.2.2.1.1.3.1. wlsxAccessPointInfoGroup 2 wlsxSwitchTotalNumStationsAssociated 1.3.6.1.4.1.14823.2.2.1.1.3.
Table 77 wlsxSwitchAccessPointTable OIDs (Continued) Object Object ID apPhyType 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.6 wlsxSwitchAccessPointEntry 6 apType 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.7 wlsxSwitchAccessPointEntry 7 apCurrentChannel 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.8 wlsxSwitchAccessPointEntry 8 apLocation 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.9 wlsxSwitchAccessPointEntry 9 apTotalTime 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.10 wlsxSwitchAccessPointEntry 10 apInactiveTime 1.3.6.1.4.1.14823.2.2.1.1.3.3.1.
wlsxSwitchAccessPointEntry Syntax MxSwitchAccessPointEntry Max-Access not-accessible Status current Description Station management entry. Index { apBSSID } apBSSID Syntax MacAddress Max-Access not-accessible Status current Description The physical address of the access point. apESSID Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description ESSID of the access point.
apIpAddress Syntax IpAddress Max-Access read-only Status current Description Address of the access point. apPhyType Syntax Integer dot11a(1) dot11b(2) dot11g(3) Max-Access read-only Status current Description Physical layer protocol support of the access point. apType Syntax Integer ap(1) am(2) Max-Access read-only Status current Description Indicates whether the access point is an air monitor or an access point. apCurrentChannel Syntax Integer(1..
apTotalTime Syntax TimeTicks Max-Access read-only Status current Description Time since the access point was connected to the switch. apInactiveTime Syntax TimeTicks Max-Access read-only Status current Description Time since the access point has been inactive. apLoadBalancing Syntax TruthValue Max-Access read-only Status current Description Indicates whether load balancing is enabled or not.
apTransmitRate Syntax Integer rate1Mbps(1) rate2Mbps(2) rate5point5Mbps(3) rate6Mbps(4) rate9Mbps(5) rate11Mbps(6) rate12Mbps(7) rate18Mbps(8) rate24Mbps(9) rate36Mbps(10) rate48Mbps(11) rate54Mbps(12) Max-Access read-only Status current Description Indicates transmit rate of the channel.
Table 78 wlsxSwitchGlobalAPTable OIDs 262 | Switch Object Object ID wlsxSwitchGlobalAPEntry 1.3.6.1.4.1.14823.2.2.1.1.3.4.1 wlsxSwitchGlobalAPTable 1 globalAPLocation 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1 wlsxSwitchGlobalAPEntry 1 globalAPAddress 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2 wlsxSwitchGlobalAPEntry 2 globalAPLocalSwitch 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3 wlsxSwitchGlobalAPEntry 3 globalAPdot11aPhyAddr 1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4 wlsxSwitchGlobalAPEntry 4 globalAPdot11bPhyAddr 1.3.
wlsxSwitchGlobalAPEntry Syntax MxSwitchGlobalAPEntry Max-Access not-accessible Status current Description Station Management Entry. Index { globalAPLocation, globalAPAddress } globalAPLocation Syntax DisplayString(Size(0..32)) Max-Access not-accessible Status current Description Physical location of the AP, defined in building.floor.location format. globalAPAddress Syntax IpAddress Max-Access not-accessible Status current Description Address of the access point.
globalAPdot11bPhyAddr Syntax MacAddress Max-Access read-only Status current Description Physical MAC address of the module supporting dot11b in the access point. AP can have support for both dot11a and dot11b physical layer. tvglobalAPState Syntax Integer(1..7) Max-Access read-only Status current Description Values are deprecated.
Table 79 wlsxSwitchAccessPointStatsTable OIDs (Continued) Object Object ID apBSSTxBytes 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.9 wlsxSwitchAccessPointStatsEntry 9 apBSSRxPackets 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.10 wlsxSwitchAccessPointStatsEntry 10 apBSSRxBytes 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.11 wlsxSwitchAccessPointStatsEntry 11 apBSSBwRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.12 wlsxSwitchAccessPointStatsEntry 12 apBSSFrameRetryRate 1.3.6.1.4.1.14823.2.2.1.1.3.5.1.
wlsxSwitchAccessPointStatsEntry Syntax MxSwitchAccessPointStatsEntry Max-Access not-accessible Status current Description Access point stats entry. Index { apBSSID } apStatsChannel Syntax Integer(1..165) Max-Access read-only Status current Description Channel on which the access point is operating. apChannelBwRate Syntax Integer32 Max-Access read-only Status current Description Bandwidth rate in Kbps of the access point channel.
apChannelFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description Access point channel frame non-unicast packet rate. apChannelFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description Access point channel frame fragmentation rate. apChannelFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description Access point channel frame receive error rate.
| Switch Max-Access read-only Status current Description Total packets received by the access point on this BSSID. Dell PowerConnect W-Series ArubaOS 6.
apBSSRxBytes Syntax Counter32 Max-Access read-only Status current Description Total bytes received by the access point on this BSSID. apBSSBwRate Syntax Integer32 Max-Access read-only Status current Description Bandwidth rate in Kbps of the access point on this BSSID. apBSSFrameRetryRate Syntax Integer32 Max-Access read-only Status current Description Frame retry rate on this BSSID.
Max-Access read-only Status current Description Frame fragmentation rate on this BSSID. apBSSFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description Frame receive error rate on this BSSID. wlsxSwitchTraps Group The objects of the wlsx Switch Traps group define the objects (variables) that may be returned with a trap listed in the swith traps (see Table 81 on page 279). Table 80 wlsxSwitchTraps OIDs 270 | Switch Object Object ID wlsxAuthServerName 1.3.6.1.4.
Table 80 wlsxSwitchTraps OIDs (Continued) Object Object ID wlsxApTxPower 1.3.6.1.4.1.14823.2.2.1.1.100.100.22 wlsxSwitchTrapObjectsGroup 22 wlsxESIServerGrpName 1.3.6.1.4.1.14823.2.2.1.1.100.100.23 wlsxSwitchTrapObjectsGroup 23 wlsxESIServerName 1.3.6.1.4.1.14823.2.2.1.1.100.100.24 wlsxSwitchTrapObjectsGroup 24 wlsxESIServerIpaddress 1.3.6.1.4.1.14823.2.2.1.1.100.100.25 wlsxSwitchTrapObjectsGroup 25 wlsxLicenseDaysRemaining 1.3.6.1.4.1.14823.2.2.1.1.100.100.
wlsxAuthServerName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object is used in the traps to indicate the authentication server used for authentication. wlsxAuthServerTimeout Syntax Integer32 Max-Access read-only Status current Description This object is used in the traps to indicate the authentication server timeout.
Max-Access read-only Status current Description This object is used in the traps to indicate the voltage value in float. Dell PowerConnect W-Series ArubaOS 6.
wlsxTemperatureValue Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object is used in the traps to indicate temperature value. wlsxProcessName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object is used in the traps to indicate a process name. wlsxStationMacAddress Syntax MacAddress Max-Access read-only Status current Description The physical address of the station.
Status current Description This object is used in a trap to identify a spoofed IP address. Dell PowerConnect W-Series ArubaOS 6.
wlsxSpoofedOldPhyAddress Syntax MacAddress Max-Access read-only Status current Description This object is used in a trap to identify a old MAC address. wlsxSpoofedNewPhyAddress Syntax MacAddress Max-Access read-only Status current Description This object is used in a trap to identify a new MAC address. wlsxDBName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object is used in a trap to identify name of the database.
wlsxDBType Syntax Integer mssql(1) mysql(2) Max-Access read-only Status current Description This object is used in a trap to identify the port of the user. wlsxVrID Syntax Integer32 Max-Access read-only Status current Description This object contains the virtual router identifier. wlsxVrMasterIp Syntax IpAddress Max-Access read-only Status current Description This object contains the master IP address.
wlsxESIServerGrpName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object represents the External Services Interface (ESI) Server Group name. wlsxESIServerName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description This object represents the External Services Interface (ESI) Server name.
Switch Traps–Notifications Notification provides an acknowledge to the device that sent the trap message. Table 81 Switch Trap Notification OIDs Object Object OID wlsxSwitchIPChanged 1.3.6.1.4.1.14823.2.2.1.1.100.1001 wlsxSwitchTraps 1001 wlsxSwitchRoleChange 1.3.6.1.4.1.14823.2.2.1.1.100.1002 wlsxSwitchTraps 1002 wlsxUserEntryCreated 1.3.6.1.4.1.14823.2.2.1.1.100.1003 wlsxSwitchTraps 1003 wlsxUserEntryDeleted 1.3.6.1.4.1.14823.2.2.1.1.100.
Table 81 Switch Trap Notification OIDs (Continued) 280 | Switch Object Object OID wlsxChannelChanged 1.3.6.1.4.1.14823.2.2.1.1.100.1033 wlsxSwitchTraps 1033 wlsxStationAddedToBlackList 1.3.6.1.4.1.14823.2.2.1.1.100.1034 wlsxSwitchTraps 1034 wlsxStationRemovedFromBlackList 1.3.6.1.4.1.14823.2.2.1.1.100.1035 wlsxSwitchTraps 1035 wlsxIpSpoofingDetected 1.3.6.1.4.1.14823.2.2.1.1.100.1036 wlsxSwitchTraps 1036 wlsxDBCommunicationFailure 1.3.6.1.4.1.14823.2.2.1.1.100.
wlsxSwitchIPChanged Objects { wlsxSwitchIp } Status current Description A trap which indicates that the switch IP address has changed. wlsxSwitchRoleChange Objects { wlsxSwitchRole } Status current Description A trap which indicates that the role of the switch has changed in the domain—authentication traps. wlsxUserEntryCreated Objects { userPhyAddress } Status current Description A trap which indicates that a new user is created.
| Switch Status current Description A trap which indicates that a user authentication has failed. Dell PowerConnect W-Series ArubaOS 6.
wlsxAuthServerReqTimedOut Objects { wlsxAuthServerName } Status current Description A trap which indicates that the authentication server request timed out. wlsxAuthServerTimedOut Objects { wlsxAuthServerName, wlsxAuthServerTimeout } Status current Description A trap which indicates that the authentication server timed out. wlsxAuthServerIsUp Objects { wlsxAuthServerName } Status current Description A trap which indicates that the authentication server is up.
wlsxFanFailure Objects { wlsxFanNumber } Status current Description A trap which indicates that the fan has failed. wlsxOutOfRangeVoltage Objects { wlsxVoltageType, wlsxVoltageValue } Status current Description A trap which indicates that the switch received out-of-range voltage. wlsxOutOfRangeTemperature Objects { wlsxTemperatureValue } Status current Description A trap which indicates that the temperature is out of bounds.
wlsxProcessExceedsMemoryLimits Objects { wlsxProcessName } Status current Description A trap which indicates that a process is consuming large amounts of memory. wlsxLowOnFlashSpace Status current Description A trap which indicates that the switch is running low on flash space. wlsxLowMemory Status current Description A trap which indicates that the system free memory is low. wlsxFanTrayRemoved Status current Description A trap which indicates that the fan tray is removed.
wlsxAccessPointIsUp Objects { apLocation, apIpAddress } Status current Description Access point up trap—a trap which indicates that an access point at location apLocation and address apIpAddress is up. wlsxAccessPointIsDown Objects { apLocation, apIpAddress } Status current Description Access point down trap—a trap which indicates that an access point at location apLocation and address apIpAddress is down.
wlsxIpSpoofingDetected Objects { wlsxSpoofedIpAddress, wlsxSpoofedOldPhyAddress, wlsxSpoofedNewPhyAddress } Status current Description A trap indicating that the switch detected IP spoofing. wlsxDBCommunicationFailure Objects { wlsxDBName, wlsxDBUserName, wlsxDBIpAddress, wlsxDBType } Status current Description A trap to indicate that communication with database failed.
wlsxLicenseExpiry Objects { wlsxLicenseDaysRemaining } Status current Description A trap which indicates that one or more licenses on the switch will expire in days. IPv6 Authentication Traps wlsxUser6EntryCreated Objects { user6PhyAddress } Status current Description A trap which indicates that a New user is created. History Added in ArubaOS 3.3.0.0.
wlsxUser6AuthenticationFailed Objects { user6PhyAddress } Status current Description A trap which indicates that a user authentication has failed. History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
| Switch Dell PowerConnect W-Series ArubaOS 6.
Chapter 13 System External The System External module provides information about resource usages such as memory and CPU. Figure 15 shows the architecture of the System External MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The System External MIBs are listed in the file aruba-systemext.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Figure 15 Stem Ext Hierarchy 1.3.6.1.4.1.
The System EXT MIB contains the following tables. The objects of each table are described in the following sections. Table 82 System External Group Tables Table Description wlsxSysExtProcessorTable The table of processors contained by the controller. wlsxSysExtStorageTable The table of storage devices contained by the controller. wlsxSysExtMemoryTable The memory status of the controller. wlsxSysExtCardTable The table of hardware modules in the controller.
wlsxSysExtModelName Syntax DisplayString (Size(1..32)) Max-Access read-only Status current Description Model name of the controller. History Added in ArubaOS 2.3. wlsxSysExtSwitchRole Syntax ArubaSwitchRole Max-Access read-only Status current Description Role of this controller in the Dell Switch Domain. History Added in ArubaOS 2.3. wlsxSysExtSwitchMasterIp Syntax IpAddress Max-Access read-only Status current Description Switch IP of the master controller.
Status current Description The base MAC address of the switch. History Added in ArubaOS 2.3. 294 | System External Dell PowerConnect W-Series ArubaOS 6.
wlsxSysExtFanTrayAssemblyNumber Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Assembly number of the fan tray. History Added in ArubaOS 2.3. wlsxSysExtFanTraySerialNumber Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Serial number of the fan tray. History Added in ArubaOS 2.3. wlsxSysExtInternalTemparature Syntax DisplayString(Size(0..
Status current Description The number of licenses installed on the controller. History Added in ArubaOS 2.3. 296 | System External Dell PowerConnect W-Series ArubaOS 6.
wlsxSysExtMMSCompatLevel Syntax Integer32 Max-Access read-only Status current Description Lists the compatibility level of this controller with the MMS. History Added in version 3.1 wlsxSysExtMMSConfigID Syntax Integer32 Max-Access read-only Status current Description This object represents the value of the MMS Configuration ID in the controller. History Added in version 3.
Status current Description The reason for the last controller reload. History Added in version 2.5 wlsxSysExtLastStatsReset Syntax TimeTicks Max-Access read-only Status current Description Last time controller stats was reset. History Added in version 3.2 wlsxSysExtProcessorTable The objects of the wlsx System External Process table list all the processors and the corresponding loads. Table 83 wlsxSysExtProcessorTable OIDs Object Object ID wlsxSysExtProcessorEntry 1.3.6.1.4.1.14823.2.2.
wlsxSysExtProcessorEntry Syntax wlsxSysExtProcessorEntry Max-Access not-accessible Status current Description An entry for one processor contained by the controller. History Added in ArubaOS 2.3. sysExtProcessorID Syntax Integer32 Max-Access not-accessible Status current Description Processor index. History Added in ArubaOS 2.3. sysExtProcessorDescr Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Description of the processor.
The objects of the wlsx System External Storage table provide information of the storage devices in the controller. Table 84 wlsxSysExtStorageTable OIDs Object Object ID wlsxSysExtStorageEntry 1.3.6.1.4.1.14823.2.2.1.2.1.14.1 wlsxSysExtStorageTable 1 sysExtStorageIndex 1.3.6.1.4.1.14823.2.2.1.2.1.14.1.1 wlsxSysExtStorageEntry 1 sysExtStorageType 1.3.6.1.4.1.14823.2.2.1.2.1.14.1.2 wlsxSysExtStorageEntry 2 sysExtStorageSize 1.3.6.1.4.1.14823.2.2.1.2.1.14.1.
wlsxSysExtStorageEntry Syntax wlsxSysExtStorageEntry Max-Access not-accessible Status current Description An entry for one long-term storage device contained by the controller. History Added in ArubaOS 2.3. sysExtStorageIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. History Added in ArubaOS 2.3. sysExtStorageType Syntax Integer ram(1) flashMemory(2) Max-Access read-only Status current Description Type of the storage.
sysExtStorageUsed Syntax Integer32 Max-Access read-only Status current Description Used storage in MB. History Added in ArubaOS 2.3. sysExtStorageName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Name of the storage file system. History Added in ArubaOS 2.3. wlsxSysExtMemoryTable The objects of the wlsx System External Memory table describe the memory utilization of the controller. Object Object ID wlsxSysExtMemoryEntry 1.3.6.1.4.1.14823.2.2.1.2.
wlsxSysExtMemoryEntry Syntax wlsxSysExtMemoryEntry Max-Access not-accessible Status current Description An entry for one memory region on the controller. Currently, only the control processor memory is monitored. History Added in ArubaOS 2.3. Update in ArubaOS 3.2.0.0.—description. sysExtMemoryIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. History Added in ArubaOS 2.3.
sysExtMemoryUsed Syntax Integer32 Max-Access read-only Status current Description Used memory in KB. History Added in ArubaOS 2.3. sysExtMemoryFree Syntax Integer32 Max-Access read-only Status current Description Free memory in KB. History Added in ArubaOS 2.3. wlsxSysExtCardTable The objects of the wlsx System External Card table list the different hardware modules in the controller. Table 85 wlsxSysExtCardTable Objects Object ID wlsxSysExtCardEntry 1.3.6.1.4.1.14823.2.2.1.2.1.16.
wlsxSysExtCardEntry Syntax wlsxSysExtCardEntry Max-Access not-accessible Status current Description An entry for one hardware module in the controller. History Added in ArubaOS 2.3. sysExtCardSlot Syntax Integer32 Max-Access not-accessible Status current Description Slot in which this card is located, offset by one. For the user-visible slot number, see sysExtCardUserSlot. History Added in ArubaOS 2.3.
Status current Description Number of fast ethernet ports on the card. History Added in ArubaOS 2.3. 306 | System External Dell PowerConnect W-Series ArubaOS 6.
sysExtCardNumOfGigPorts Syntax Integer32 Max-Access read-only Status current Description Number of gigabit ethernet ports on the card. History Added in ArubaOS 2.3. sysExtCardSerialNo Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Serial number of the card. History Added in ArubaOS 2.3. sysExtCardAssemblyNo Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Assembly number of the card. History Added in ArubaOS 2.
Status current Description Hardware revision of the card. History Added in ArubaOS 2.3. 308 | System External Dell PowerConnect W-Series ArubaOS 6.
sysExtCardFpgaRevision Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description FPGA revision number. History Added in ArubaOS 2.3. sysExtCardSwitchChip Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Switching chip version. History Added in ArubaOS 2.3. sysExtCardStatus Syntax ArubaActiveState Max-Access read-only Status current Description Status of the card. History Added in ArubaOS 2.3.
