Users Guide

363 | Stateful and WISPr Authentication Dell Networking W-Series ArubaOS 6.4.x| User Guide
Parameter Description
Default Role Default role assigned to users that complete WISPr authentication.
Logon wait minimum wait If the controller’s CPU utilization has surpassed the Login wait CPU
utilization threshold value, the Logon wait minimum wait
parameter defines the minimum number of seconds a user has to
wait to retry a login attempt. Range: 1–10 seconds. Default: 5
seconds.
Logon wait maximum wait If the controller’s CPU utilization has surpassed the Login wait
CPUutilization threshold value, the Logon wait maximum wait
parameter defines the maximum number of seconds a user has to
wait to retry a login attempt. Range: 1–10 seconds. Default: 10
seconds.
Logon wait CPU utilization
threshold
Percentage of CPU utilization at which the maximum and minimum
login wait times are enforced. Range: 1–100%. Default: 60%.
WISPr Location-ID ISO Country
Code
The ISO Country Code section of the WISPr Location ID.
WISPr Location-ID E.164 Country
Code
The E.164 Country Code section of the WISPr Location ID.
WISPr Location-ID E.164 Area
Code
The E.164 Area Code section of the WISPr Location ID.
WISPr Location-ID SSID/Zone The SSID/Zone section of the WISPr Location ID.
WISPr Operator Name A name identifying the hotspot operator.
WISPr Location Name A name identifying the hotspot location. If no name is defined, the
parameter uses the name of the associated AP.
Table 72: WISPr Authentication Profile Parameters
5. Click Apply.
6. In the Profiles list, select the Server Group entry below the WISPr Authentication profile.
7. Click the Server Group drop-down list and select the group of RADIUS servers you want to use for WISPr
authentication.
8. Click Apply.
A Boingo smart client uses a NAS identifier in the format <CarrierID>_<VenueID> for location identification. To
support Boingo clients, you must also configure the NAS identifier parameter in the Radius server profile for the
WISPr server
In the CLI
Use the CLI commands below to configure WISPr authentication. The first set of commands defines the
RADIUS server used for WISPr authentication, and the second set adds that server to a server group. The third