Users Guide

102 | The Basic User-Centric Networks Dell Networking W-Series ArubaOS 6.4.x| User Guide
4. Configure the SSID(s) with VLAN 1 as the assigned VLAN for all users.
Deployment Scenario #2: APs All on One Subnet Different from Controller Subnet
Figure 2 APs All on One Subnet Different from Controller Subnets
In this deployment scenario, the APs and the controller are on different subnetworks and the APs are on
multiple subnetworks. The controller acts as a router for the wireless subnetworks (the controller is the default
gateway for the wireless clients). The uplink port on the controller is connected to a layer-2 switch or router;
this port is an access port in VLAN 1.
For this scenario, you must perform the following tasks:
1. Run the initial setup wizard.
l Set the IP address for VLAN 1.
l Set the default gateway to the IP address of the interface of the upstream router to which you will
connect the controller.
2. Connect the uplink port on the controller to the switch or router interface.