Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show vlan status | 1058
show vlan status
show vlan status <id>
Description
This command shows the current status of all VLANs on the controller.
Syntax
No parameters.
Usage Guidelines
Issue this command to show the status of VLANs on the controller.The VLAN ID column displays the VLAN ID
name or number. The IP Address column provides the VLAN’s IP address. The Adminstate column indicates if
the VLAN is enabled or disabled. The Operstate column indicates if the VLAN is currently up and running. The
PortCount column shows how many ports are associated with the VLAN. The Nat Inside column displays
whether source Nat is enabled for the VLAN interface. If Nat is enabled, all the traffic passing through this VLAN
interface is the source natted to the outgoing interface’s IP address..
Related Commands
(host) (config) #vlan
(host) (config) #vlan-name
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Platforms Licensing Command Mode
All platforms Base operating system Enable or config mode on master or local
controllers
(host) #show vlan status
Vlan Status
-----------
VlanId IPAddress Adminstate Operstate PortCount Nat Inside
------ --------- ---------- --------- --------- ----------
1 10.168.254.221/255.255.255.252 Enabled Up 5 Disabled
2 unassigned/unassigned Enabled Down 2 Disabled
4 unassigned/unassigned Enabled Down 1 Disabled
25 unassigned/unassigned Enabled Down 1 Disabled
212 10.168.212.2/255.255.255.0 Enabled Down 2 Disabled
213 10.168.213.2/255.255.255.0 Enabled Down 2 Disabled
1170 10.3.132.14/255.255.255.0 Enabled Up 2 Disabled