Users Guide

Figure 5 Control Plane Security Settings
4. Click Entries in the upper right corner of the whitelist status window.
5. Click New.
6. Define the following parameters for each AP you want to add to the APwhitelist.
Parameter Description
Campus AP whitelist configuration parameters
AP MAC Address MAC address of campus AP that supports secure communications to and
from its controller.
AP Group Name of the AP group to which the campus AP is assigned. If you do not
specify an AP group, the APuses default as its AP group.
AP Name Name of the campus AP. If you do not specify a name, the AP uses its
MAC address as AP name.
Description Brief description of the campus AP.
Remote AP whitelist configuration parameters
AP MAC Address MAC address of the remote AP, in colon-separated octets.
User Name Name of the end user who provisions and uses the remote AP.
AP Group Name of the AP group to which the Remote AP is assigned.
AP Name Name of the Remote AP. If you do not specify a name, the AP uses its
MAC address as AP name.
Description Brief description of the Remote AP.
IP-Address The static inner IP address to be assigned to the Remote APs.
Table 20: AP Whitelist Parameters
Dell Networking W-Series ArubaOS 6.4.x | User Guide Control Plane Security | 124