Users Guide
Figure 23 Layer-2 GRE Tunnel UI Configuration for Controller-1
4. Enter the corresponding GRE tunnel values for this controller.
5. Click Apply.
Controller-2
1. Log into Controller-2.
2. Navigate to Configuration > Network > IP > GRE Tunnels.
3. Highlight the line for the tunnel ID of interest and click Edit.
The Edit GRE Tunnel screen appears (the tunnel IDalso displayed).
Figure 24 displays the values that would be entered into the Edit GRE Tunnel screen to configure
Controller-2 based on the network shown in Figure 19.
Dell Networking W-Series ArubaOS 6.4.x | User Guide Network Configuration Parameters | 184