Reference Guide

Table Of Contents
Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show snmp trap-host | 1024
show snmp trap-host
show snmp trap-host
Description
Displays the configured SNMP trap hosts.
Syntax
No parameters.
Example
The output of this command shows details of a SNMP trap host.
Command History
This command was available in ArubaOS 3.0
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers
(host) # show snmp trap-hosts
SNMP TRAP HOSTS
---------------
HOST VERSION SECURITY NAME PORT TYPE TIMEOUT RETRY
---- ------- ------------- ---- ---- ------- -----
10.16.14.1 SNMPv2c public 162 Trap N/A N/A