Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show tpm cert-info | 1045
show tpm cert-info
show tpm cert-info
Description
Displays the TPM and Factory Certificate information on MIPS controllers (W-3000, W-600 Series Controller).
Syntax
No parameters.
Usage Guidelines
Use this command to verify that TPM and factory certificates are installed as expected. This command should be
executed before enabling CPSec on MIPS controllers (W-3000, W-600 Series Controller).
Example
In the example below, the TPM and certificates are installed.
In the example below, the controller is not able to verify the TPM or Factory Certificate information.
Command History
Command Information
Release Modification
ArubaOS 5.0 Command introduced
Platforms Licensing Command Mode
MIPS controllers (W-3000, W-600 Series
Controller)
Base operating system Enable Mode
(host)#show tpm cert-info
subject= /CN=AF0000168::00:0b:86:f0:33:e0
issuer= /DC=com/DC=arubanetworks/DC=ca/CN=DEVICE-CA2
serial=1F023F05000000015087
notBefore=Jan 30 01:38:57 2009 GMT
notAfter=Jan 25 01:38:57 2029 GMT
(host)#show tpm cert-info
Cannot get TPM and Factory Certificate Info
TPM and/or Factory Certificates might be missing.