The objects of the wlsx System External Fan table list the fans of the controller. Table 86 wlsxSysExtFanTable OID Object Object ID wlsxSysExtFanEntry 1.3.6.1.4.1.14823.2.2.1.2.1.17.1 wlsxSysExtFanTable 1 sysExtFanIndex 1.3.6.1.4.1.14823.2.2.1.2.1.17.1 wlsxSysExtFanEntry 1 sysExtFanStatus 1.3.6.1.4.1.14823.2.2.1.2.1.17.2 wlsxSysExtFanEntry 2 wlsxSysExtFanEntry Syntax wlsxSysExtFanEntry Max-Access not-accessible Status current Description An entry for one fan. History Added in ArubaOS 2.
Status current Description The table of power supplies in the controller. History Added in ArubaOS 2.3. Table 87 wlsxSysExtPowerSupplyTable Object Object ID wlsxSysExtPowerSupplyEntry 1.3.6.1.4.1.14823.2.2.1.2.1.18.1 wlsxSysExtPowerSupplyTable 1 sysExtPowerSupplyIndex 1.3.6.1.4.1.14823.2.2.1.2.1.18.1.1 wlsxSysExtPowerSupplyEntry 1 sysExtPowerSupplyStatus 1.3.6.1.4.1.14823.2.2.1.2.1.18.1.2 wlsxSysExtPowerSupplyEntry 2 Dell PowerConnect W-Series ArubaOS 6.
wlsxSysExtPowerSupplyEntry Syntax wlsxSysExtPowerSupplyEntry Max-Access not-accessible Status current Description An entry for one power supply. History Added in ArubaOS 2.3. sysExtPowerSupplyIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. History Added in ArubaOS 2.3. sysExtPowerSupplyStatus Syntax ArubaActiveState Max-Access read-only Status current Description Status of the power supply. History Added in ArubaOS 2.3.
Table 88 wlsxSysExtSwitchListTable OIDs (Continued) Object Object ID sysExtSwitchIPAddress 1.3.6.1.4.1.14823.2.2.1.2.1.19.1.1 wlsxSysExtSwitchListEntry 1 sysExtSwitchRole 1.3.6.1.4.1.14823.2.2.1.2.1.19.1.2 wlsxSysExtSwitchListEntry 2 sysExtSwitchLocation 1.3.6.1.4.1.14823.2.2.1.2.1.19.1.3 wlsxSysExtSwitchListEntry 3 sysExtSwitchSWVersion 1.3.6.1.4.1.14823.2.2.1.2.1.19.1.4 wlsxSysExtSwitchListEntry 4 sysExtSwitchStatus 1.3.6.1.4.1.14823.2.2.1.2.1.19.
wlsxSysExtSwitchListEntry Syntax wlsxSysExtSwitchListEntry Max-Access not-accessible Status current Description Switch list entry. Index { sysExtSwitchIPAddress} History Added in ArubaOS 2.3. sysExtSwitchIPAddress Syntax IpAddress Max-Access not-accessible Status current Description IP address of the controller. History Added in ArubaOS 2.3. sysExtSwitchRole Syntax ArubaSwitchRole Max-Access read-only Status current Description Role of the switch. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description Software version the controller is running. History Added in ArubaOS 2.3. sysExtSwitchStatus Syntax ArubaActiveState Max-Access read-only Status current Description Status of the controller. History Added in ArubaOS 2.3. sysExtSwitchName Syntax DisplayString(Size(0..128)) Max-Access read-only Status current Description Host name of the controller. History Added in ArubaOS 2.3. sysExtSwitchSerNo Syntax DisplayString(Size(0..
Table 89 wlsxSysExtSwitchLicenseTable OIDs (Continued) Object Object ID sysExtLicenseKey 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.2 wlsxSysExtLicenseEntry 2 sysExtLicenseInstalled 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.3 wlsxSysExtLicenseEntry 3 sysExtLicenseExpires 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.4 wlsxSysExtLicenseEntry 4 sysExtLicenseFlags 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.5 wlsxSysExtLicenseEntry 5 sysExtLicenseService 1.3.6.1.4.1.14823.2.2.1.2.1.20.1.
wlsxSysExtLicenseEntry Syntax wlsxSysExtLicenseEntry Max-Access not-accessible Status current Description License entry. Index { sysExtLicenseIndex } History Added in ArubaOS 2.3. sysExtLicenseIndex Syntax Integer32 Max-Access not-accessible Status current Description License ID number. History Added in ArubaOS 2.3. sysExtLicenseKey Syntax DisplayString Max-Access read-only Status current Description License key. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description License expiry time. History Added in ArubaOS 2.3. sysExtLicenseFlags Syntax DisplayString Max-Access read-only Status current Description License flags E - enabled A - auto-generated R - reboot required to activate History Added in ArubaOS 2.3. sysExtLicenseService Syntax DisplayString Max-Access read-only Status current Description The service enabled by this license. History Added in ArubaOS 2.3.
wlsxSysExtStorageEntry Syntax wlsxSysExtStorageEntry Max-Access not-accessible Status current Description An entry for one long-term storage device contained by the controller. Index { sysExtStorageIndex } sysExtStorageIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. sysExtStorageType Syntax Integer ram(1) flashMemory(2) Max-Access read-only Status current Description Type of the storage.
sysExtStorageName Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description Name of the storage file system. wlsxSysExtMemoryTable The objects of the wlsx System External Memory table contain the memory status of the controller. Table 91 wlsxSysExtMemoryTable OIDs Object Object ID wlsxSysExtMemoryEntry 1.3.6.1.4.1.14823.2.2.1.2.1.15.1 wlsxSysExtMemoryTable 1 sysExtMemoryIndex 1.3.6.1.4.1.14823.2.2.1.2.1.15.1.1 wlsxSysExtMemoryEntry 1 sysExtMemorySize 1.3.6.1.4.1.
wlsxSysExtMemoryEntry Syntax wlsxSysExtMemoryEntry Max-Access not-accessible Status current Description An entry for one memory region on the controller. Currently, only the CP region is monitored. Index { sysExtMemoryIndex } sysExtMemoryIndex Syntax Integer32 Max-Access not-accessible Status current Description Index of the table. sysExtMemorySize Syntax Integer32 Max-Access read-only Status current Description Total memory in KB.
wlsxSystemExtTableGenNumberGroup The objects of the wlsx System External Table Generated Number group list the number of modifications that occurred since the last reboot. Table 92 wlsxSystemExtTableGenNumberGroup OIDs Object Object ID wlsxSysExtUserTableGenNumber 1.3.6.1.4.1.14823.2.2.1.2.2.1 wlsxSystemExtTableGenNumberGroup 1 wlsxSysExtAPBssidTableGenNumber 1.3.6.1.4.1.14823.2.2.1.2.2.2 wlsxSystemExtTableGenNumberGroup 2 wlsxSysExtAPRadioTableGenNumber 1.3.6.1.4.1.14823.2.2.1.2.2.
wlsxSysExtAPRadioTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the radio table was modified since reboot. History Added in version 3.1 wlsxSysExtAPTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the AP table was modified since reboot. History Added in version 3.1.
wlsxSysExtVlanTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the VLAN table was modified since reboot. History Added in version 3.1. wlsxSysExtVlanInterfaceTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the VLAN Interface table was modified since reboot. History Added in version 3.1.
wlsxSysExtMonStationTableGenNumber Syntax Integer32 Max-Access read-only Status current Description This object denotes the number of times the monitored station table was modified since reboot. History Added in version 3.1 Dell PowerConnect W-Series ArubaOS 6.
| System External Dell PowerConnect W-Series ArubaOS 6.
Chapter 14 Textual Conventions This chapter provides information about the Textual Conventions, which define the data structures of Dell object types. Textual Conventions are found in the file aruba-tc.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Note: Textual Conventions do not have OIDs. Following is a list of the Textual Conventions, which are described below.
ArubaEnableValue Syntax Integer enable(1) disable(2) Status current Description Represents a flag which is either enabled or disabled. ArubaFrameType Syntax Integer associateRequest(0) associateResponse(1) reassociateRequest(2) reassociateResponse(3) probeRequest(4) probeResponse(5) beacon(8) atim(9) disassociate(10) auth(11) deauth(12) Status current Description Represents the frame type. History Updated in ArubaOS 3.
Description Represents the HT status of the access point or client. History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
ArubaHTExtChannel Syntax Integer none(1) above(2) below(3) } Description Represents the extension channel offset relative to the current channel. Status current History Added in ArubaOS 3.3.0.0. ArubaSwitchRole Syntax Integer master(1) local(2) backupmaster(3) Status current Description Represents the role of the controller. ArubaSupportStatus Syntax Integer unsupported(1) supported(2) Status current Description Represents if a feature is supported or unsupported.
Description Represents both the source and destination to which an ACL rule will be applied. Dell PowerConnect W-Series ArubaOS 6.
ArubaACLNetworkServiceType Syntax Integer alias(1) any(2) tcp(3) udp(4) protocol(5) Status current Description Represents the network service in an ACL Rule. ArubaACLAction Syntax Integer deny(1) permit(2) srcNAT(3) dstNAT(4) redirect(5) Status current Description Represents the actions in an ACL rule. ArubaDaysOfWeek Syntax Integer sun(1) mon(2) tue(3) wed(4) thu(5) fri(6) sat(7) Status current Description Represents the actions of an ACL rule.
ArubaAuthenticationMethods Syntax Integer none(0) web(1) mac(2) vpn(3) dot1x(4) kerberos(5) secureId(7) pubcookie(15) xSec(16) xSecMachine(17) other(255) Status current Description Authentication method. ArubaSubAuthenticationMethods Syntax Integer authPAP(1) authCHAP(2) authMSCHAP(3) authMSCHAPv2(4) eapTLS(5) eapTTLS(6) eapLEAP(7) eapMD5(8) Status current Description Sub-authentication (e.g., EAP type).
ArubaStationType Syntax Integer valid(1) interfering(2) dos(3) Status current Description Represents the station type. ArubaEncryptionMethods Syntax Bits disabled(0) static-wep(1) dynamic-wep(2) static-wpa(3) dynamic-wpa(4) wpa2-psk-aes(5) wpa2-8021x-aes(6) wpa2PreAuth(7) xsec(8) wpa-psk-aes(9) wpa-aes(10) wpa2-psk-tkip(11) wpa2-8021x-tkip(12) Status current Description Represents the actions in an ACL rule. History Updated in ArubaOS 3.
ArubaPortMode Syntax Integer access(1) dot1q(2)} Status current Description Represents the switch port mode. ArubaDot1dState Syntax Integer disabled(1), blocked(2), listening(3), learning(4), forwarding(5) Status current Description Represents the switch port mode. History Updated in ArubaOS 3.1—syntax, addition of items (2)–(5) ArubaPoeState Syntax Integer disabled(1) enabled(2) enabledCisco(3) Status current Description Represents the switch port mode.
History 336 | Textual Conventions Updated in ArubaOS 3.1—syntax, addition of items (8)–(11) Dell PowerConnect W-Series ArubaOS 6.
ArubaESIServerMode Syntax Integer bridged(1) routed(2) nat(3) Status current Description The mode of the ESI server. History Updated in ArubaOS 3.1—addition of nat(3) ArubaESIServerStatus Syntax Integer up(1) down(2) Status current Description The status of the ESI server. ArubaIfType Syntax Integer port(1) VLAN(2) tunnel(3) loopback(4) Status current Description The type interface referred to by the value of ifIndex.
ArubaAccessPointMode Syntax Integer airMonitor(1), accessPoint(2), accessPointAndMonitor(3) meshPortal(4) meshPoint(5) Status current Description The mode of the access point. History Update in ArubaOS 3.2.0.0.—addition of items (4) and (5) in Syntax. ArubaAuthServerType Syntax Integer internaldb(1) radius(2) ldap(3) kerberos(4) tacacs(5) Status current Description The mode of the access point.
ArubaDBType Syntax Integer mssql(1) mysql(2) Status current Description Database type. ArubaVrrpState Syntax Integer initialize(1) backup(2) master(3) Status current Description Database type. ArubaOperStateValue Syntax Integer up(1) down(2) testing(3) Syntax current Description Represents operational state of an interface. ArubaAntennaSetting Syntax Integer notPresent(1) enabled(2) disabled(3) Syntax current Description Represents the status of the external antenna.
ArubaPortSpeed Syntax Integer speed10Mbps(1) speed100Mbps(2) speed1000Mbps(3) speedAuto(4) speed10Gbps(5) Status current Description Port speed. History Update in ArubaOS 3.2.0.0.—addition of item (5) in Syntax. ArubaPortDuplex Syntax Integer half(1) full(2) auto(3) Status current Description Port duplexity. ArubaPortType Syntax Integer fastethernet(1) gigabitethernet(2) xgigabitethernet(3) Status current Description Port type. History Update in ArubaOS 3.2.0.0.
ArubaUnprovisionedStatus Syntax Integer yes(1) no(2) Status current Description Represents whether the AP is provisioned or not. ArubaMonitorMode Syntax Integer Status current Description Represents whether the AP has any radios dedicated to monitoring. ArubaConfigurationState Syntax Integer success(1), error(2) Status current Description Configuration transfer types. History Added in ArubaOS 3.
ArubaCallStates Syntax Integer idle(0) initiated(1) connecting(2) delivered(3) connected(4) offered(5) alerting(6) releasing(7) cancelling(8) transient(9) dummy503(10) succ(11), fail(12) aborted(13) blocked(14) Status current Description The call state. History Added in ArubaOS 3.1 ArubaVoipProtocol Syntax Integer sccp(1) svp(2) vocera(3) sip(9) ua(11) Status current Description VoIP protocol used. History Added in ArubaOS 3.
ArubaVoiceCdrDirection Syntax Integer og(0) ic(1) Status current Description VoIP CDR direction. History Added in ArubaOS 3.1 ArubaVoiceCacBit Syntax Bits cacActiveLoadBalancing(0) cacHighCapThresholdReached(1) cacHandRsrvThresholdReached(2) cacPeakCapacityReached(3) Status current Description Voice CAC bit flags. History Added in ArubaOS 3.1 ArubaMeshRole Syntax Integer nonmesh(0) point(1) portal(2) Status current Description Mesh role. History Added in ArubaOS 3.2.0.0.
ArubaHTRate Syntax Integer unknown(0) ht6dot5(1) ht13(2) ht13dot5(3) ht15(4) ht19dot5(5) ht26(6) ht27(7) ht30(8) ht39(9) ht40dot5(10) ht45(11) ht52(12) ht54(13) ht58dot5(14) ht60(15) ht65(16) ht78(17) ht81(18) ht90(19) ht104(20) ht108(21) ht117(22) ht120(23) ht121dot5(24) ht130(25) ht135(26) ht150(27) ht162(28) ht180(29) ht216(30) ht240(31) ht243(32) ht270(33) ht300(34) Status current Description Represents HT rate. History Added in ArubaOS 3.2.0.0.
Chapter 15 Traps This module defines the Traps that can be generated by the controller. Traps are MIB objects (variables) that transmit information to the SNMP Manager when an event occurs. Traps are included as varbinds (variable bindings) in the trap protocol data unit (PDU). Varbinds are defined in the Description section below. Figure 16 shows the architecture of the Traps MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Traps are listed in the file aruba-trap.
wlsx Trap Objects Group Table 93 wlsxTraps Object Group OIDs 346 | Traps Object Object ID wlsxTrapAPMacAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.1 wlsxTrapObjectsGroup 1 wlsxTrapAPIpAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.2 wlsxTrapObjectsGroup 2 wlsxTrapAPBSSID 1.3.6.1.4.1.14823.2.3.1.11.1.1.3 wlsxTrapObjectsGroup 3 wlsxTrapEssid 1.3.6.1.4.1.14823.2.3.1.11.1.1.4 wlsxTrapObjectsGroup 4 wlsxTrapTargetAPBSSID 1.3.6.1.4.1.14823.2.3.1.11.1.1.5 wlsxTrapObjectsGroup 5 wlsxTrapTargetAPSSID 1.3.6.1.
Table 93 wlsxTraps Object Group OIDs (Continued) Object Object ID wlsxTrapStationBlackListReason 1.3.6.1.4.1.14823.2.3.1.11.1.1.34 wlsxTrapObjectsGroup 34 wlsxTrapSpoofedIpAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.35 wlsxTrapObjectsGroup 35 wlsxTrapSpoofedOldPhyAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.36 wlsxTrapObjectsGroup 36 wlsxTrapSpoofedNewPhyAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.37 wlsxTrapObjectsGroup 37 wlsxTrapDBName 1.3.6.1.4.1.14823.2.3.1.11.1.1.
Table 93 wlsxTraps Object Group OIDs (Continued) 348 | Traps Object Object ID wlsxTrapUpdateFailedObj 1.3.6.1.4.1.14823.2.3.1.11.1.1.68 wlsxTrapObjectsGroup 68 wlsxTrapTableEntryChangeType 1.3.6.1.4.1.14823.2.3.1.11.1.1.69 wlsxTrapObjectsGroup 69 wlsxTrapGlobalConfigObj 1.3.6.1.4.1.14823.2.3.1.11.1.1.70 wlsxTrapObjectsGroup 70 wlsxTrapTableGenNumber 1.3.6.1.4.1.14823.2.3.1.11.1.1.71 wlsxTrapObjectsGroup 71 wlsxTrapLicenseId 1.3.6.1.4.1.14823.2.3.1.11.1.1.
Table 93 wlsxTraps Object Group OIDs (Continued) Object Object ID wlsxTrapAPChannelSec 1.3.6.1.4.1.14823.2.3.1.11.1.1.102 wlsxTrapObjectsGroup 102 wlsxTrapUserAttributeChangeType 1.3.6.1.4.1.14823.2.3.1.11.1.1.103 wlsxTrapObjectsGroup 103 wlsxTrapAPMacAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the trap to indicate the wired MAC address of an access point.
Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the BSSID of the access point for which we are raising the trap. If an air monitor is sending the trap, this will indicate AP. If an access point is sending the trap, then it will point to itself. wlsxTrapTargetAPSSID Syntax DisplayString(Size(0..
wlsxReceiverMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the receiver. wlsxTrapTransmitterMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the MAC address of the transmitter.
Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the frame type. wlsxTrapAddressType Syntax ArubaAddressType Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the address type. wlsxTrapAPLocation Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the location of the AP.
Description This object is used in the traps to indicate the MAC address. wlsxTrapMatchedIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the IP address. wlsxTrapRogueIfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBUI Rogue AP information URL.
wlsxTrapAuthServerName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the authentication server used for authentication. wlsxTrapAuthServerTimeout Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the authentication server timeout.
Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the fan number. wlsxTrapVoltageType Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the type of voltage. wlsxTrapVoltageValue Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the voltage value in float.
Description This object is used in a trap to identify an old MAC address. wlsxTrapSpoofedNewPhyAddress Syntax MacAddress Max-Access accessible-for-notify Status current Description This object is used in a trap to identify a new MAC address. wlsxTrapDBName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used in a trap to identify the name of the database. wlsxTrapDBUserName Syntax DisplayString(Size(0..
wlsxTrapVrrpID Syntax Integer32 Max-Access accessible-for-notify Status current Description This object contains the virtual router identifier. wlsxTrapVrrpMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object contains the master IP address. wlsxTrapVrrpOperState Syntax ArubaVrrpState Max-Access accessible-for-notify Status current Description This object represents the VRRP operational state.
