Users Guide
Table Of Contents
- Installation Guide
- Installationsanleitung
- Inhalt
- Zu diesem Handbuch
- PowerConnect W-3000 Serie Controller
- Installieren des W-3000 Serie Controller
- Technische Daten, Sicherheit und Konformität
- Guide d’installation
- Table des matières
- À propos de ce guide
- À propos des contrôleurs Dell PowerConnect Série W-3000
- Installation du contrôleur Série W-3000
- Spécifications, sécurité et conformité
- Guía de instalación
- Contenido
- Acerca de esta guía
- Acerca de los controladores PowerConnect Serie W-3000
- Instalación de los controladores Serie W-3000
- Especificaciones, seguridad y cumplimiento
- Guia de instalação
- Índice
- Sobre este guia
- Sobre os Controladores Série W-3000 PowerConnect
- Instalação dos Controladores Série W-3000
- Especificações, segurança e conformidade
- Kurulum Kılavuzu
- İçindekiler
- Bu Kılavuz Hakkında
- PowerConnect W-3000 Serisi Denetleyiciler Hakkında
- W-3000 Serisi Denetleyiciler Kurulumu
- Spesifikasyonlar, Güvenlik ve Uygunluk
- 設置ガイド
- 설치 안내서
- 安裝指南
- 安装指南
- Panduan Instalasi
- מדריך התקנה
14 | Installing the W-3000 Series Controllers Dell PowerConnect W-3000 Series Controller | Installation Guide
Figure 1 Rack Mount Brackets
4. Mount the controller within your organization’s rack system using four 12-24 x 5/8” phillips flat head screws
and a suitable screwdriver (see Figure 2).
Figure 2 Rack Mount Installation
5. Leave a minimum of four inches (10 cm) of space on the left and right side of the unit for proper air flow and
ventilation (see Figure 3).
6. Leave additional space in the front and back of the unit to access power cords, network cables, and LED status
indicators (see Figure 3).
Rack Mount Bracket (2x)
W-3000 Series Controllers Multi-
Service Controller
6-32 x 1/4” Phillips Flat Head Screws (6x,
3x per bracket)
Standard 19-inch
Rack System
12-24 x 5/8”
Phillips Flat Head Screws
(4x, 2x per bracket)
W-3000 Series Controllers
Multi-Service Controller with Rack
Mount Brackets