Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show rf event-thresholds-profile | 1000
show rf event-thresholds-profile
show rf event-thresholds-profile [<profile>]
Description
Show an Event Thresholds profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire Event Thresholds profile list,
including profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has two configured Event Thresholds profiles. The References
column lists the number of other profiles with references to the Event Thresholds profile, and the Profile Status
column indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile
Status column.
This example displays the configuration settings for the profile default.
Parameter Description
<profile> name of an Event Thresholds profile
(host) # show rf event-thresholds-profile
RF Event Thresholds Profile List
--------------------------------
Name References Profile Status
---- ---------- --------------
default 6
event1 2
Total: 2
(host) # show rf event-thresholds-profile default
RF Event Thresholds Profile "default"
-------------------------------------
Parameter Value
--------- -----
Detect Frame Rate Anomalies Disabled
Bandwidth Rate High Watermark 0 %
Bandwidth Rate Low Watermark 0 %
Frame Error Rate High Watermark 0 %
Frame Error Rate Low Watermark 0 %
Frame Fragmentation Rate High Watermark 16 %
Frame Fragmentation Rate Low Watermark 8 %
Frame Low Speed Rate High Watermark 16 %
Frame Low Speed Rate Low Watermark 8 %
Frame Non Unicast Rate High Watermark 0 %
Frame Non Unicast Rate Low Watermark 0 %
Frame Receive Error Rate High Watermark 16 %
Frame Receive Error Rate Low Watermark 8 %
Frame Retry Rate High Watermark 16 %
Frame Retry Rate Low Watermark 8 %