Max-Access accessible-for-notify Status current Description This object represents the External Services Interface (ESI) server IP address. wlsxTrapLicenseDaysRemaining Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the number of days remaining prior to a license expiry. wlsxTrapSwitchIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the controller IP address.
Description This object represents the MAC address of the user. wlsxTrapUserName Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the user name. wlsxTrapUserRole Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the authentication method of the user.
wlsxTrapInterferingAPInfoURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object is used to point to the WEBGUI Rogue interfering access point information URL. wlsxTrapPortNumber Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the port number.
wlsxTrapConfigurationId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the ID of the configuration used in traps. History Added in ArubaOS 3.1.0.0. wlsxTrapCTSURL Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the URL from which the transfer should happen. History Added in ArubaOS 3.1.0.0. wlsxTrapCTSTransferType Syntax DisplayString(Size(0..
Status current Description This object represents the reason for the update failure. History Added in ArubaOS 3.1.0.0. wlsxTrapUpdateFailedObj Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This variable represents the AMAPI object which is the reason for the update failure. History Added in ArubaOS 3.1.0.0.
wlsxTrapLicenseId Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the license ID. History Added in ArubaOS 3.1.0.0. wlsxTrapConfidenceLevel Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the confidence level as a percentage. History Added in ArubaOS 3.1.0.0. wlsxTrapMissingLicenses Syntax DisplayString(Size(0..
Status current Description This object represents the tunnel ID. History Added in ArubaOS 3.1.0.0. wlsxTrapTunnelStatus Syntax Integer32 Max-Access accessible-for-notify Status current Description This object represents the tunnel status. History Added in ArubaOS 3.1.0.0. wlsxTrapTunnelUpReason Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the tunnel up reason. History Added in ArubaOS 3.1.0.0.
wlsxTraptimeStr Syntax DisplayString(Size(0..64)) Max-Access accessible-for-notify Status current Description This object represents the Time in String format. History Added in ArubaOS 3.4. wlsxTrapMasterIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the master IP address. History Added in ArubaOS 3.4.
Status current Description This object represents the local controller name. History Added in ArubaOS 3.4.1 wlsxTrapPrimaryControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's primary controller. History Added in ArubaOS 3.4.1 wlsxTrapBackupControllerIp Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of the AP's backup controller.
wlsxTrapDeviceIpAddress Syntax IpAddress Max-Access accessible-for-notify Status current Description This object represents the IP address of a device seen by an AP. History Added in ArubaOS 6.0 wlsxTrapDeviceMac Syntax MacAddress Max-Access accessible-for-notify Status current Description This object represents the MAC address of a device seen by an AP. History Added in ArubaOS 6.
Status current Description This object is used in the traps to indicate the Name of the AP. History Added in ArubaOS 6.0 wlsxTrapApMode Syntax Integer32 Max-Access accessible-for-notify Status current Description This Object represents the AP Mode. History Added in ArubaOS 6.0 wlsxTrapAPPrevChannel Syntax Integer32 Max-Access accessible-for-notify Status current Description This object is used in the traps to indicate the Previous Channel. History Added in ArubaOS 6.
wlsxTrapAPCurMode Syntax wlsxTrapAPCurMode Max-Access accessible-for-notify Status current Description This Object represents the APs Current Mode. History Added in ArubaOS 6.0 wlsxTrapAPPrevMode Syntax ArubaAccessPointMode Max-Access accessible-for-notify Status current Description This Object represents the APs Previous Mode. History Added in ArubaOS 6.
| Traps Status current Description This object represents type of the configuration change. History Added in ArubaOS 6.0 Dell PowerConnect W-Series ArubaOS 6.
wlsx Trap Definitions Group Table 94 wlsx Trap Definitions Group OIDs Object Object ID wlsxVLANLinkUp 1.3.6.1.4.1.14823.2.3.1.11.1.2.1000 wlsxTrapDefinitionsGroup 1000 wlsxVLANLinkDown 1.3.6.1.4.1.14823.2.3.1.11.1.2.1001 wlsxTrapDefinitionsGroup 1001 wlsxSignatureMatch 1.3.6.1.4.1.14823.2.3.1.11.1.2.1002 wlsxTrapDefinitionsGroup 1002 wlsxNodeRateAnomaly 1.3.6.1.4.1.14823.2.3.1.11.1.2.1003 wlsxTrapDefinitionsGroup 1003 wlsxNormalTemperature 1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 94 wlsx Trap Definitions Group OIDs (Continued) 372 | Traps Object Object ID wlsxNProcessExceedsMemoryLimits 1.3.6.1.4.1.14823.2.3.1.11.1.2.1033 wlsxTrapDefinitionsGroup 1033 wlsxNLowOnFlashSpace 1.3.6.1.4.1.14823.2.3.1.11.1.2.1034 wlsxTrapDefinitionsGroup 1034 wlsxNLowMemory 1.3.6.1.4.1.14823.2.3.1.11.1.2.1035 wlsxTrapDefinitionsGroup 1035 wlsxNFanTrayRemoved 1.3.6.1.4.1.14823.2.3.1.11.1.2.1036 wlsxTrapDefinitionsGroup 1036 wlsxNFanTrayInserted 1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 94 wlsx Trap Definitions Group OIDs (Continued) Object Object ID wlsxWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.11.1.2.1067 wlsxTrapDefinitionsGroup 1067 wlsxChannelInterferenceDetected 1.3.6.1.4.1.14823.2.3.1.11.1.2.1068 wlsxTrapDefinitionsGroup 1068 wlsxChannelInterferenceCleared 1.3.6.1.4.1.14823.2.3.1.11.1.2.1069 wlsxTrapDefinitionsGroup 1069 wlsxAPInterferenceDetected 1.3.6.1.4.1.14823.2.3.1.11.1.2.1070 wlsxTrapDefinitionsGroup 1070 wlsxAPInterferenceCleared 1.3.6.1.4.1.14823.2.3.
Table 94 wlsx Trap Definitions Group OIDs (Continued) 374 | Traps Object Object ID wlsxStaRepeatWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.11.1.2.1101 wlsxTrapDefinitionsGroup 1101 wlsxStaWeakWEPIVViolation 1.3.6.1.4.1.14823.2.3.1.11.1.2.1102 wlsxTrapDefinitionsGroup 1102 wlsxStaAssociatedToUnsecureAP 1.3.6.1.4.1.14823.2.3.1.11.1.2.1103 wlsxTrapDefinitionsGroup 1103 wlsxStaUnAssociatedFromUnsecureAP 1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 94 wlsx Trap Definitions Group OIDs (Continued) Object Object ID wlsxSignStaNetstumbler 1.3.6.1.4.1.14823.2.3.1.11.1.2.1135 wlsxTrapDefinitionsGroup 1135 wlsxSignAPAsleap 1.3.6.1.4.1.14823.2.3.1.11.1.2.1136 wlsxTrapDefinitionsGroup 1136 wlsxSignStaAsleap 1.3.6.1.4.1.14823.2.3.1.11.1.2.1137 wlsxTrapDefinitionsGroup 1137 wlsxSignAPAirjack 1.3.6.1.4.1.14823.2.3.1.11.1.2.1138 wlsxTrapDefinitionsGroup 1138 wlsxSignStaAirjack 1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 94 wlsx Trap Definitions Group OIDs (Continued) 376 | Traps Object Object ID wlsxNApOnBackupController 1.3.6.1.4.1.14823.2.3.1.11.1.2.1169 wlsxTrapDefinitionsGroup 1169 wlsxClientFloodAttack 1.3.6.1.4.1.14823.2.3.1.11.1.2.1170 wlsxTrapDefinitionsGroup 1170 wlsxValidClientNotUsingEncryption 1.3.6.1.4.1.14823.2.3.1.11.1.2.1171 wlsxTrapDefinitionsGroup 1171 wlsxAdhocUsingValidSSID 1.3.6.1.4.1.14823.2.3.1.11.1.2.1172 wlsxTrapDefinitionsGroup 1172 wlsxAPSpoofingDetected 1.3.6.1.4.1.14823.
Table 94 wlsx Trap Definitions Group OIDs (Continued) Object Object ID wlsxNSignatureMatchAirjack 1.3.6.1.4.1.14823.2.3.1.11.1.2.1203 wlsxTrapDefinitionsGroup 1203 wlsxNSignatureMatchNullProbeResp 1.3.6.1.4.1.14823.2.3.1.11.1.2.1204 wlsxTrapDefinitionsGroup 1204 wlsxNSignatureMatchDeauthBcast 1.3.6.1.4.1.14823.2.3.1.11.1.2.1205 wlsxTrapDefinitionsGroup 1205 wlsxNSignatureMatchDisassocBcast 1.3.6.1.4.1.14823.2.3.1.11.1.2.1206 wlsxTrapDefinitionsGroup 1206 wlsxNSignatureMatchWellenreiter 1.3.6.
Description This trap indicates that a signature match is detected. NOTE: This trap has been deprecated in ArubaOS 6.0. Instead, use the wlsxNSignatureMatch trap. wlsxNodeRateAnomaly Objects wlsxTrapFrameType, wlsxTrapNodeMac, wlsxTrapSnr, wlsxTrapAPBSSID, wlsxTrapAPLocation Status deprecated Description This trap indicates that a node is exceeding the threshold set for the frame type. NOTE: This trap has been deprecated in ArubaOS 6.0.
wlsxFanOK Objects wlsxTrapFanNumber Status current Description This trap indicates that the fan has returned to normal. wlsxInRangeVoltage Objects wlsxTrapVoltageType, wlsxTrapVoltageValue Status current Description This trap indicates that the switch voltage is back within range. wlsxCoverageHoleResolved Objects wlsxTrapAPBSSID, wlsxTrapAPLocation, wlsxTrapNodeMac Status current Description This trap indicates that a coverage hole at location wlsxTrapAPLocation has been resolved.
wlsxNUserEntryDeleted Objects wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress Status current Description This trap indicates that a user is deleted. History Added in ArubaOS 3.1.0.0. wlsxNUserEntryAuthenticated Objects wlsxTrapUserIpAddress, wlsxTrapUserPhyAddress, wlsxTrapUserName, wlsxTrapUserAuthenticatio Method, wlsxTrapUserRole Status current Description This trap indicates that a user is authenticated. History Added in ArubaOS 3.1.0.0.
wlsxNAuthServerTimedOut Objects wlsxTrapAuthServerName, wlsxTrapAuthServerTimeout Status current Description This trap indicates that the authentication server timed out. History Added in ArubaOS 3.1.0.0. wlsxNAuthServerIsUp Objects wlsxTrapAuthServerName Status current Description This trap indicates that an authentication server is up. History Added in ArubaOS 3.1.0.0.
wlsxNFanFailure Objects wlsxTrapFanNumber Status current Description This trap indicates that the fan has failed. History Added in ArubaOS 3.1.0.0. wlsxNOutOfRangeVoltage Objects wlsxTrapVoltageType, wlsxTrapVoltageValue Status current Description This trap indicates that the controller received out-of-range voltage. History Added in ArubaOS 3.1.0.0.
Description This trap indicates that a GBIC is inserted in a line card. History Added in ArubaOS 3.1.0.0. wlsxNProcessDied Objects wlsxTrapProcessName Status current Description This trap indicates that a process has died. History Added in ArubaOS 3.1.0.0. wlsxNProcessExceedsMemoryLimits Objects wlsxTrapProcessName Status deprecated Description This trap indicates that a process is consuming large amounts of memory. History Added in ArubaOS 3.1.0.0. This trap is deprecated in ArubaOS 3.4.
wlsxNFanTrayInserted Status current Description This trap indicates that a fan tray is inserted. History Added in ArubaOS 3.1.0.0. wlsxNLCRemoved Objects wlsxTrapCardSlot Status current Description This trap indicates that a line card is removed. History Added in ArubaOS 3.1.0.0. wlsxNPowerSupplyMissing Status current Description This trap indicates that the power supply is missing. History Added in ArubaOS 3.1.0.0.
Description This trap indicates that an access point at location wlsxTrapAPLocation has detected a coverage hole. History Added in ArubaOS 3.1.0.0. wlsxNChannelChanged Objects wlsxTrapAPBSSID, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an access point at location wlsxTrapAPLocation has changed the channel. History Added in ArubaOS 3.1.0.0.
Description This trap indicates that communication with the database failed. History Added in ArubaOS 3.1.0.0. wlsxNVrrpStateChange Objects { wlsxTrapVrrpID, wlsxTrapVrrpMasterIp wlsxTrapVrrpOperState } Status current Description This trap indicates that VRRP state has changed on the controller.
Status current Description This trap indicates that an unsecure access point is detected by an air monitor. The AP is declared unsecure, because it is matched to a configured MAC address or IP address. wlsxUnsecureAPResolved Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that a previously detected unsecure access point is no longer present in the network.
wlsxOUIMisconfiguration Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected an access point that has a bad OUI configuration.
Description This trap indicates that a previously detected ad hoc network is no longer present in the network. NOTE: This trap has been deprecated in ArubaOS 6.0 wlsxStaPolicyViolation Objects { wlsxTrapTargetAPBSSID, wlsxTrapNodeMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that a valid station policy is violated.
Status current Description This trap indicates that an air monitor has detected an AP interference on a channel. wlsxAPInterferenceCleared Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that a previously detected AP interference no longer present.
wlsxFrameFragmentationRateExceeded Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapTargetAPChannel, wlsxTrapAPLocation } Status current Description This trap indicates that an air monitor is reporting that an AP has exceeded an upper threshold for frame fragmentation rate for AP.
wlsxLoadbalancingDisabled Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor is reporting that an AP has enabled load balancing.
wlsxSignatureMatchSta Objects { wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status deprecated Description This trap indicates that we detected a signature match from a station. NOTE: This trap has been deprecated in ArubaOS 6.0. Instead, use the wlsxNSignatureMatch trap.
wlsxSignalAnomaly Objects { wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected a signal anomaly.
wlsxAdhocNetwork Objects { wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status deprecated Description This trap indicates that an air monitor detected an ad hoc network. A station is connected to an ad hoc AP. NOTE: This trap has been deprecated in ArubaOS 6.0. Instead, use the wlsxNAdhocNetwork trap.
wlsxStaRepeatWEPIVViolation Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapNodeMac, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected a repeat WEP-IV violation for a station.
wlsxInterferingApDetected Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel, wlsxTrapInterferingAPInfoURL } Status current Description This trap indicates that an interfering access point is detected by an air monitor located at wlsrLocation on channel wlsrCurrentChannel. History Added in ArubaOS 3.1.0.0.
wlsxWarmStart Status current wlsxAPImpersonation Objects { wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an air monitor detected station impersonation. wlsxInformQueueOverFlow Objects { wlsxTrapHostIp, wlsxTrapHostPort } Status current Description This trap indicates that an inform queue overflow condition occurred.
wlsxConfigurationUpdateError Objects { wlsxTrapTime, wlsxTrapConfigurationId, wlsxTrapUpdateFailureReason, wlsxTrapUpdateFailedObj } Status current Description This trap indicates the configuration update status. History Added in ArubaOS 3.1.0.0. wlsxConfigurationUpdateSucceeded Objects { wlsxTrapTime, wlsxTrapConfigurationId } Status current Description This trap indicates the configuration update status. History Added in ArubaOS 3.1.0.0.
wlsxAPRadioEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapTableEntryChangeType } Status current Description This trap indicates that the radio configuration has changed. History Added in ArubaOS 3.1.0.0. wlsxAPEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber, wlsxTrapAPMacAddress, wlsxTrapTableEntryChangeType } Status current Description This trap indicates that the AP configuration has changed.
wlsxVlanInterfaceEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber, wlsxTrapVlanId, wlsxTrapTableEntryChangeType } Status current Description This trap indicates that the VLAN Interface configuration has changed. History Added in ArubaOS 3.1.0.0.
History Added in ArubaOS 3.1.0.0. NOTE: This trap has been deprecated in ArubaOS 6.0. wlsxMonStationEntryChanged Objects { wlsxTrapTime, wlsxTrapTableGenNumber, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapNodeMac, wlsxTrapTableEntryChangeType } Status deprecated Description This trap indicates that a monitored station entry changed. History Added in ArubaOS 3.1.0.0. NOTE: This trap has been deprecated in ArubaOS 6.0.
wlsxSignAPAsleap Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status deprecated Description This trap indicates that the system detected a signature match for ASLEAP from an AP. For more information refer to: http://www.wve.org/entries/show/WVE-2005-0027 History Added in ArubaOS 3.1.0.0. NOTE: This trap has been deprecate in ArubaOS 6.0.
wlsxSignStaAirjack Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status deprecated Description This trap indicates that the system detected a signature match for AirJack from a station. For more information refer to: http://www.wve.org/entries/show/WVE-2005-0018 History Added in ArubaOS 3.1.0.0. NOTE: This trap has been deprecated in ArubaOS 6.0. Instead, use the wlsxNSignatureMatchAirjack trap.
