Users Guide

234 | OSPFv2 Dell Networking W-Series ArubaOS 6.4.x| User Guide
Figure 38 Edit OSPF VLAN Settings
OSPF monitoring is available from an IP Routing sub-section (Controller > IP Routing > Routing). Both Static
and OSPF routes are available in table format.
OSPF Interfaces and Neighboring information is available from the OSPF tab. The Interface information
includes transmit (TX) and receive (RX) statistics.
Exporting VPN Client Addresses to OSPF
You can configure VPN client addresses so that they can be exported to OSPF and be advertised as host routes
(/32). Exporting applies to any VPN client address regardless of how it is assigned.
In the WebUI
1. Navigate to the Configuration > Advanced Services > All Profiles > VPN Authentication > default
page.
2. (Optional) Regardless of how an authentication server is contacted, the Export VPN IP address as a
route option causes any VPN client address to be exported to OSPF using IPC. Note that the Framed-IP-
Address attribute is assigned the IP address as long as any server returns the attribute. The Framed-IP-
Address value always has a higher priority than the local address pool.
3. Click Apply.
In the CLI
(host) (config) #aaa authentication vpn default
(host) (VPN Authentication Profile "default") #
(host) (VPN Authentication Profile "default") # export-route
Use the show ip ospf database command to show LSA types that are generated.
Sample Topology and Configuration
The figure below displays a sample OSPF topology followed by sample configurations of the Remote Branch 1,
Remote Branch 2, and the W-3200 Central Office Controller (Active and Backup).