Users Guide

Parameter Description
User VLANs
VLANID Identifier for the VLAN.
Description Text string describing the VLAN.
NAT Inside Click this checkbox to enable source NAT for this VLAN.
BCMCOptimization Click this checkbox to effectively prevent flooding of BCMC traffic on all VLAN member ports.
This option ensures controlled flooding of BCMC traffic without compromising the client con-
nectivity.
Operstate Click this checkbox to select the operational state for the VLAN (Up or Down).
Named VLAN Mapping
Name Name assigned to an individual VLAN or group of VLANs (a VLAN pool).
VLAN Specify one or more VLAN IDs to associate the VLAN ID(s) to the VLAN name. For more
information on configuring named VLANs, see Configuring VLANs on page 164.
Uplink VLANs
VLAN ID Specify the VLANID of the wired uplink network connection used by the branch controller.
Priority Specify the priority of the VLAN by selecting a value from 101-255.
Description (Optional) text string used to describe the VLAN
Operstate Identify the VLANoperational state as UPor DOWN.
IP Address Specify whether the VLAN will receive its IP address using DHCP or PPPoE.
Ports
Port Settings:
l Port Enable
l Enable
l Description
l Trusted
l Speed/Duplex
l Mode
l Native VLAN
l Trunk/Access
Click Edit to edit the settings for an individual interface port, or to apply an access control list
(ACL) to inbound traffic, outbound traffic, or session traffic on a selected VLAN.
NOTE: For complete details on the PortFast andBPDU Guard features, see PortFast and
BPDU Guard on page 320. For more information on configuring the port settings for branch
controllers in a branch config group, see Configuring Ports on page 169 and Roles and
Policies on page 438.
Figure 47 Branch Controller Networking Settings.
Dell Networking W-Series ArubaOS 6.4.x | User Guide BranchController Config for Controllers | 308