History Added in ArubaOS 3.1.0.0. NOTE: This trap has been deprecated in ArubaOS 6.0. Instead, use the wlsxNSignatureMatchDeauthBcast trap. wlsxSignStaDeauthBcast Objects { wlsxTrapTime, wlsxTrapSignatureName, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status deprecated Description This trap indicates that the system detected a signature match for Deauth-Broadcast from a station. For more information refer to: http://www.wve.
wlsxAdhocNetworkBridgeDetectedAP Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status deprecated Description This trap indicates that an air monitor has detected an ad hoc network that is bridging to a wired network. History Added in ArubaOS 3.1.0.0. NOTE: This trap has been deprecated in ArubaOS 6.0. Instead, use the wlsxNAdhocNetworkBridgeDetectedAP trap.
wlsxDisconnectStationAttackSta Objects { wlsxTrapTime, wlsxTrapFrameType, wlsxTrapSourceMac, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation } Status deprecated Description This trap indicates that an air monitor detected a station disconnect attack. For more information refer to: http://www.wve.org/entries/show/WVE-2005-0045 http://www.wve.org/entries/show/WVE-2005-0046 http://www.wve.org/entries/show/WVE-2005-0048 History Added in ArubaOS 3.1.0.0.
wlsxConfigurationLicenseMismatch Objects { wlsxTrapTime, wlsxTrapConfigurationId, wlsxTrapMissingLicenses } Status current Description This trap indicates the configuration update status in the case where some configuration could not be applied due to missing licenses. History Added in ArubaOS 3.1.0.0. wlsxVoiceCdrBufferThresholdReached Objects { wlsxTrapTime, wlsxVoiceCurrentNumCdr } Status current Description This trap indicates that the CDR buffer threshold has been reached.
wlsxHtGreenfieldSupported Objects { wlsxTrapTime, wlsxTrapTargetAPBSSID,wlsxTrapTargetAPSSID, wlsxTrapAPMacAddress,wlsxTrapAPRadioNumber, wlsxTrapAPLocation,wlsxTrapAPChannel } Status current Description This trap indicates that an AP/AM detected an AP that can supported HT Greenfield mode. History Added in ArubaOS 3.3.0.0.
wlsxNAdhocNetwork Objects { wlsxTrapTime, wlsxTrapSourceMac, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel } Status current Description This trap indicates that an AM detected an Ad hoc Network. An Station is connected to an ad hoc AP. History Added in ArubaOS 3.4.
wlsxNVpnMaxSessions Objects { wlsxTrapTime } Status current Description A trap which indicates that the VPN session limit is reached. History Added in ArubaOS 3.4.1 wlsxNRapExpiredPSK Objects { wlsxTrapTime, wlsxTrapAPIpAddress, wlsxTrapApSerialNumber } Status current Description A trap which indicates that the RAP is using the Expired PSK. History Added in ArubaOS 3.4.
wlsxClientFloodAttack Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation Status current Description This trap indicates that the number of potential fake clients detected by an AP has exceeded the configured IDS threshold. This is the total number of fake clients observed across all bands. For more info check:http://www.wve.org/entries/show/WVE-2005-0056 History Added in ArubaOS 6.
wlsxClientAssociatingOnWrongChannel Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapSpoofedFrameType, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a client trying to associate to one of its BSSIDs on the wrong channel.
wlsxTKIPReplayAttack Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a TKIP replay attack. If successful this could be the precursor to more advanced attacks. For more info check:http://www.wve.org/entries/show/WVE-2008-0013 History Added in ArubaOS 6.
wlsxValidClientMisassociation Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapNodeMac, wlsxTrapAssociationType, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a misassociation between a valid client and an unsafe AP. History Added in ArubaOS 6.
wlsxOverflowEAPOLKeyDetected Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapSourceMac, wlsxTrapReceiverMac, wlsxTrapTargetAPBSSID, wlsxTrapAPChannel, wlsxTrapSnr Status current Description This trap indicates that an AP detected a key in an EAPOL Key message with a specified length greater than the length of the entire message. For more info check:http://www.wve.org/entries/show/WVE-2008-0009 History Added in ArubaOS 6.
wlsxCTSRateAnomaly Objects wlsxTrapTime, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that the rate of CTS packets received by an AP exceeds the configured IDS threshold. History Added in ArubaOS 6.
wlsxNInterferingAPDetected Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTargetAPSSID, wlsxTrapAPChannel Status current Description This trap indicates that an access point has been classified as Interfering by the system. The access point is declared Interfering because it is not authorized, nor has it been classified as a Rogue. History Added in ArubaOS 6.
Status current Description This trap indicates that a new AP has appeared immediately following a client probe request.This is indicative of the Hotspotter tool or similar that attempts to trap clients with a fake hotspot or other wireless network. For more info check:http://www.wve.org/entries/show/WVE-2005-0054 History Added in ArubaOS 6.
wlsxNSignatureMatchAirjack Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match for Airjack in a frame. For more info check:http://www.wve.org/entries/show/WVE-2005-0018 History Added in ArubaOS 6.
wlsxNSignatureMatchWellenreiter Objects wlsxTrapTime, wlsxTrapTargetAPBSSID, wlsxTrapTransmitterMac, wlsxTrapReceiverMac, wlsxTrapSignatureName, wlsxTrapSnr, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPChannel Status current Description This trap indicates that an AP detected a signature match for Wellenreiter in a frame. For more info check:http://www.wve.org/entries/show/WVE-2006-0058 History Added in ArubaOS 6.
Status current Description This trap indicates that an AP has attempted to contain a client by disrupting traffic to it on the wired interface. History Added in ArubaOS 6.
wlsxAPChannelChange Objects wlsxTrapTime, wlsxTrapAPChannel, wlsxTrapAPChannelSec, wlsxTrapAPPrevChannel, wlsxTrapAPPrevChannelSec, wlsxTrapAPMacAddress, wlsxTrapAPRadioNumber, wlsxTrapAPLocation, wlsxTrapAPARMChangeReason Status current Description This trap indicates that an AP changed its channel. History Added in ArubaOS 6.
| Traps Dell PowerConnect W-Series ArubaOS 6.
Chapter 16 User The User module provides information about the user, the party connected to the controller. Information includes the total number of users, name and access-level of the user, the physical location of the user’s station, and so on. User MIBs support IPv4. For IPv6 support, see Chapter 17 on page 445. Figure 17 shows the architecture of the User MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The User MIBs are listed in the file aruba-user.my.
Table 95 User MIB Tables (Continued) Table Description wlsxUserSessionTimeTable This table lists the user session time counts on an ESSID. The session times are sorted by time length (duration). wlsxUserStatsGroup This table lists the user count information based on the authentication type. wlsxTotalNumOfUsers Syntax Counter32 Max-Access read-only Status current Description This table lists the total number of users.
Table 96 wlsxUserTable OIDs (Continued) Object Object ID nUserBWContractName 1.3.6.1.4.1.14823.2.4.1.2.1.18 wlsxUserEntry 18 nUserBWContractUsage 1.3.6.1.4.1.14823.2.4.1.2.1.19 wlsxUserEntry 19 nUserBWContractId 1.3.6.1.4.1.14823.2.4.1.2.1.20 wlsxUserEntry 20 nUserIsProxyArpEnabled 1.3.6.1.4.1.14823.2.4.1.2.1.21 wlsxUserEntry 21 nUserCurrentVLAN 1.3.6.1.4.1.14823.2.4.1.2.1.22 wlsxUserEntry 22 nUserIsWired 1.3.6.1.4.1.14823.2.4.1.2.1.23 wlsxUserEntry 23 nUserConnectedSlot 1.3.6.1.4.1.
wlsxUserEntry Syntax wlsxUserEntry Max-Access not-accessible Status current Description User entry Index { nUserPhyAddress, nUserIpAddress } History Added in ArubaOS 2.3. nUserPhyAddress Syntax MacAddress Max-Access not-accessible Status current Description Physical address of the station from which the user connected to the controller. History Added in ArubaOS 2.3.
nUserName Syntax DisplayString(SIZE(0..128)) Max-Access read-only Status current Description Name of the user. History Added in ArubaOS 2.3. nUserRole Syntax DisplayString(SIZE(0..64)) Max-Access read-only Status current Description The role configured for this user. History Added in ArubaOS 2.3. nUserUpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the user connected to the controller. History Added in ArubaOS 2.3.
| User Status current Description Sub-authentication method History Added in ArubaOS 2.3. Dell PowerConnect W-Series ArubaOS 6.
nUserAuthServerName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Name of the authentication server used to authenticate the user. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description nUserExtVPNAddress Syntax IpAddress Max-Access read-only Status current Description External VPN IP address if this is a VPN user, or 0.0.0.0 if not. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description.
| User Status current Description The object will indicate if the controller is the home controller for the user or not. History Added in ArubaOS 2.3. Dell PowerConnect W-Series ArubaOS 6.
nUserHomeAgentIpAddress Syntax IpAddress Max-Access read-only Status current Description The home agent IP address of the user. If this user is already on the home controller, then this IP is the controller IP address. Otherwise, it is the home controller IP address History Added in ArubaOS 2.3. nUserMobilityStatus Syntax Integer visitor(1) away(2) associated(3) wired(4) Max-Access read-only Status current Description The mobility status of the user. History Added in ArubaOS 2.3.
nUserAssignedVLAN Syntax Integer32 Max-Access read-only Status current Description This VLAN will be different from the default VLAN if the user has a derived VLAN configuration. History Added in ArubaOS 2.3. nUserBWContractName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status deprecated Description Name of the bandwidth contract applied to this user. History Added in ArubaOS 2.3. Deprecated in ArubaOS 3.2.0.0.
nUserIsProxyArpEnabled Syntax TruthValue Max-Access read-only Status current Description Indicates if the controller is proxy ARPing for the user. nUserCurrentVLAN Syntax Integer32 Max-Access read-only Status current Description The VLAN to which the user is currently bound. nUserIsWired Syntax TruthValue Max-Access read-only Status current Description Indicates whether this is a wired or wireless user. History Added in ArubaOS 2.3.
History 436 | User Added in ArubaOS 2.3. Dell PowerConnect W-Series ArubaOS 6.
nUserPhyType Syntax ArubaPhyType Max-Access read-only Status current Description The wireless PHY type to which the user is associated or wired. History Added in ArubaOS 3.1 nUserMobilityDomainName Syntax DisplayString(SIZE(0..64)) Max-Access read-only Status current Description The name of the mobility domain to which the mobile user belongs. History Added in ArubaOS 3.1 nUserUPBWContractName Syntax DisplayString(SIZE(0..
| User Max-Access read-only Status current Description Upstream bandwidth contract ID assigned to the user. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
nUserDNBWContractName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Name of the downstream bandwidth contract applied to this user. History Added in ArubaOS 3.2.0.0. nUserDNBWContractUsage Syntax Integer user(1) shared(2) Max-Access read-only Status current Description Indicates how the downstream bandwidth contract is used. History Added in ArubaOS 3.2.0.0.
| User Max-Access read-only Status current Description The User mode. History Added in ArubaOS 5.0 Dell PowerConnect W-Series ArubaOS 6.
nUserEncryptionMethod Syntax ArubaEncryptionMethod Max-Access read-only Status current Description Provides encryption method information through SNMP. History Added in ArubaOS 3.4 wlsxUserSessionTimeTable The objects of the wlsx User Session Time table list the user session time counts on an ESSID. The sessions are sorted by time length. The sessions that last longer than 240 minutes are sorted in the 240 minute bucket.
wlsxUserSessionTimeCount Syntax Counter32 Max-Access read-only Status current Description Number of users that are connected to the ESSID whose sessions expired in this time interval. History Added in ArubaOS 3.1.0.0. wlsxUserStatsGroup The objects of the wlsx User Stats Group table provide user statistics information based on authentication types. Table 98 wlsxUserStatsGroup OIDs Object Object ID wlsxNumOfUsers8021x 1.3.6.1.4.1.14823.2.2.1.4.1.4.1 wlsxUserStatsGroup 1 wlsxNumOfUsersVPN 1.
wlsxNumOfUsersCP Syntax Unsigned32 Max-Access read-only Status current Description The number of Captive Portal users. History Added in ArubaOS 3.4 wlsxNumOfUsersMAC Syntax Unsigned32 Max-Access read-only Status current Description The number of MAC users. History Added in ArubaOS 3.4 wlsxNumOfUsersStateful8021x Syntax Unsigned32 Max-Access read-only Status current Description The number of stateful 802.1x users. History Added in ArubaOS 3.
| User Dell PowerConnect W-Series ArubaOS 6.
Chapter 17 User6 The User6 module supports IPv6 users. This module provides information about the users, the party connected to the controller. Information includes the total number of users, name and access-level of the user, the physical location of the user’s station, and so on. For IPv4 support, see Chapter 16 on page 425. Figure 17 shows the architecture of the User6 MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The User MIBs are listed in the file aruba-user6.my.
Table 99 User6 MIB Tables (Continued) Table Description wlsxUser6SessionTimeTable This table lists the user session time counts on an ESSID. The session times are sorted by time length (duration). wlsxUser6AllInfoGroup The wlsx User6 All Information Group contains information about the users in the controller. wlsxTotalNumOfUsers6 Syntax Counter32 Max-Access read-only Status current Description Total Number of the users. History Added in ArubaOS 3.3.0.0.
Table 100 wlsxUser6AllInfoGroup Objects Object Object ID nUser6HomeVLAN 1.3.6.1.4.1.14823.2.2.1.14.1.2.15 wlsxUser6Entry 15 nUser6DefaultVLAN 1.3.6.1.4.1.14823.2.2.1.14.1.2.16 wlsxUser6Entry 16 nUser6AssignedVLAN 1.3.6.1.4.1.14823.2.2.1.14.1.2.17 wlsxUser6Entry 17 nUser6BWContractName 1.3.6.1.4.1.14823.2.2.1.14.1.2.18 wlsxUser6Entry 18 nUser6BWContractUsage 1.3.6.1.4.1.14823.2.2.1.14.1.2.19 wlsxUser6Entry 19 nUser6BWContractId 1.3.6.1.4.1.14823.2.2.1.14.1.2.
wlsxUser6Entry Syntax wlsxUser6Entry Max-Access not-accessible Status current Description User Entry Index { nUser6PhyAddress, nUser6IpAddress } nUser6PhyAddress Syntax MacAddress Max-Access not-accessible Status current Description MAC address of the station from which the user connected to the controller. History Added in ArubaOS 3.3.0.0. nUser6IpAddress Syntax DisplayString(SIZE(0..128)) Max-Access not-accessible Status current Description IPv6 Address of the user.
Status current Description The Role configured for this user. History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
nUser6UpTime Syntax TimeTicks Max-Access read-only Status current Description Time since the user connected to the controller. History Added in ArubaOS 3.3.0.0. nUser6AuthenticationMethod Syntax ArubaAuthenticationMethods Max-Access read-only Status current Description Authentication mechanism used by the user to connect to the controller. History Added in ArubaOS 3.3.0.0.
Status current Description External VPN IP Address, if this is a VPN user or 0.0.0.0 if not. History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
nUser6ApLocation Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Location of the access point to which the user is associated. History Added in ArubaOS 3.3.0.0. nUser6ApBSSID Syntax MacAddress Max-Access read-only Status current Description BSSID of the access point that the user used to connect to the controller. History Added in ArubaOS 3.3.0.0.
nUser6MobilityStatus Syntax Integer visitor(1) away(2) associated(3) wired(4) } Max-Access read-only Status current Description The Mobility Status of the User. History Added in ArubaOS 3.3.0.0. nUser6HomeVLAN Syntax Integer32 Max-Access read-only Status current Description Home VLAN of the User. If the user is on the home controller then this VLAN will be same as userDefaultVLAN. History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
nUser6DefaultVLAN Syntax Integer32 Max-Access read-only Status current Description Default VLAN of the User based on the AP configuration. History Added in ArubaOS 3.3.0.0. nUser6AssignedVLAN Syntax Integer32 Max-Access read-only Status current Description This VLAN will be different from the Default VLAN if the user has a derived VLAN Configuration. History Added in ArubaOS 3.3.0.0. nUser6BWContractName Syntax DisplayString(SIZE(0..
Max-Access read-only Status deprecated Description Bandwidth Contract Id Assigned to the User History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
nUser6IsProxyArpEnabled Syntax TruthValue Max-Access read-only Status current Description This object will indicate if the controller is proxy ARPing for the user. History Added in ArubaOS 3.3.0.0. nUser6CurrentVLAN Syntax Integer32 Max-Access read-only Status current Description The VLAN to which the user is currently bound. History Added in ArubaOS 3.3.0.0.
Status current Description The port to which the user is connected, if wired. History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
nUser6PhyType Syntax ArubaPhyType Max-Access read-only Status current Description The wireless PHY type to which the user is associated, or 'wired'. History Added in ArubaOS 3.3.0.0. nUser6MobilityDomainName Syntax DisplayString(SIZE(0..64)) Max-Access read-only Status current Description The name of mobility domain to which the mobile user belongs. History Added in ArubaOS 3.3.0.0. nUser6UPBWContractName Syntax DisplayString(SIZE(0..
Status current Description Upstream Bandwidth Contract Id Assigned to the User History Added in ArubaOS 3.3.0.0. Dell PowerConnect W-Series ArubaOS 6.
nUser6DNBWContractName Syntax DisplayString(SIZE(0..32)) Max-Access read-only Status current Description Name of the Downstream Bandwidth Contract applied to this user. History Added in ArubaOS 3.3.0.0. nUser6DNBWContractUsage Syntax Integer user(1) shared(2) Max-Access read-only Status current Description Indicates how the Downstream Bandwidth Contract is used. History Added in ArubaOS 3.3.0.0.
240min bucket. Table 101 wlsxUser6SessionTimeTable OIDs Object ID Object wlsxUser6SessionTimeEntry 1.3.6.1.4.1.14823.2.2.1.14.1.3 wlsxUser6SessionTimeTable 1 wlsxUser6SessionTimeLength 1.3.6.1.4.1.14823.2.2.1.14.1.3.1 wlsxUser6SessionTimeEntry 1 wlsxUser6SessionTime 1.3.6.1.4.1.14823.2.2.1.14.1.3.
| User6 Dell PowerConnect W-Series ArubaOS 6.
Chapter 18 Voice The Voice module provides information about Voice call status and call detail reporting. Figure 19 shows the architecture of the User MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The Voice MIBs are listed in the file aruba-voice.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Dell PowerConnect W-Series ArubaOS 6.
Figure 19 Voice Hierarchy 1.3.6.1.4.1.14823 Aruba Aruba E nterprise MIB Modules 1.3.6.1.4.1.14823.2 Aruba AP 1.3.6.1.4.1.14823.2.3 1.3.6.1.4.1.14823.2.2.1 wlsr E nterprise MIB Modules wlsx Voice MIB Modules 1.3.6.1.4.1.14823.2.3.1.12 wlsx Voice S tats Group 1.3.6.1.4.1.14823.2.3.1.12.1 wlsx Voice C dr Info Group 1.3.6.1.4.1.14823.2.3.1.12.1.1 wlsx Voice C all C trs Group 1.3.6.1.4.1.14823.2.3.1.12.1.2 1.3.6.1.4.1.14823.2.3.1.12.1.2.
wlsxVoiceCdrTotal The integer object of wlsx Voice CDR total lists the total number of Call Detail Records of the controller. Syntax Unsigned32 Max-Access read-only Status current Description Total number of CDR information in the controller. History Added in ArubaOS 3.2.0.0. wlsxVoiceCdrTable The objects of the wlsx Voice CDR table list information of the Call Detail Records of the controller. Table 103 wlxs Voice CDR Table OIDs Object Object ID wlsxVoiceCdrEntry 1.3.6.1.4.1.14823.2.2.1.12.1.
wlsxVoiceCdrEntry Syntax VoiceCdrEntry Max-Access not-accessible Status current Description Entry point. Index {voiceCdrId} History Added in ArubaOS 3.2.0.0. voiceCdrId Syntax Unsigned32 Max-Access not-accessible Status current Description Voice CDR ID/ History Added in ArubaOS 3.2.0.0. voiceCdrIp Syntax IpAddress Max-Access read-only Status current Description Voice CDR IP. History Added in ArubaOS 3.2.0.0.
Max-Access read-only Status current Description Voice CDR name. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
voiceCdrDialNum Syntax DisplayString Max-Access read-only Status current Description Voice CDR dialed number. History Added in ArubaOS 3.2.0.0. voiceCdrDir Syntax ArubaVoiceCdrDirection Max-Access read-only Status current Description Voice CDR direction incoming or outgoing. History Added in ArubaOS 3.2.0.0. voiceCdrOrigTime Syntax Unsigned32 Max-Access read-only Status current Description Voice CDR original time. History Added in ArubaOS 3.2.0.0.
