Reference Guide

24 |Using MIBs Dell PowerConnect W-Series ArubaOS 6.0 MIB | Reference Guide
Figure 3 shows how information may be obtained through a graphical user interface ( GUI). The user interface
and the available features vary by application.
Figure 3 Graphical User Interface
WLAN Health Information
This sections lists frequently used MIBs for system health checks. Examples of executing a command via CLI are
also provided. Health check information can be acquired through other MIB browsers, as described in “MIB
Browsers” on page23.
.
z Number of Current Authentications per AP z Frame Retry Rate per AP Channel
z Number of Current APs per Controller z Frame Low-Speed Rate per AP Channel
z Number of Down APs per Controller z Frame Receive Errors per AP Channel
z Number of Successful 802.1x Authentications z Total Current Channel Bandwidth (kbps) per AP
z Number of Rogue APs per Controller—Count per
Building
z Tx Packets per AP BSSID (32-bit counter)
z Number of Interfering APs per Controller z Tx Bytes per AP BSSID (32-bit counter)
z Noise Level per AP z Rx Packets per AP BSSID (32-bit counter)
z AP Information from Master Controller z Rx Bytes per AP BSSID (32-bit counter)
z Information from Any AP z Total Bandwidth per AP BSSID (kbps)
z Frame Retry Rate per AP BSSID z Free Memory