Users Guide

305 | BranchController Config for Controllers Dell Networking W-Series ArubaOS 6.4.x| User Guide
UTC- Time Zones UTC+Time Zones
l "Cayenne", "UTC-03", "BST"
l "Fortaleza", "UTC-03", "BST"
l "Greenland", "UTC-03", "BST", "GRED"
l "Montevideo", "UTC-03", "BST," "UYST"
l "Salvador", "UTC-03", "BST", "BRST"
l "Mid-Atlantic", "UTC-02", "FNT"
l "Azores", "UTC-01", "AZOST", "AZOST"
l "Cape-Verde-Is", "UTC-01", "CVT"
l "Nukualofa", "UTC+13"
l "Samoa", "UTC+13"
Table 62: Supported Branch Config Group Time Zone Formats
System Configuration
Configure general system settings for the branch controllers in a branch config group by navigating to
Configuration>Branch>Smart Config and selecting the System tab. The settings on the System tab are
described in the table below.
Parameter Description
General
System Contact An alphanumeric string that specifies the name of the system contact for the controller
Admin User The name of a system admin user
Admin Password The password for the system admin user
Servers
W-AirWave Server (Optional) IPaddress of the W-AirWave server, if the branch office controller is managed or
monitored by W-AirWave.
Syslog Server (Optional) IPaddress of an external syslog server. You will define syslog facility levels in sub-
sequent configuration fields on this page.
Domain Name
Server
IP address of the domain server.
Captive Portal
Server Certificate
(Optional) Certificate to be used for captive-portal authentication.
Time Zone Time zone for the branch office controller. Click the DST checkbox if the selected timezone is
currently using daylight-savings time.
RADIUS interface
source VLAN
This field identifies the interface for outgoing RADIUS packets. The IP address of the specified
interface is included in the IP header of RADIUS packets.
Figure 46 Branch Config Group System Settings