Status current Description Voice CDR tear-down number. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
voiceCdrStatus Syntax ArubaCallStates Max-Access read-only Status current Description Voice CDR status. History Added in ArubaOS 3.2.0.0. voiceCdrReason Syntax DisplayString Max-Access read-only Status current Description Voice CDR reason. History Added in ArubaOS 3.2.0.0. voiceCdrDuration Syntax Integer32 Max-Access read-only Status current Description Voice CDR duration. History Added in ArubaOS 3.2.0.0.
Status current Description Voice CDR AP switch delay. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
voiceCdrCodec Syntax Integer32 Max-Access read-only Status current Description Voice CDR codec. History Added in ArubaOS 3.2.0.0. voiceCdrApName Syntax DisplayString Max-Access read-only Status current Description Voice CDR AP name. History Added in ArubaOS 3.2.0.0. voiceCdrApMac Syntax MacAddress Max-Access read-only Status current Description Voice CDR AP MAC address. History Added in ArubaOS 3.2.0.0.
Status current Description Voice CDR ESSID. History Added in ArubaOS 3.2.0.0. voiceCdrHandovers Syntax Integer32 Max-Access read-only Status current Description Voice CDR client hand overs, AKA mobility rate. History Added in ArubaOS 3.2.0.0. voiceCdrMOS Syntax Integer32 Max-Access read-only Status current Description Voice CDR MOS. History Added in ArubaOS 3.2.0.0.
Table 104 Voice Call Center OIDs (Continued) 474 | Voice Object Object ID voiceCallCtrsReqTerm 1.3.6.1.4.1.14823.2.2.1.12.1.2.12 wlsxVoiceCallCtrsGroup 12 voiceCallCtrsDecline 1.3.6.1.4.1.14823.2.2.1.12.1.2.13 wlsxVoiceCallCtrsGroup 13 voiceCallCtrsUnauth 1.3.6.1.4.1.14823.2.2.1.12.1.2.14 wlsxVoiceCallCtrsGroup 14 voiceCallCtrsMisc 1.3.6.1.4.1.14823.2.2.1.12.1.2.15 wlsxVoiceCallCtrsGroup 15 Dell PowerConnect W-Series ArubaOS 6.
voiceCallCtrsTotal Syntax Unsigned32 Max-Access read-only Status current Description Total number of calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsSuccess Syntax Unsigned32 Max-Access read-only Status current Description Total number of successful calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsFailed Syntax Unsigned32 Max-Access read-only Status current Description Total number of failed calls. History Added in ArubaOS 3.2.0.0.
| Voice Status current Description Total number of aborted calls. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
voiceCallCtrsOrig Syntax Unsigned32 Max-Access read-only Status current Description Total number of originated calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsRecvd Syntax Unsigned32 Max-Access read-only Status current Description Total number of received calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsActive Syntax Unsigned32 Max-Access read-only Status current Description Total number of active calls. History Added in ArubaOS 3.2.0.0.
| Voice Status current Description Total number of busy calls. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
voiceCallCtrsSvc Syntax Unsigned32 Max-Access read-only Status current Description Total number of service unavailable calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsReqTerm Syntax Unsigned32 Max-Access read-only Status current Description Total number of request terminated calls. History Added in ArubaOS 3.2.0.0. voiceCallCtrsDecline Syntax Unsigned32 Max-Access read-only Status current Description Total number of declined calls. History Added in ArubaOS 3.2.0.0.
Status current Description Total number of miscellaneous calls. History Added in ArubaOS 3.2.0.0. wlsxVoiceClientTotal The wlsx Voice Client Total group provides the total number of active client session of the controller. Syntax Unsigned32 Max-Access read-only Status current Description Total number of active client sessions in the controller. History Added in ArubaOS 3.2.0.0. wlsxVoiceClientTable The objects of the wlsx Voice Client table list voice client information.
wlsxVoiceClientEntry Syntax VoiceClientEntry Max-Access not-accessible Description Entry point. Index { wlanStaPhyAddress } History Added in ArubaOS 3.2.0.0. voiceClientIp Syntax IpAddress Max-Access read-only Status current Description Voice client IP address. History Added in ArubaOS 3.2.0.0. voiceClientProtocol Syntax ArubaVoipProtocol Max-Access read-only Status current Description Voice client protocol used. History Added in ArubaOS 3.2.0.0.
| Voice Status current Description Voice client contact name. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
voiceClientServerName Syntax DisplayString Max-Access read-only Status current Description Voice client server name. History Added in ArubaOS 3.2.0.0. voiceClientEssid Syntax DisplayString Max-Access read-only Status current Description Voice client ESSID. History Added in ArubaOS 3.2.0.0. voiceClientVlanId Syntax ArubaVlanValidRange Max-Access read-only Status current Description Voice client VLAN ID. History Added in ArubaOS 3.2.0.0.
Status current Description Total number of active VoIP information in the controller. History Added in ArubaOS 3.2.0.0. wlsxVoiceAPBssidTable The objects of the wlsx Voice Access Point BSSID table provide active VoIP information. Table 106 wlsxVoiceAPBssidTable OIDs 484 | Voice Object Object ID wlsxVoiceAPBssidEntry 1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1 wlsxVoiceAPBssidTable 1 voiceAPBssidName 1.3.6.1.4.1.14823.2.2.1.12.1.4.2.1.1 wlsxVoiceAPBssidEntry 1 voiceAPBssidGroup 1.3.6.1.4.1.14823.2.
wlsxVoiceAPBssidEntry Syntax VoiceAPBssidEntry max-Access not-accessible Status current Description Entry to AP. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 3.2.0.0. voiceAPBssidName Syntax DisplayString Max-Access read-only Status current Description Voice access point name. History Added in ArubaOS 3.2.0.0. voiceAPBssidGroup Syntax DisplayString Max-Access read-only Status current Description Voice access point group.
Max-Access read-only Status current Description Voice access point total calls. History Added in ArubaOS 3.2.0.0. voiceAPBssidVoiceType Syntax DisplayString Max-Access read-only Status current Description Voice access point type. History Added in ArubaOS 3.2.0.0.
voiceAPBssidUpTime Syntax TimeTicks Max-Access read-only Status current Description Voice access point up time History Added in ArubaOS 3.2.0.0. voiceAPBssid100Sent Syntax Counter32 Max-Access read-only Status current Description Voice 100 sent. History Added in ArubaOS 3.2.0.0. voiceAPBssid503Sent Syntax Counter32 Max-Access read-only Status current Description Voice 503 sent. History Added in ArubaOS 3.2.0.0.
| Voice Status current Description Voice access point kicked off. History Added in ArubaOS 3.2.0.0. Dell PowerConnect W-Series ArubaOS 6.
voiceAPBssidTspecDenied Syntax Counter32 Max-Access read-only Status current Description Voice access point Tspec denied. History Added in ArubaOS 3.2.0.0. voiceAPBssidCacFlag Syntax ArubaVoiceCacBit Max-Access read-only Status current Description Voice access point CAC flag. History Added in ArubaOS 3.2.0.0. voiceAPBssidTotVoiceClients Syntax Unsigned32 Max-Access read-only Status current Description Voice access point total number of voice clients. History Added in ArubaOS 3.
Status current Description Voice access point total SIP calls. History Added in ArubaOS 3.2.0.0. voiceAPBssidCallsSVP Syntax Unsigned32 Max-Access read-only Status current Description Voice access point total SVP calls. History Added in ArubaOS 3.2.0.0. voiceAPBssidCallsVocera Syntax Unsigned32 Max-Access read-only Status current Description Voice access point total Vocera calls. History Added in ArubaOS 3.2.0.0.
Chapter 19 WLAN The wireless local area network (WLAN) module provides information about the Wireless Management System (WMS) in the Dell controller. Figure 20 shows the architecture of the WLAN MIB relative to 1.3.6.1.4.1.14823 (iso.org.dod.internet.private.enterprise.aruba). The WLAN MIBs are listed in the file aruba-wlan.my. For information about downloading Dell MIB files, see “Downloading MIB Files” on page 23. Dell PowerConnect W-Series ArubaOS 6.
Figure 20 WLAN Hierarchy Aruba 1.3.6.1.4.1.14823 Aruba Enterprise MIB Modules Switch 1.3.6.1.4.1.14823.2 1.3.6.1.4.1.14823.2.2 wlsx Enterprise MIB Modules wlsx Switch 1.3.6.1.4.1.14823.2.2.1 1.3.6.1.4.1.14823.2.2.1.5 wlsx Wlan Config Group 1.3.6.1.4.1.14823.2.2.1.5.1 wlsx Wlan State Group 1.3.6.1.4.1.14823.2.2.1.5.2 wlsx Wlan Access Point Info Group 1.3.6.1.4.1.14823.2.2.1.5.3.1 wlsx Wlan Access Point Info Group 1.3.6.1.4.1.14823.2.2.1.5.2.1.1 1.3.6.1.4.1.14823.2.2.1.5.2.1.
The WLAN MIB contains the following tables. Table 107 WLAN MIB Tables Table Description wlsxWlanAPGroupTable This table lists all the access points groups configured in the Dell controller. wlsxWlanAPTable This table lists all the access points connected to the controller. wlsxWlanRadioTable This table lists all the radios known to the controller. wlsxWlanAPBssidTable This table lists all the BSSIDs active on this controller.
wlsxWlanAccessPointInfoGroup The wlsxWlanAccessPointInfoGroup contains the following tables: z wlsxWlanTotalNumAccessPoints (local), which lists all the APs connected to the controller z wlsxWlanTotalNumStationsAssociated (global), which lists all the APs in the Dell Domain. This table is valid only on the master controllers. The group also contains two scalar objects, which indicate the total number of APs and the total number of clients connected.
wlsxWlanAPGroupEntry Syntax WlanAPGroupEntry Max-Access not-accessible Status current Description Index {wlanAPGroup} History Added in ArubaOS 2.3. wlanAPGroup Syntax DisplayString Max-Access not-accessible Status current Description The name of an AP group. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPNumAps Syntax Integer32 Max-Access read-only Status current Description The number of APs in the AP group. History Added in ArubaOS 2.3.
Table 110 wlsxWlanAPTable OIDs (Continued) Object Object ID wlanAPModel 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.5 wlsxWlanAPEntry 5 wlanAPSerialNumber 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.6 wlsxWlanAPEntry 6 wlanAPdot11aAntennaGain 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.7 wlsxWlanAPEntry 7 wlanAPdot11gAntennaGain 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.8 wlsxWlanAPEntry 8 wlanAPNumRadios 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.9 wlsxWlanAPEntry 9 wlanAPEnet1Mode 1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.
Description Access point entry. Index {wlanAPMacAddress} wlanAPMacAddress Syntax MacAddress Max-Access not-accessible Status current Description Ethernet MAC address of the access point. History Added in ArubaOS 2.3. wlanAPIpAddress Syntax IpAddress Max-Access read-only Status current Description IP address of the access point. History Added in ArubaOS 2.3. wlanAPName Syntax DisplayString Max-Access read-only Status current Description Host name of the access point.
wlanAPModel Syntax Object Identifier MAX-ACCES read-only Status current Description Sys OID of the access point. History Added in ArubaOS 2.3. wlanAPSerialNumber Syntax DisplayString(Size(0..32)) Max-Access read-only Status current Description Serial number of the access point. History Added in ArubaOS 2.3. wlanAPdot11aAntennaGain Syntax Integer32 Max-Access read-only Status current Description Configured antenna gain for ‘A’ radio. History Added in ArubaOS 2.3.
Status current Description Number of radios in the access point. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. wlanAPEnet1Mode Syntax ArubaEnet1Mode Max-Access read-only Status current Description ENET1 mode of the access point. History Added in ArubaOS 2.3. wlanAPIpsecMode Syntax ArubaEnableValue Max-Access read-only Status current Description IPsec mode of the access point. History Added in ArubaOS 2.3.
History Added in ArubaOS 2.3. wlanAPLocation Syntax DisplayString Max-Access read-only Status current Description Location of the access point History Added in ArubaOS 2.3. wlanAPBuilding Syntax Integer32 Max-Access read-only Status current Description AP building number. History Added in ArubaOS 2.3. wlanAPFloor Syntax Integer32 Max-Access read-only Status current Description AP floor number. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description AP antenna status. History Added in ArubaOS 2.3. wlanAPStatus Syntax ArubaAPStatus Max-Access read-only Status current Description AP status. History Added in ArubaOS 2.3. wlanAPNumBootstraps Syntax Integer32 Max-Access read-only Status current Description Number of times the AP has boot strapped with the controller. History Added in ArubaOS 2.3.
History Added in ArubaOS 2.3. wlanAPMonitorMode Syntax ArubaMonitorMode Max-Access read-only Status current Description Indicates whether any radio on this AP is acting as an air monitor. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. wlanAPFQLNBuilding Syntax DisplayString Max-Access read-only Status current Description The building component of the AP’s FQLN. History Added in ArubaOS 3.1.0.0.
wlanAPFQLNCampus Syntax DisplayString Max-Access read-only Status current Description The campus component of the AP’s FQLN. History Added in ArubaOS 3.1 wlanAPLongitude Syntax DisplayString Max-Access read-only Status current Description Longitude of the AP. signed floating-point value. History Added in ArubaOS 3.2.0.0. wlanAPLatitude Syntax DisplayString Max-Access read-only Status current Description Latitude of the AP. signed floating-point value. History Added in ArubaOS 3.
Status current Description AP mesh role. History Added in ArubaOS 3.2.0.0. wlanAPSysLocation Syntax Display String Max-Access read-only Status current Description Allows the sysLocation value to be obtained by making SNMP queries to the controller. History Added in ArubaOS 6.0. wlsxWlanRadioTable The objects of the wlsx WLAN Radio table provide information on the access points connected in radios that are known to the Dell controller.
wlsxWlanRadioEntry Syntax WlanRadioEntry Max-Access not-accessible Status current Description Index {wlanAPMacAddress, wlanAPRadioNumber} History Added in ArubaOS 2.3. wlanAPRadioNumber Syntax Integer32 Max-Access not-accessible Status current Description The number of the radio History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. wlanAPRadioType Syntax ArubaPhyType Max-Access read-write Status current Description Type of the radio History Added in ArubaOS 2.3.
Max-Access read-only Status current Description The current power level of the access point radio. History Added in ArubaOS 2.3. Updated in ArubaOS OS 3.2—description. wlanAPRadioMode Syntax ArubaAccessPointMode Max-Access read-only Status current Description The mode in which the access point radio is operating. History Added in ArubaOS 2.3. Updated in ArubaOS OS 3.2—description.
Description The number of clients this radio is monitoring. History Added in ArubaOS 2.3. wlanAPRadioNumActiveBSSIDs Syntax Integer32 Max-Access read-only Status current Description The number of AP BSSIDs this radio is monitoring. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. wlanAPRadioNumMonitoredBSSIDs Syntax Integer32 Max-Access read-only Status current Description The number of AP BSSIDs we are monitoring on this radio. History Added in ArubaOS 2.3.
Description Tilt angle of antenna in degrees. -ve for downtilt, +ve for uptilt. Signed floating-point value. Range: -90 to +90. History Added in ArubaOS 3.2.0.0. wlanAPRadioHTMode Syntax ArubaHTMode Max-Access read-only Status current Description The HT mode of the radio, if any. History Added in ArubaOS 3.3.0.0. wlanAPRadioHTExtChannel Syntax ArubaHTExtChannel Max-Access read-only Status current Description Indicates the offset of the 40MHz extension channel, if any.
History Added in ArubaOS 3.4.1 wlsxWlanAPBssidTable The objects of the wlsx WLAN Access Point BSSID table provide information about the BSSIDs that are active on the controller. Table 112 wlsxWlanAPBssidTable OIDs Object Object ID wlsxWlanAPBssidEntry 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1 wlsxWlanAPBssidTable 1 wlanAPBSSID 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.1 wlsxWlanAPBssidEntry 1 wlanAPESSID 1.3.6.1.4.1.14823.2.2.1.5.2.1.7.1.2 wlsxWlanAPBssidEntry 2 wlanAPBssidSlot 1.3.6.1.4.1.14823.2.2.1.5.2.1.
Status current Description The MAC address of the access point. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. wlanAPESSID Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description ESSID that this BSSID is advertising. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.—description. wlanAPBssidSlot Syntax Unsigned32 Max-Access read-only Status current Description Slot to which the access point is connected.
History Added in ArubaOS 2.3. wlanAPBssidRogueType Syntax ArubaRogueApType Max-Access read-only Status current Description The type of the rogue. History Added in ArubaOS 2.3. wlanAPBssidMode Syntax Integer ap(1) am(2) mpp(3) mp(4) Max-Access read-only Status current Description Indicates whether the access point is an air monitor, a regular AP, a mesh portal, or a mesh point. History Added in ArubaOS 2.3. Updated in ArubaOS 3.2.0.0.
Description Time (in hundredths of seconds) since a tunnel is created between the access point and controller. History Added in ArubaOS 2.3. wlanAPBssidInactiveTime Syntax TimeTicks Max-Access read-only Status current Description Time (in hundredths of seconds) since any activity took place on the BSSID. History Added in ArubaOS 2.3. wlanAPBssidLoadBalancing Syntax TruthValue Max-Access read-only Status current Description Indicates whether load balancing is enabled or not.
wlanAPBssidPhyNumber Syntax Integer32 Max-Access read-only Status current Description Indicates the radio number to which this BSSID belongs. History Added in ArubaOS 2.3. wlanAPBssidHTMode Syntax ArubaHTMode Max-Access read-only Status current Description Indicates the HT mode of this BSSID, if any. History Added in ArubaOS 3.3.0.0.
The objects of the wlsx WLAN ESSID table provide information of the access points to the controller. Table 113 wlsxWlanESSIDTableOBJECT OIDs Object Object ID wlsxWlanESSIDEntry 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1 wlsxWlanESSIDTable 1 wlanESSID 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.1 wlsxWlanESSIDEntry 1 wlanESSIDNumStations 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.2 wlsxWlanESSIDEntry 2 wlanESSIDNumAccessPointsUp 1.3.6.1.4.1.14823.2.2.1.5.2.1.8.1.3 wlsxWlanESSIDEntry 3 wlanESSIDNumAccessPointsDown 1.3.6.
wlanESSIDNumAccessPointsUp Syntax Unsigned32 Max-Access read-only Status current Description The number of APs currently advertising this ESSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanESSIDNumAccessPointsDown Syntax Unsigned32 Max-Access read-only Status current Description The number of APs configured to advertise this ESSID that are not currently operational. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlsxWlanESSIDVLANPoolEntry Syntax WlanESSIDVLANPoolEntry Max-Access not-accessible Status current Description Station management entry. History Added in ArubaOS 2.3. wlanESSIDVLANId Syntax Unsigned32 Max-Access not-accessible Status current Description VLAN which is part of the VLAN pool for this ESSID. History Added in ArubaOS 2.3. wlanESSIDVLANPoolStatus Syntax Row Status Max-Access read-create Status current Description Row status object used to indicate the status of the row.
