Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show rf optimization-profile | 1004
show rf optimization-profile
show rf optimization-profile [<profile>]
Description
Show an Optimization profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the entire Optimization profile list, including
profile status and the number of references to each profile. Include a profile name to display detailed
configuration information for that profile.
Examples
The example below shows that the controller has two configured Optimization profiles. The References column
lists the number of other profiles with references to the Optimization profile, and the Profile Status column
indicates whether the profile is predefined. User-defined profiles will not have an entry in the Profile Status
column.
This example displays the configuration settings for the profile profile2.
Parameter Description
<profile> name of an ARM profile
(host) # show rf optimization-profile
RF Optimization Profile List
----------------------------
Name References Profile Status
---- ---------- --------------
default 6
profile2 1
Total:2
(host) #show rf optimization-profile profile2
RF Optimization Profile "profile2"
---------------------------------
Parameter Value
--------- -----
Station Handoff Assist Disabled
Detect Association Failure Disabled
Coverage Hole Detection Disabled
Hole Good RSSI Threshold 20
Hole Good Station Ageout 30 sec
Hole Detection Interval 180 sec
Hole Idle Station Ageout 90 sec
Hole Poor RSSI Threshold 10
Detect interference Disabled
Interference Threshold 90 %
Interference Threshold Exceed Time 25 sec
Interference Baseline Time 25 sec
RSSI Falloff Wait Time 0 sec
Low RSSI Threshold 0
RSSI Check Frequency 0 sec