Users Guide

301 | BranchController Config for Controllers Dell Networking W-Series ArubaOS 6.4.x| User Guide
The new branch config group appears in the Branch Config Group List table. This table displays the branch
config group name, validated/not validated status, and reboot status for each branch config group.
l Status: A status of Validated indicates that the branch config group has a complete configuration that can
be applied to branch controllers. (For example, a branch config group might have a status of Not Validated
if the branch config group does not have a IP address defined for the controller or a controller
VLANinterface.)
l Reboot Required: This field indicates that the branch config group includes a configuration change that
requires a reboot on the branch controllers using that config group.
The table below describes the time zone formats supported by the export-RemoteNode.csv template. Each
line in the table describes three or more time zone formats for a single location, though only one is required for
the template. For example, specify Edinburgh or UTC+00 or UTC or BST.