Table 115 wlsxWlanStationTable OIDs (Continued) Object Object ID wlanStaVLANId 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.7 wlsxWlanStationEntry 7 wlanStaVOIPState 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.8 wlsxWlanStationEntry 8 wlanStaVOIPProtocol 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.9 wlsxWlanStationEntry 9 wlanStaTransmitRate 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.10 wlsxWlanStationEntry 10 wlanStaAssociationID 1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.11 wlsxWlanStationEntry 11 wlanStaAccessPointESSID 1.3.6.1.4.1.
wlanStaPhyType Syntax ArubaPhyType Max-Access read-only Status current Description Type of the station. History Added in ArubaOS 2.3. wlanStaIsAuthenticated Syntax TruthValue Max-Access read-only Status current Description Indicates whether the station is authenticated. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanStaIsAssociated Syntax TruthValue Max-Access read-only Status current Description Indicates whether the station is associated.
Max-Access read-only Status current Description VLAN in which the station is present. History Added in ArubaOS 2.3. wlanStaVOIPState Syntax ArubaEnableValue Max-Access read-only Status current Description The state of VOIP for this station. History Added in ArubaOS 2.3. wlanStaVOIPProtocol Syntax ArubaVoipProtocolType Max-Access read-only Status current Description If VoIP is enabled, the type of the protocol supported. History Added in ArubaOS 2.3.
History Added in ArubaOS 2.3. wlanStaAccessPointESSID Syntax DisplayString(Size(0..64)) Max-Access read-only Status current Description ESSID of the access point. History Added in ArubaOS 2.3. wlanStaPhyNumber Syntax Integer32 Max-Access read-only Status current Description Radio PHY number to which the station is associated. History Added in ArubaOS 2.3. wlanStaRSSI Syntax Integer32 Max-Access read-only Status current Description Signal-to-noise ratio for the station.
Max-Access read-only Status current Description The HT status of the station. History Added in ArubaOS 3.3.0.0 wlsxWlanAPStatsTable The objects of the wlsx WLAN Access Point Statistics table provide information about access points. Table 116 wlsxWlanAPStatsTable OIDs Object Object ID wlsxWlanAPStatsEntry 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1 wlsxWlanAPStatsTable wlanAPCurrentChannel 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.1 wlsxWlanAPStatsEntry 1 wlanAPNumClients 1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.
wlsxWlanAPStatsEntry Syntax WlanAPStatsEntry Max-Access not-accessible Status current Description Access point stats entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 2.3. wlanAPCurrentChannel Syntax Unsigned32 Max-Access read-only Status current Description The channel the AP is currently using. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanAPTxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes transmitted on this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPRxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets received on this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
Max-Access read-only Status current Description The number of deauthentications received on this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPChannelThroughput Syntax Integer32 Max-Access read-only Status current Description The throughput achieved on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
Max-Access read-only Status current Description The number of broadcast and multicast packets as a percentage of the total packets transmitted on this BSSIDchannel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted by this BSSID. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
Status current Description The number of error packets as a percentage of the total packets received on the current channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received on this BSSID. History Added in ArubaOS 2.5.
Description The number of packets transmitted on this BSSID. History Added in ArubaOS 2.5. Deprecated in ArubaOS 3.2.0.0. wlanAPTxDataBytes Syntax Counter32 Max-Access read-only Status deprecated Description The number of bytes transmitted on this BSSID. History Added in ArubaOS 2.5. Deprecated in ArubaOS 3.2.0.0. wlanAPRxDataPkts64 Syntax Counter64 Max-Access read-only Status current Description The number of packets received on this BSSID. History Added in ArubaOS 3.2.0.0.
wlanAPTxDataBytes64 Syntax Counter64 Max-Access read-only Status current Description The number of bytes transmitted on this BSSID. History Added in ArubaOS 3.2.0.0. wlsxWlanAPRateStatsTable The objects of the wlsx WLAN Access Point Rate Statistics table provide information on the access point packet and byte counts, which are grouped by data rates. Table 117 wlsxWlanAPRateStatsTable OIDs 528 | WLAN Object Object ID wlsxWlanAPRateStatsEntry 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.
Table 117 wlsxWlanAPRateStatsTable OIDs (Continued) Object Object ID wlanAPStatsTotPktsAt9Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.23 wlsxWlanAPRateStatsEntry 23 wlanAPStatsTotBytesAt9Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.24 wlsxWlanAPRateStatsEntry 24 wlanAPStatsTotPktsAtHT6dot5Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.25 wlsxWlanAPRateStatsEntry 25 wlanAPStatsTotBytesAtHT6dot5Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.26 wlsxWlanAPRateStatsEntry 26 wlanAPStatsTotPktsAtHT13Mbps 1.3.6.1.4.1.14823.2.
Table 117 wlsxWlanAPRateStatsTable OIDs (Continued) 530 | WLAN Object Object ID wlanAPStatsTotPktsAtHT78Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.57 wlsxWlanAPRateStatsEntry 57 wlanAPStatsTotBytesAtHT78Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.58 wlsxWlanAPRateStatsEntry 58 wlanAPStatsTotPktsAtHT81Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.59 wlsxWlanAPRateStatsEntry 59 wlanAPStatsTotBytesAtHT81Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.60 wlsxWlanAPRateStatsEntry 60 wlanAPStatsTotPktsAtHT90Mbps 1.3.6.1.
Table 117 wlsxWlanAPRateStatsTable OIDs (Continued) Object Object ID wlanAPStatsTotPktsAtHT300Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.91 wlsxWlanAPRateStatsEntry 91 wlanAPStatsTotBytesAtHT300Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.92 wlsxWlanAPRateStatsEntry 92 wlsxWlanAPRateStatsEntry Syntax wlsxWlanAPRateStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 2.3.
History Added in ArubaOS 2.3. wlanAPStatsTotBytesAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 2 Mbps rate. History Added in ArubaOS 2.3. wlanAPStatsTotPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 5 Mbps rate. History Added in ArubaOS 2.3.
Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 11 Mbps rate. History Added in ArubaOS 2.3. wlanAPStatsTotPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 6 Mbps rate. History Added in ArubaOS 2.3.
History Added in ArubaOS 2.3. wlanAPStatsTotPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 18 Mbps rate. History Added in ArubaOS 2.3. wlanAPStatsTotBytesAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 18 Mbps rate. History Added in ArubaOS 2.3.
wlanAPStatsTotPktsAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 36 Mbps rate. History Added in ArubaOS 2.3. wlanAPStatsTotBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 36 Mbps rate. History Added in ArubaOS 2.3.
wlanAPStatsTotPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of packets observed on this BSSID at 54 Mbps rate. History Added in ArubaOS 2.3. wlanAPStatsTotBytesAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The total number of bytes observed on this BSSID at 54 Mbps rate. History Added in ArubaOS 2.3.
wlanAPStatsTotPktsAtHT6dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 6.5 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT6dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 6.5 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT13dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observedon this BSSID at the HT 13.5 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT13dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 13.5 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT19dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 19.5 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT19dot5Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 19.5 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT27Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 27.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT27Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 27.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT39Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 39.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT39Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 39.0 rate.
wlanAPStatsTotPktsAtHT45Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 45.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT45Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 45.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT54Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 54.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT54Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 54.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT60Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 60.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT60Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 60.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT78Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 78.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT78Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 78.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT90Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 90.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT90Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 90.0 rate. History Added in ArubaOS 3.3.0.0.
\wlanAPStatsTotPktsAtHT108Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 108.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT108Mbps Syntax Counter32 Max-Access read-only Status5 current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 108.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT120Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 120.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT120Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 120.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT130Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 130.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT130Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 130.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT150Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 150.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT150Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 150.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT180Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observedbon this BSSID at the HT 180.0 rate. wlanAPStatsTotBytesAtHT180Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 180.0 rate. History Added in ArubaOS 3.3.0.0.
wlanAPStatsTotPktsAtHT240Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 240.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT240Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observed on this BSSID at the HT 240.0 rate.
wlanAPStatsTotPktsAtHT270Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of packets observed on this BSSID at the HT 270.0 rate. History Added in ArubaOS 3.3.0.0. wlanAPStatsTotBytesAtHT270Mbps Syntax Counter32 Max-Access read-only Status current Description This attribute indicates the total number of bytes observedon this BSSID at the HT 270.0 rate. History Added in ArubaOS 3.3.0.0.
wlsxWlanAPDATypeStatsTable The objects of the wlsx WLAN Access Point Destination Address Type Statistics table provide BSSID statistics, which are grouped by destination address (DA). Table 118 wlsxWlanAPDATypeStatsTable OIDs Object Object ID wlsxWlanAPDATypeStatsEntry 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1 wlsxWlanAPDATypeStatsTable 1 wlanAPStatsTotDABroadcastPkts 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.1 wlsxWlanAPDATypeStatsEntry 1 wlanAPStatsTotDABroadcastBytes 1.3.6.1.4.1.14823.2.2.1.5.3.1.3.1.
wlanAPStatsTotDABroadcastBytes Syntax Counter32 Max-Access read-only Status current Description The total number of broadcast bytes observed on this BSSID. History Added in ArubaOS 2.3. wlanAPStatsTotDAMulticastPkts Syntax Counter32 Max-Access read-only Status current Description The total number of multicast packets observed on this BSSID. History Added in ArubaOS 2.3.
wlanAPStatsTotDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description The total number of unicast bytes observed on this BSSID. History Added in ArubaOS 2.3. wlsxWlanAPFrameTypeStatsTable The objects of the wlsx WLAN AP Frame Type Stats lists BSSID statistics, which are grouped by the packet type. Table 119 wlsxWlanAPFrameTypeStatsTable OIDs Object Object ID wlsxWlanAPFrameTypeStatsEntry 1.3.6.1.4.1.14823.2.2.1.5.3.1.4.
wlanAPStatsTotMgmtPkts Syntax Counter32 Max-Access read-only Status current Description The total number of management packets observed on this BSSID. History Added in ArubaOS 2.3. wlanAPStatsTotMgmtBytes Syntax Counter32 Max-Access read-only Status current Description The total number of management bytes observed on this BSSID. History Added in ArubaOS 2.3.
wlanAPStatsTotDataPkts Syntax Counter32 Max-Access read-only Status current Description The total number of data packets observed on this BSSID. History Added in ArubaOS 2.3. wlanAPStatsTotDataBytes Syntax Counter32 Max-Access read-only Status current Description The total number of data bytes observed on this BSSID. History Added in ArubaOS 2.3.
wlsxWlanAPPktSizeStatsEntry Syntax wlsxWlanAPPktSizeStatsEntry Max-Access not-accessible Status current Description User entry. Index {wlanAPMacAddress, wlanAPRadioNumber, wlanAPBSSID} History Added in ArubaOS 2.3. wlanAPStatsPkts63Bytes Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were less than 64 bytes long. History Added in ArubaOS 2.3.
wlanAPStatsPkts256To511 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were between 256 and 511 bytes long. History Added in ArubaOS 2.3. wlanAPStatsPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description The total number of packets that were between 512 and 1023 bytes long. History Added in ArubaOS 2.3.
Table 121 wlsxWlanAPChStatsTableOIDs (Continued) Object Object OID wlanAPChTotPhyErrPkts 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.7 wlsxWlanAPChStatsEntry 7 wlanAPChTotMacErrPkts 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.8 wlsxWlanAPChStatsEntry 8 wlanAPChNoise 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.9 wlsxWlanAPChStatsEntry 9 wlanAPChCoverageIndex 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.10 wlsxWlanAPChStatsEntry 10 wlanAPChInterferenceIndex 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.
wlsxWlanAPChStatsEntry Syntax WlanAPChStatsEntry Max-Access not-accessible Status current Description Access point channel stats entry. Index {wlanAPMacAddress, wlanAPRadioNumber} History Added in ArubaOS 2.3. wlanAPChannelNumber Syntax Integer(1..165) Max-Access read-only Status current Description The channel the AP is currently using. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanAPChTotBytes Syntax Counter32 Max-Access read-only Status current Description The total bytes observed on this channel. History Added in ArubaOS 2.3. wlanAPChTotRetryPkts Syntax Counter32 Max-Access read-only Status current Description The total retry packets observed on this channel. History Added in ArubaOS 2.3. wlanAPChTotFragmentedPkts Syntax Counter32 Max-Access read-only Status current Description The total fragmented packets observed on this channel.
wlanAPChTotMacErrPkts Syntax Counter32 Max-Access read-only Status current Description The total MAC errors packets observed on this channel. History Added in ArubaOS 2.3. wlanAPChNoise Syntax Integer32 Max-Access read-only Status current Description The noise observed on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanAPChFrameRetryRate Syntax Integer32 Max-Access read-only Status current Description The number of retry packets as a percentage of the total packets transmitted and received on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanAPChFrameBandwidthRate Syntax Integer32 Max-Access read-only Status current Description The bandwidth of this channel in Kbps. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description. wlanAPChFrameRetryErrorRate Syntax Integer32 Max-Access read-only Status deprecated Description The number of error packets as a percentage of the total packets received on this channel. History Added in ArubaOS 2.3. Updated in ArubaOS 3.1—description.
wlanAPChFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received on this channel. History Added in ArubaOS 3.
wlanAPChRetryCount Syntax Integer32 Max-Access read-only Status current Description This counter increases when an MSDU is successfully transmitted after one or more retransmissions. History Added in ArubaOS 6.0 wlanAPChMultipleRetryCount Syntax Integer32 Max-Access read-only Status current Description This counter increases when an MSDU is successfully transmitted after more than one retransmission. History Added in ArubaOS 6.
wlanAPChRTSFailureCount Syntax Integer32 Max-Access read-only Status current Description This counter increases when a CTS is not received in response to an RTS. History Added in ArubaOS 6.0 wlanAPChACKFailureCount Syntax Integer32 Max-Access read-only Status current Description This counter increases when an ACK is not received when expected. History Added in ArubaOS 6.
wlanAPChFCSErrorCount Syntax Integer32 Max-Access read-only Status current Description This counter increases when an FCS error is detected in a received MPDU. History Added in ArubaOS 6.0 wlanAPChTransmittedFrameCount Syntax Integer32 Max-Access read-only Status current Description This counter increases for each successfully transmitted MSDU. History Added in ArubaOS 6.
wlanAPChTxUtilization Syntax Integer (0..100) Max-Access read-only Status current Description This is the percentage of time spent by the radio in transmitting packets. History Added in ArubaOS 6.0 wlanAPChUtilization Syntax Integer (0..100) Max-Access read-only Status current Description This is the percentage of time the channel is busy. History Added in ArubaOS 6.
Table 122 wlsxWlanStationStatsTable OIDs (Continued) Object Object OID wlanStaRxDeauthentications 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.15 wlsxWlanStationStatsEntry 15 wlanStaFrameRetryRate 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.16 wlsxWlanStationStatsEntry 16 wlanStaFrameLowSpeedRate 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.17 wlsxWlanStationStatsEntry 17 wlanStaFrameNonUnicastRate 1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.18 wlsxWlanStationStatsEntry 18 wlanStaFrameFragmentationRate 1.3.6.1.4.1.14823.2.2.1.5.3.2.
wlanStaTxPkts Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaTxBytes Syntax Counter32 Max-Access read-only Status current Description The number of bytes transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
wlanStaTxBCastPkts Syntax Counter32 Max-Access read-only Status current Description The number of broadcast packets transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaRxBCastBytes Syntax Counter32 Max-Access read-only Status deprecated Description The number of broadcast bytes transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
wlanStaDataPkts Syntax Counter32 Max-Access read-only Status current Description The total number of data packets transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaCtrlPkts Syntax Counter32 Max-Access read-only Status current Description The total number of control packets transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
wlanStaTxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentication frames transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaRxDeauthentications Syntax Counter32 Max-Access read-only Status current Description The number of deauthentication frames received by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description.
wlanStaFrameNonUnicastRate Syntax Integer32 Max-Access read-only Status current Description The number of broadcast and multicast packets as a percentage of the total packets transmitted by this station. History Added in ArubaOS 2.3. Updated ArubaOS 3.1—description. wlanStaFrameFragmentationRate Syntax Integer32 Max-Access read-only Status current Description The number of fragments as a percentage of the total packets transmitted by this station. History Added in ArubaOS 2.3.
wlanStaFrameReceiveErrorRate Syntax Integer32 Max-Access read-only Status current Description The number of error packets as a percentage of the total packets received by this station. History Added in ArubaOS 3.2.0.0. wlanStaTxBCastBytes Syntax Counter32 Max-Access read-only Status current Description The number of broadcast bytes transmitted by this station. History Added in ArubaOS 3.2.0.0.
wlanStaRxBytes64 Syntax Counter64 Max-Access read-only Status current Description The number of bytes received by this station, 64-bit value. History Added in ArubaOS 6.0 wlsxWlanStaRateStatsTable The objects of wlsx WLAN Station Rate Stats table provide packet and byte count information for a station. The information is grouped by data rate. Table 123 wlsxWlanStaRateStatsTable OIDs Object Object OID wlsxWlanStaRateStatsEntry 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.
Table 123 wlsxWlanStaRateStatsTable OIDs (Continued) Object Object OID wlanStaRxPktsAt1Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.23 wlsxWlanStaRateStatsEntry 23 wlanStaRxBytesAt1Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.24 wlsxWlanStaRateStatsEntry 24 wlanStaRxPktsAt2Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.25 wlsxWlanStaRateStatsEntry 25 wlanStaRxBytesAt2Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.26 wlsxWlanStaRateStatsEntry 26 wlanStaRxPktsAt5Mbps 1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.
wlanStaTxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 1 Mbps rate. wlanStaTxBytesAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 1 Mbps rate. wlanStaTxPktsAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 2 Mbps rate.
wlanStaTxBytesAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 5 Mbps rate. wlanStaTxPktsAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 11 Mbps rate. wlanStaTxBytesAt11Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 11 Mbps rate.
wlanStaTxPktsAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 12 Mbps rate. wlanStaTxBytesAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 12 Mbps rate. wlanStaTxPktsAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 18 Mbps rate.
wlanStaTxBytesAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 24 Mbps rate. wlanStaTxPktsAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 36 Mbps rate. wlanStaTxBytesAt36Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 36 Mbps rate.
wlanStaTxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station at 54 Mbps rate. wlanStaTxBytesAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 54 Mbps rate. wlanStaRxPktsAt1Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 1 Mbps rate.
wlanStaRxBytesAt2Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 2 Mbps rate. wlanStaRxPktsAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 5 Mbps rate. wlanStaRxBytesAt5Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 5 Mbps rate.
wlanStaRxPktsAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 6 Mbps rate. wlanStaRxBytesAt6Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 6 Mbps rate. wlanStaRxPktsAt12Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 12 Mbps rate.
wlanStaRxBytesAt18Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 18 Mbps rate. wlanStaRxPktsAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 24 Mbps rate. wlanStaRxBytesAt24Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 24 Mbps rate.
wlanStaRxPktsAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 48 Mbps rate. wlanStaRxBytesAt48Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 48 Mbps rate. wlanStaRxPktsAt54Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 54 Mbps rate.
wlanStaTxBytesAt9Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets transmitted by the station at 9 Mbps rate. wlanStaRxPktsAt9Mbps Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station at 9 Mbps rate. wlanStaRxBytesAt9Mbps Syntax Counter32 Max-Access read-only Status current Description The number of octets received by the station at 9 Mbps rate.
wlsxWlanStaDATypeStatsEntry Max-Access not-accessible Status current Description User entry Index {wlanStaPhyAddress} wlanStaTxDABroadcastPkts Syntax Counter32 Max-Access read-only Status current Description The number of broadcast packets transmitted by this station. wlanStaTxDABroadcastBytes Syntax Counter32 Max-Access read-only Status current Description The number of broadcast bytes transmitted by this station.
wlanStaTxDAUnicastPkts Syntax Counter32 Max-Access read-only Status current Description The total of unicast packets transmitted by this station. wlanStaTxDAUnicastBytes Syntax Counter32 Max-Access read-only Status current Description The total of unicast bytes transmitted by this station. wlsxWlanStaFrameTypeStatsTable The objects of the wlsx WLAN Station Frame Type table provide information on the packet and byte counts per station. The information is sorted by frame type.
wlsxWlanStaFrameTypeStatsEntry Syntax wlsxWlanStaFrameTypeStatsEntry Max-Access not-accessible Status current Description User entry Index {wlanStaPhyAddress} wlanStaTxMgmtPkts Syntax Counter32 Max-Access read-only Status current Description The transmitted management packets from a station. wlanStaTxMgmtBytes Syntax Counter32 Max-Access read-only Status current Description The transmitted management bytes from a station.
wlanStaTxDataPkts Syntax Counter32 Max-Access read-only Status current Description The transmitted data packets from a station. wlanStaTxDataBytes Syntax Counter32 Max-Access read-only Status current Description The transmitted data bytes observed on this channel. wlanStaRxMgmtPkts Syntax Counter32 Max-Access read-only Status current Description The number of received management packets at a station.
wlanStaRxCtrlBytes Syntax Counter32 Max-Access read-only Status current Description The number of received control bytes at a station. wlanStaRxDataPkts Syntax Counter32 Max-Access read-only Status current Description The number of received data packets at a station. wlanStaRxDataBytes Syntax Counter32 Max-Access read-only Status current Description The number of received data bytes at a station.
Table 126 wlsxWlanStaPktSizeStatsTable OIDs (Continued) Object Object ID wlanStaRxPkts256To511 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.10 wlsxWlanStaPktSizeStatsEntry 10 wlanStaRxPkts512To1023 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.11 wlsxWlanStaPktSizeStatsEntry 11 wlanStaRxPkts1024To1518 1.3.6.1.4.1.14823.2.2.1.5.3.2.5.1.12 wlsxWlanStaPktSizeStatsEntry 12 wlsxWlanStaPktSizeStatsEntry Syntax wlsxWlanStaPktSizeStatsEntry Max-Access not-accessible Status current Description User entry.
wlanStaTxPkts256To511 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station that were between 256 and 511 bytes long. wlanStaTxPkts512To1023 Syntax Counter32 Max-Access read-only Status current Description The number of packets transmitted by the station that were between 512 and 1023 bytes long.
wlanStaRxPkts128To255 Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were between 128 and 255 bytes long. wlanStaRxPkts256To511 Syntax Counter32 Max-Access read-only Status current Description The number of packets received by the station that were between 256 and 511 bytes long.
Chapter 20 SNMP MIBs Reference This section provides lists of the SNMP MIB OIDs that are related to ArubaOS. The first table (Table 127) defines the sysObjectIds for Dell products. Table 127 SNMP OIDs returned as sysObjectID for Dell Networks products SNMP MIB OID Dell .1.3.6.1.4.1.674 PowerConnect products .1.3.6.1.4.1.674.10895 Dell PowerConnect W-650 Controller .1.3.6.1.4.1.674.10895.5001 Dell PowerConnect W-651 Controller .1.3.6.1.4.1.674.10895.5002 Dell PowerConnect W-3200 Controller .1.3.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxEnterpriseMibModules .1.3.6.1.4.1.14823.2.2.1 wlsxSwitchMIB .1.3.6.1.4.1.14823.2.2.1.1 wlsxSystemXGroup .1.3.6.1.4.1.14823.2.2.1.1.1 wlsxHostname .1.3.6.1.4.1.14823.2.2.1.1.1.1 wlsxModelName .1.3.6.1.4.1.14823.2.2.1.1.1.2 wlsxSwitchIp .1.3.6.1.4.1.14823.2.2.1.1.1.3 wlsxSwitchRole .1.3.6.1.4.1.14823.2.2.1.1.1.4 wlsxSwitchMasterIp .1.3.6.1.4.1.14823.2.2.1.1.1.5 wlsxSwitchListTable .1.3.6.1.4.1.14823.2.2.1.1.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSysXMemoryEntry .1.3.6.1.4.1.14823.2.2.1.1.1.11.1 sysXMemoryIndex .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.1 sysXMemorySize .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.2 sysXMemoryUsed .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.3 sysXMemoryFree .1.3.6.1.4.1.14823.2.2.1.1.1.11.1.4 wlsxSwitchLicenseSerialNumber .1.3.6.1.4.1.14823.2.2.1.1.1.12 wlsxUserInfoGroup .1.3.6.1.4.1.14823.2.2.1.1.2 wlsxSwitchUserTable .1.3.6.1.4.1.14823.2.2.1.1.2.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSwitchStationStatsEntry .1.3.6.1.4.1.14823.2.2.1.1.2.3.1 staTxPackets .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.1 staTxBytes .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.2 staRxPackets .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.3 staRxBytes .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.4 staBwRate .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.5 staFrameRetryRate .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.6 staFrameLowSpeedRate .1.3.6.1.4.1.14823.2.2.1.1.2.3.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID globalAPLocation .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.1 globalAPAddress .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.2 globalAPLocalSwitch .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.3 globalAPdot11aPhyAddr .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.4 globalAPdot11bPhyAddr .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.5 globalAPState .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.6 globalAPdot11gPhyAddr .1.3.6.1.4.1.14823.2.2.1.1.3.4.1.7 wlsxSwitchAccessPointStatsTable .1.3.6.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxTemperatureValue .1.3.6.1.4.1.14823.2.2.1.1.100.100.8 wlsxProcessName .1.3.6.1.4.1.14823.2.2.1.1.100.100.9 wlsxStationMacAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.10 wlsxStationBlackListReason .1.3.6.1.4.1.14823.2.2.1.1.100.100.11 wlsxSpoofedIpAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.12 wlsxSpoofedOldPhyAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.13 wlsxSpoofedNewPhyAddress .1.3.6.1.4.1.14823.2.2.1.1.100.100.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxFanFailure .1.3.6.1.4.1.14823.2.2.1.1.100.1015 wlsxOutOfRangeVoltage .1.3.6.1.4.1.14823.2.2.1.1.100.1016 wlsxOutOfRangeTemperature .1.3.6.1.4.1.14823.2.2.1.1.100.1017 wlsxLCInserted .1.3.6.1.4.1.14823.2.2.1.1.100.1018 wlsxSCInserted .1.3.6.1.4.1.14823.2.2.1.1.100.1019 wlsxGBICInserted .1.3.6.1.4.1.14823.2.2.1.1.100.1020 wlsxProcessDied .1.3.6.1.4.1.14823.2.2.1.1.100.1021 wlsxProcessExceedsMemoryLimits .1.3.6.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSysExtSwitchMasterIp .1.3.6.1.4.1.14823.2.2.1.2.1.5 wlsxSysExtSwitchDate .1.3.6.1.4.1.14823.2.2.1.2.1.6 wlsxSysExtSwitchBaseMacaddress .1.3.6.1.4.1.14823.2.2.1.2.1.7 wlsxSysExtFanTrayAssemblyNumber .1.3.6.1.4.1.14823.2.2.1.2.1.8 wlsxSysExtFanTraySerialNumber .1.3.6.1.4.1.14823.2.2.1.2.1.9 wlsxSysExtInternalTemparature .1.3.6.1.4.1.14823.2.2.1.2.1.10 wlsxSysExtLicenseSerialNumber .1.3.6.1.4.1.14823.2.2.1.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID sysExtCardAssemblyNo .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.7 sysExtCardManufacturingDate .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.8 sysExtCardHwRevision .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.9 sysExtCardFpgaRevision .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.10 sysExtCardSwitchChip .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.11 sysExtCardStatus .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.12 sysExtCardUserSlot .1.3.6.1.4.1.14823.2.2.1.2.1.16.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSysExtControllerConfigID .1.3.6.1.4.1.14823.2.2.1.2.1.23 wlsxSysExtIsMMSConfigUpdateEnabled .1.3.6.1.4.1.14823.2.2.1.2.1.24 wlsxSysExtSwitchLastReload .1.3.6.1.4.1.14823.2.2.1.2.1.25 wlsxSysExtLastStatsReset .1.3.6.1.4.1.14823.2.2.1.2.1.26 wlsxSystemExtTableGenNumberGroup .1.3.6.1.4.1.14823.2.2.1.2.2 wlsxSysExtUserTableGenNumber .1.3.6.1.4.1.14823.2.2.1.2.2.1 wlsxSysExtAPBssidTableGenNumber .1.3.6.1.4.1.14823.2.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID ifExtEgressACLName .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.15 ifExtSessionACLName .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.16 ifExtXsecVlan .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.17 ifExtIsMonitoring .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.18 ifExtIsMux .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.19 ifExtUserSlotNumber .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.20 ifExtUserPortNumber .1.3.6.1.4.1.14823.2.2.1.3.1.1.1.21 ifExtPortSpeed .1.3.6.1.4.1.14823.2.2.1.3.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID ifExtVlanInterfaceIpNatInside .1.3.6.1.4.1.14823.2.2.1.3.1.4.1.11 ifExtVlanInterfaceIpIgmpSnooping .1.3.6.1.4.1.14823.2.2.1.3.1.4.1.12 wlsxUserMIB .1.3.6.1.4.1.14823.2.2.1.4 wlsxUserAllInfoGroup .1.3.6.1.4.1.14823.2.2.1.4.1 wlsxTotalNumOfUsers .1.3.6.1.4.1.14823.2.2.1.4.1.1 wlsxUserTable .1.3.6.1.4.1.14823.2.2.1.4.1.2 wlsxUserEntry .1.3.6.1.4.1.14823.2.2.1.4.1.2.1 nUserPhyAddress .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID nUserUPBWContractName .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.28 nUserUPBWContractUsage .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.29 nUserUPBWContractId .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.30 nUserDNBWContractName .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.31 nUserDNBWContractUsage .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.32 nUserDNBWContractId .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.33 nUserHTMode .1.3.6.1.4.1.14823.2.2.1.4.1.2.1.34 nUserForwardMode .1.3.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPModel .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.5 wlanAPSerialNumber .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.6 wlanAPdot11aAntennaGain .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.7 wlanAPdot11gAntennaGain .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.8 wlanAPNumRadios .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.9 wlanAPEnet1Mode .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.10 wlanAPIpsecMode .1.3.6.1.4.1.14823.2.2.1.5.2.1.4.1.11 wlanAPUpTime .1.3.6.1.4.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPRadioNumMonitoredBSSIDs .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.10 wlanAPRadioBearing .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.11 wlanAPRadioTiltAngle .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.12 wlanAPRadioHTMode .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.13 wlanAPRadioHTExtChannel .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.14 wlanAPRadioHTChannel .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.15 wlanAPRadioAPName .1.3.6.1.4.1.14823.2.2.1.5.2.1.5.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxWlanESSIDVlanPoolEntry .1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1 wlanESSIDVlanId .1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.1 wlanESSIDVlanPoolStatus .1.3.6.1.4.1.14823.2.2.1.5.2.1.9.1.2 wlsxWlanStationInfoGroup .1.3.6.1.4.1.14823.2.2.1.5.2.2 wlsxWlanStationTable .1.3.6.1.4.1.14823.2.2.1.5.2.2.1 wlsxWlanStationEntry .1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1 wlanStaPhyAddress .1.3.6.1.4.1.14823.2.2.1.5.2.2.1.1.1 wlanStaApBssid .1.3.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxWlanAPStatsEntry .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1 wlanAPCurrentChannel .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.1 wlanAPNumClients .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.2 wlanAPTxPkts .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.3 wlanAPTxBytes .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.4 wlanAPRxPkts .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.5 wlanAPRxBytes .1.3.6.1.4.1.14823.2.2.1.5.3.1.1.1.6 wlanAPTxDeauthentications .1.3.6.1.4.1.14823.2.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPStatsTotPktsAt11Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.7 wlanAPStatsTotBytesAt11Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.8 wlanAPStatsTotPktsAt6Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.9 wlanAPStatsTotBytesAt6Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.10 wlanAPStatsTotPktsAt12Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.11 wlanAPStatsTotBytesAt12Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.12 wlanAPStatsTotPktsAt18Mbps .1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPStatsTotPktsAtHT39Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.41 wlanAPStatsTotBytesAtHT39Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.42 wlanAPStatsTotPktsAtHT40dot5Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.43 wlanAPStatsTotBytesAtHT40dot5Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.44 wlanAPStatsTotPktsAtHT45Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.45 wlanAPStatsTotBytesAtHT45Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPStatsTotPktsAtHT135Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.75 wlanAPStatsTotBytesAtHT135Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.76 wlanAPStatsTotPktsAtHT150Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.77 wlanAPStatsTotBytesAtHT150Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.78 wlanAPStatsTotPktsAtHT162Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.79 wlanAPStatsTotBytesAtHT162Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.1.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxWlanAPPktSizeStatsTable .1.3.6.1.4.1.14823.2.2.1.5.3.1.5 wlsxWlanAPPktSizeStatsEntry .1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1 wlanAPStatsPkts63Bytes .1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.1 wlanAPStatsPkts64To127 .1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.2 wlanAPStatsPkts128To255 .1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.3 wlanAPStatsPkts256To511 .1.3.6.1.4.1.14823.2.2.1.5.3.1.5.1.4 wlanAPStatsPkts512To1023 .1.3.6.1.4.1.14823.2.2.1.5.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanAPChMultipleRetryCount 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.25 wlanAPChFrameDuplicateCount 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.26 wlanAPChRTSSuccessCount 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.27 wlanAPChRTSFailureCount 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.28 wlanAPChACKFailureCount 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.29 wlanAPChReceivedFragmentCount 1.3.6.1.4.1.14823.2.2.1.5.3.1.6.1.30 wlanAPChMulticastReceivedFrameCount 1.3.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanStaFrameFragmentationRate .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.19 wlanStaFrameBandwidthRate .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.20 wlanStaFrameRetryErrorRate .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.21 wlanStaFrameReceiveErrorRate .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.22 wlanStaTxBCastBytes .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.23 wlanStaTxMCastBytes .1.3.6.1.4.1.14823.2.2.1.5.3.2.1.1.24 wlanStaTxBytes64 1.3.6.1.4.1.14823.2.2.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanStaRxPktsAt2Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.25 wlanStaRxBytesAt2Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.26 wlanStaRxPktsAt5Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.27 wlanStaRxBytesAt5Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.28 wlanStaRxPktsAt11Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.29 wlanStaRxBytesAt11Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.30 wlanStaRxPktsAt6Mbps .1.3.6.1.4.1.14823.2.2.1.5.3.2.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlanStaTxMgmtPkts .1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.1 wlanStaTxMgmtBytes .1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.2 wlanStaTxCtrlPkts .1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.3 wlanStaTxCtrlBytes .1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.4 wlanStaTxDataPkts .1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.5 wlanStaTxDataBytes .1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.6 wlanStaRxMgmtPkts .1.3.6.1.4.1.14823.2.2.1.5.3.2.4.1.7 wlanStaRxMgmtBytes .1.3.6.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monPhyType .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.4 monAPCurrentChannel .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.5 monAPNumClients .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.6 monAPTxPkts .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.7 monAPTxBytes .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.8 monAPRxPkts .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.9 monAPRxBytes .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.10 monAPTxDeauthentications .1.3.6.1.4.1.14823.2.2.1.6.6.1.1.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monAPStatsTotPktsAt18Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.13 monAPStatsTotBytesAt18Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.14 monAPStatsTotPktsAt24Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.15 monAPStatsTotBytesAt24Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.16 monAPStatsTotPktsAt36Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.17 monAPStatsTotBytesAt36Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.1.2.1.18 monAPStatsTotPktsAt48Mbps .1.3.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monAPStatsPkts512To1023 .1.3.6.1.4.1.14823.2.2.1.6.6.1.5.1.5 monAPStatsPkts1024To1518 .1.3.6.1.4.1.14823.2.2.1.6.6.1.5.1.6 wlsxMonAPHTRateStatsTable .1.3.6.1.4.1.14823.2.2.1.6.6.1.6 wlsxMonAPHTRateStatsEntry .1.3.6.1.4.1.14823.2.2.1.6.6.1.6.1 monHTRate .1.3.6.1.4.1.14823.2.2.1.6.6.1.6.1.1 monAPStatsTotHTPkts .1.3.6.1.4.1.14823.2.2.1.6.6.1.6.1.2 monAPStatsTotHTBytes .1.3.6.1.4.1.14823.2.2.1.6.6.1.6.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monStaPhyType .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.25 monStaRSSI .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.26 monStaFrameReceiveErrorRate .1.3.6.1.4.1.14823.2.2.1.6.6.2.1.1.27 wlsxMonStaRateStatsTable .1.3.6.1.4.1.14823.2.2.1.6.6.2.2 wlsxMonStaRateStatsEntry .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1 monStaTxPktsAt1Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.1 monStaTxBytesAt1Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monStaRxBytesAt11Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.30 monStaRxPktsAt6Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.31 monStaRxBytesAt6Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.32 monStaRxPktsAt12Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.33 monStaRxBytesAt12Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.34 monStaRxPktsAt18Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.35 monStaRxBytesAt18Mbps .1.3.6.1.4.1.14823.2.2.1.6.6.2.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID monStaTxDataBytes .1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.6 monStaRxMgmtPkts .1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.7 monStaRxMgmtBytes .1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.8 monStaRxCtrlPkts .1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.9 monStaRxCtrlBytes .1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.10 monStaRxDataPkts .1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.11 monStaRxDataBytes .1.3.6.1.4.1.14823.2.2.1.6.6.2.4.1.12 wlsxMonStaPktSizeStatsTable .1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxMonAPInfoEntry .1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1 monAPInfoPhyType .1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.1 monAPInfoCurrentChannel .1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.2 monAPInfoClassification .1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.3 monAPInfoESSID .1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.4 monAPInfoRSSI .1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.5 monAPInfoMonitorTime .1.3.6.1.4.1.14823.2.2.1.6.7.1.1.1.6 monAPInfoInactivityTime .
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxSNRGroup .1.3.6.1.4.1.14823.2.2.1.7.1 wlsxAPSnrTable .1.3.6.1.4.1.14823.2.2.1.7.1.1 wlsxAPSnrEntry .1.3.6.1.4.1.14823.2.2.1.7.1.1.1 apSnrAverageSignalStrength .1.3.6.1.4.1.14823.2.2.1.7.1.1.1.1 apSnrSignalPkts .1.3.6.1.4.1.14823.2.2.1.7.1.1.1.2 apSnrHighestRxSignalStrength .1.3.6.1.4.1.14823.2.2.1.7.1.1.1.3 apSnrLowestRxSignalStrength .1.3.6.1.4.1.14823.2.2.1.7.1.1.1.4 apSnrSampleTime .1.3.6.1.4.1.14823.2.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID authServerType .1.3.6.1.4.1.14823.2.2.1.8.1.1.1.2 authServerAddress .1.3.6.1.4.1.14823.2.2.1.8.1.1.1.3 authServerPort .1.3.6.1.4.1.14823.2.2.1.8.1.1.1.4 authServerRetryCount .1.3.6.1.4.1.14823.2.2.1.8.1.1.1.5 authServerTimeOutValue .1.3.6.1.4.1.14823.2.2.1.8.1.1.1.6 authServerState .1.3.6.1.4.1.14823.2.2.1.8.1.1.1.7 authServerInservice .1.3.6.1.4.1.14823.2.2.1.8.1.1.1.8 authServerUsageCount .1.3.6.1.4.1.14823.2.2.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID mobilityDomainStatus .1.3.6.1.4.1.14823.2.2.1.9.1.1.1.3 wlsxMobilityHomeAgentTable .1.3.6.1.4.1.14823.2.2.1.9.1.3 wlsxMobilityHomeAgentEntry .1.3.6.1.4.1.14823.2.2.1.9.1.3.1 mobilityHomeAgentSubnet .1.3.6.1.4.1.14823.2.2.1.9.1.3.1.1 mobilityHomeAgentMask .1.3.6.1.4.1.14823.2.2.1.9.1.3.1.2 mobilityHomeAgentIp .1.3.6.1.4.1.14823.2.2.1.9.1.3.1.3 mobilityHomeAgentVlan .1.3.6.1.4.1.14823.2.2.1.9.1.3.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID mobilityProxyDHCPNoHomeVlan .1.3.6.1.4.1.14823.2.2.1.9.3.8 mobilityProxyDHCPUnexpFrame .1.3.6.1.4.1.14823.2.2.1.9.3.9 mobilityProxyDHCPUnexpRemote .1.3.6.1.4.1.14823.2.2.1.9.3.10 wlsxMobilityHAStatsGroup .1.3.6.1.4.1.14823.2.2.1.9.4 mobilityHARxRRQ .1.3.6.1.4.1.14823.2.2.1.9.4.1 mobilityHASentRRP .1.3.6.1.4.1.14823.2.2.1.9.4.2 mobilityHARRQAccept .1.3.6.1.4.1.14823.2.2.1.9.4.3 mobilityHARRQDenied .1.3.6.1.4.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxESIConfigGroup .1.3.6.1.4.1.14823.2.2.1.10.1 wlsxESIServerTable .1.3.6.1.4.1.14823.2.2.1.10.1.1 wlsxESIServerEntry .1.3.6.1.4.1.14823.2.2.1.10.1.1.1 esiServerName .1.3.6.1.4.1.14823.2.2.1.10.1.1.1.1 esiServerGroup .1.3.6.1.4.1.14823.2.2.1.10.1.1.1.2 esiServerMode .1.3.6.1.4.1.14823.2.2.1.10.1.1.1.3 esiServerTrustedIP .1.3.6.1.4.1.14823.2.2.1.10.1.1.1.4 esiServerUntrustedIP .1.3.6.1.4.1.14823.2.2.1.10.1.1.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID voiceCdrDir .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.6 voiceCdrOrigTime .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.7 voiceCdrSetupTime .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.8 voiceCdrTeardownTime .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.9 voiceCdrStatus .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.10 voiceCdrReason .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.11 voiceCdrDuration .1.3.6.1.4.1.14823.2.2.1.12.1.1.2.1.12 voiceCdrRValue .1.3.6.1.4.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxVoiceClientTable .1.3.6.1.4.1.14823.2.2.1.12.1.3.2 wlsxVoiceClientEntry .1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1 voiceClientIp .1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.1 voiceClientProtocol .1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.2 voiceClientRegState .1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.3 voiceClientContactName .1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.4 voiceClientServerName .1.3.6.1.4.1.14823.2.2.1.12.1.3.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxMeshMIB .1.3.6.1.4.1.14823.2.2.1.13 wlsxMeshInfoGroup .1.3.6.1.4.1.14823.2.2.1.13.1 wlsxMeshPointGroup .1.3.6.1.4.1.14823.2.2.1.13.1.1 wlsxMeshPointTotal .1.3.6.1.4.1.14823.2.2.1.13.1.1.1 wlsxMeshPointTable .1.3.6.1.4.1.14823.2.2.1.13.1.1.2 wlsxMeshPointEntry .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1 wlsxMeshRole .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.1 wlsxMeshPointParent .1.3.6.1.4.1.14823.2.2.1.13.1.1.2.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxTotalNumOfUsers6 .1.3.6.1.4.1.14823.2.2.1.14.1.1 wlsxUser6Table .1.3.6.1.4.1.14823.2.2.1.14.2 wlsxUser6Entry .1.3.6.1.4.1.14823.2.2.1.14.2.1 nUser6PhyAddress .1.3.6.1.4.1.14823.2.2.1.14.2.1.1 nUser6IpAddress .1.3.6.1.4.1.14823.2.2.1.14.2.1.2 nUser6Name .1.3.6.1.4.1.14823.2.2.1.14.2.1.3 nUser6Role .1.3.6.1.4.1.14823.2.2.1.14.2.1.4 nUser6UpTime .1.3.6.1.4.1.14823.2.2.1.14.2.1.5 nUser6AuthenticationMethod .1.3.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID nUser6DNBWContractUsage .1.3.6.1.4.1.14823.2.2.1.14.2.1.32 nUser6DNBWContractId .1.3.6.1.4.1.14823.2.2.1.14.2.1.33 nUser6HTMode .1.3.6.1.4.1.14823.2.2.1.14.2.1.34 nUserForwardMode 1.3.6.1.4.1.14823.2.4.1.2.1.35 wlsxUser6SessionTimeTable .1.3.6.1.4.1.14823.2.2.1.14.3 wlsxUser6SessionTimeEntry .1.3.6.1.4.1.14823.2.2.1.14.3.1 wlsxUser6SessionTimeLength .1.3.6.1.4.1.14823.2.2.1.14.3.1.1 wlsxUser6SessionTimeCount .1.3.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxTrapRogueIfoURL .1.3.6.1.4.1.14823.2.3.1.11.1.1.22 wlsxTrapVlanId .1.3.6.1.4.1.14823.2.3.1.11.1.1.23 wlsxTrapAdminStatus .1.3.6.1.4.1.14823.2.3.1.11.1.1.24 wlsxTrapOperStatus .1.3.6.1.4.1.14823.2.3.1.11.1.1.25 wlsxTrapAuthServerName .1.3.6.1.4.1.14823.2.3.1.11.1.1.26 wlsxTrapAuthServerTimeout .1.3.6.1.4.1.14823.2.3.1.11.1.1.27 wlsxTrapCardSlot .1.3.6.1.4.1.14823.2.3.1.11.1.1.28 wlsxTrapTemperatureValue .1.3.6.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxTrapAPRadioNumber .1.3.6.1.4.1.14823.2.3.1.11.1.1.56 wlsxTrapRogueInfoURL .1.3.6.1.4.1.14823.2.3.1.11.1.1.57 wlsxTrapInterferingAPInfoURL .1.3.6.1.4.1.14823.2.3.1.11.1.1.58 wlsxTrapPortNumber .1.3.6.1.4.1.14823.2.3.1.11.1.1.59 wlsxTrapTime .1.3.6.1.4.1.14823.2.3.1.11.1.1.60 wlsxTrapHostIp .1.3.6.1.4.1.14823.2.3.1.11.1.1.61 wlsxTrapHostPort .1.3.6.1.4.1.14823.2.3.1.11.1.1.62 wlsxTrapConfigurationId .1.3.6.1.4.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxTrapDeviceIpAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.90 wlsxTrapDeviceMac 1.3.6.1.4.1.14823.2.3.1.11.1.1.91 wlsxTrapVcIpAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.92 wlsxTrapVcMacAddress 1.3.6.1.4.1.14823.2.3.1.11.1.1.93 wlsxTrapAPName 1.3.6.1.4.1.14823.2.3.1.11.1.1.94 wlsxTrapApMode 1.3.6.1.4.1.14823.2.3.1.11.1.1.95 wlsxTrapAPPrevChannel 1.3.6.1.4.1.14823.2.3.1.11.1.1.96 wlsxTrapAPPrevChannelSec 1.3.6.1.4.1.14823.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxNAuthServerReqTimedOut .1.3.6.1.4.1.14823.2.3.1.11.1.2.1019 wlsxNAuthServerTimedOut .1.3.6.1.4.1.14823.2.3.1.11.1.2.1020 wlsxNAuthServerIsUp .1.3.6.1.4.1.14823.2.3.1.11.1.2.1021 wlsxNAuthMaxUserEntries .1.3.6.1.4.1.14823.2.3.1.11.1.2.1022 wlsxNAuthMaxAclEntries .1.3.6.1.4.1.14823.2.3.1.11.1.2.1023 wlsxNAuthMaxBWContracts .1.3.6.1.4.1.14823.2.3.1.11.1.2.1024 wlsxNPowerSupplyFailure .1.3.6.1.4.1.14823.2.3.1.11.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxUnsecureAPDetected .1.3.6.1.4.1.14823.2.3.1.11.1.2.1053 wlsxUnsecureAPResolved .1.3.6.1.4.1.14823.2.3.1.11.1.2.1054 wlsxStaImpersonation .1.3.6.1.4.1.14823.2.3.1.11.1.2.1055 wlsxReservedChannelViolation .1.3.6.1.4.1.14823.2.3.1.11.1.2.1056 wlsxValidSSIDViolation .1.3.6.1.4.1.14823.2.3.1.11.1.2.1057 wlsxChannelMisconfiguration .1.3.6.1.4.1.14823.2.3.1.11.1.2.1058 wlsxOUIMisconfiguration .1.3.6.1.4.1.14823.2.3.1.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxChannelRateAnomaly .1.3.6.1.4.1.14823.2.3.1.11.1.2.1087 wlsxNodeRateAnomalyAP .1.3.6.1.4.1.14823.2.3.1.11.1.2.1088 wlsxNodeRateAnomalySta .1.3.6.1.4.1.14823.2.3.1.11.1.2.1089 wlsxEAPRateAnomaly .1.3.6.1.4.1.14823.2.3.1.11.1.2.1090 wlsxSignalAnomaly .1.3.6.1.4.1.14823.2.3.1.11.1.2.1091 wlsxSequenceNumberAnomalyAP .1.3.6.1.4.1.14823.2.3.1.11.1.2.1092 wlsxSequenceNumberAnomalySta .1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxUserEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.1121 wlsxAPBssidEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.1122 wlsxAPRadioEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.1123 wlsxAPEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.1124 wlsxSwitchListEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.1125 wlsxPortEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.1126 wlsxVlanEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxTunnelDown .1.3.6.1.4.1.14823.2.3.1.11.1.2.1155 wlsxMeshNodeEntryChanged .1.3.6.1.4.1.14823.2.3.1.11.1.2.1156 wlsxHtGreenfieldSupported .1.3.6.1.4.1.14823.2.3.1.11.1.2.1157 wlsxHT40MHzIntoleranceAP .1.3.6.1.4.1.14823.2.3.1.11.1.2.1158 wlsxHT40MHzIntoleranceSta .1.3.6.1.4.1.14823.2.3.1.11.1.2.1159 wlsxNAuthServerAllInService 1.3.6.1.4.1.14823.2.3.1.11.1.2.1160 wlsxNAdhocNetwork 1.3.6.1.4.1.14823.2.3.1.11.1.2.
Table 128 SNMP OIDs for Aruba Enterprise MIB modules (Continued) SNMP MIB OID wlsxMalformedAuthFrame 1.3.6.1.4.1.14823.2.3.1.11.1.2.1189 wlsxCTSRateAnomaly 1.3.6.1.4.1.14823.2.3.1.11.1.2.1190 wlsxRTSRateAnomaly 1.3.6.1.4.1.14823.2.3.1.11.1.2.1191 wlsxNRogueAPDetected 1.3.6.1.4.1.14823.2.3.1.11.1.2.1192 wlsxNRogueAPResolved 1.3.6.1.4.1.14823.2.3.1.11.1.2.1193 wlsxNeighborAPDetected 1.3.6.1.4.1.14823.2.3.1.11.1.2.1194 wlsxNInterferingAPDetected 1.3.6.1.4.1.14823.2.3.1.11.1.2.
| SNMP MIBs Reference Dell PowerConnect W-Series ArubaOS 6.
Index Numerics 20 MHz channel assignment 146 40 MHz channel assignment 146 802.11n zone 98 802.1x authentication configuring 269 A AC mappings 636 types 636 access category.
D dead peer detection configuring 374 deployment considerations, mesh 214 DHCP client 73 DHCP with option 43 709 dialer configuring 374 don’t care 98 don’t deploy 98 double encryption 182 duplicate AP names 115 duplicate names 115 E enable mode password reset 535 Enable password bypassing 535 resetting 534 example configuration 802.
troubleshooting 237 tunneling 236 wired AP profile 235 mesh cluster 206 mesh link creating 207 overview 207 mesh nodes, provisioning 206, 237 mesh path 206 mesh point behavior 206 boot sequence 240 overview 206 mesh portal behavior 206 boot sequence 240 overview 206 mesh service set identifier. See MSSID migration 453 mobile client 429 mobility domain 429 configuring 430 example configuration 432 Mounting Devices 473 MP. See mesh point MPP.
role model access points 109 model air monitors 109 run RF Plan 111 run the AM plan 112 up AP icon 95 assigning 307 configuring 304 roles predefined 720 route-mode topology 673 S secure jack and mesh 236 server derivation rules configuring 310 server group assigning 263 configuring 247, 257 server rules configuring 261 server-derived role 308 site-to-site VPN configuring 370 smart card authentication 552, 553 SNMP configuring 544 solutions, mesh overview 211 point-to-multi-point 212 point-to-point 212 w
X xSec configuring 345 configuring for wired clients 347 configuring for wireless clients 346 configuring wireless clients 349 A access point ............................................................... 35 agent ....................................................................... 139 air monitor ................................................................ 35 Alarm analog ................................................................. 21 discrete ................................................
sysExtSwitchSWVersion ........................... 314 sysXMemoryFree ....................................... 239 sysXMemorySize ........................................ 239 sysXMemoryUsed ...................................... 239 sysXProcessorDescr.................................... 235 sysXProcessorID ........................................ 235 sysXProcessorLoad ..................................... 235 sysXStorageIndex....................................... 237 sysXStorageName .........................
wlanAPStatsTotDAMulticastPkts ............ 555 wlanAPStatsTotDataBytes ........................ 558 wlanAPStatsTotDataPkts .......................... 558 wlanAPStatsTotDAUnicastBytes .............. 556 wlanAPStatsTotDAUnicastPkts ................ 555 wlanAPStatsTotMgmtBytes ...................... 557 wlanAPStatsTotMgmtPkts ........................ 557 wlanAPStatsTotPktsAt11Mbps ................. 532 wlanAPStatsTotPktsAt12Mbps ................. 533 wlanAPStatsTotPktsAt18Mbps .................
ArubaOS 2.5 wlanAPFrameReceiveErrorRate ................ 526 wlanAPRxDataBytes .................................. 526 wlanAPRxDataPkts .................................... 526 wlanAPTxDataBytes .................................. 527 wlanAPTxDataPkts.................................... 526 wlsxSysExtControllerConfigID ................ 297 wlsxSysExtIsMMSConfigUpdateEnabled 297 wlsxSysExtMMSConfigID ........................ 297 wlsxSysExtSwitchLastReload .................... 297 ArubaOS 3.1 ArubaCallStates ..
wlsxMonStationEntryChanged................. 402 wlsxNAccessPointIsDown ......................... 384 wlsxNAccessPointIsUp .............................. 384 wlsxNAuthMaxAclEntries ......................... 381 wlsxNAuthMaxBWContracts ................... 381 wlsxNAuthMaxUserEntries ....................... 381 wlsxNAuthServerIsDown .......................... 398 wlsxNAuthServerIsUp ............................... 381 wlsxNAuthServerReqTimedOut ............... 380 wlsxNAuthServerTimedOut .....................
nUserDNBWContractUsage..................... 439 nUserExtVPNAddress ............................... 431 nUserMobilityDomainName .................... 437 nUserMobilityStatus ................................. 433 nUserPhyType ........................................... 437 nUserUPBWContractId ............................ 437 nUserUPBWContractName ..................... 437 nUserUPBWContractUsage ..................... 437 oiceCdrHandovers ..................................... 473 voiceAPBssid100Sent ............
wlsxVoiceClientTable ............................... 480 wlsxVoiceClientTotal ................................ 480 wlsxWlanESSIDEntry ............................... 514 ArubaOS 3.3 ArubaHTExtChannel ................................ 330 ArubaHTMode .......................................... 328 IPv6 Authentication Traps ........................ 288 monAPInfoHTMode ................................. 209 monStaInfoHTMode................................. 213 monStaRxHTBytes ....................................
wlanAPStatsTotPktsAtHT13Mbps ........... 537 wlanAPStatsTotPktsAtHT150Mbps ......... 550 wlanAPStatsTotPktsAtHT15Mbps ........... 538 wlanAPStatsTotPktsAtHT162Mbps ......... 550 wlanAPStatsTotPktsAtHT180Mbps ......... 551 wlanAPStatsTotPktsAtHT19dot5Mbps ... 539 wlanAPStatsTotPktsAtHT216Mbps ......... 551 wlanAPStatsTotPktsAtHT240Mbps ......... 552 wlanAPStatsTotPktsAtHT243Mbps ......... 552 wlanAPStatsTotPktsAtHT26Mbps ........... 539 wlanAPStatsTotPktsAtHT270Mbps .........
wlsxNSignatureMatchAsleap .................... 419 wlsxNSignatureMatchDeauthBcast .......... 420 wlsxNSignatureMatchDisassocBcast ........ 420 wlsxNSignatureMatchNetstumbler .......... 419 wlsxNSignatureMatchNullProbeResp ...... 420 wlsxNSignatureMatchWellenreiter .......... 421 wlsxNStaUnAssociatedFromUnsecureAP 413 wlsxNSuspectRogueAPDetected .............. 418 wlsxNSuspectRogueAPResolved ............... 418 wlsxOmertaAttack ..................................... 413 wlsxOverflowEAPOLKeyDetected ..........
| Index Dell PowerConnect ArubaOS 6.
