Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show vrrp | 1095
show vrrp
show vrrp <vrid>
Description
Displays the list of all VRRP configuration on the controller. To view a specific VRRP configuration, specify the
VRID number.
Syntax
No parameters.
Example
The output of this command shows the VRRP configuration enabled in one of the floors of the building.
Command History
Command Information
(host) # show vrrp
Virtual Router 2:
Description Floor-1 Settings
Admin State DOWN, VR State INIT
IP Address 10.15.1.10, MAC Address 00:00:5e:00:01:02, vlan 1
Priority 2, Advertisement 10 sec, Preemption Enable
Auth type PASSWORD, Auth data: 123456
tracking type is master-up-time, duration 500 minutes, value 3
tracking type is vrrp-master-state, vrid 10, value 1
tracking type is vlan, vlanid 1, subtract value 3
tracking type is interface, fastethernet 1/1, subtract value 3
tracked priority 2
Version Modification
ArubaOS 1.0 Command introduced
ArubaOS 3.3 The tracking interface and tracking vlan parameters were introduced.
ArubaOS 3.3.2 The add option was removed from the tracking interface and tracking vlan parameters.
Platforms Licensing Command Mode
All platforms Base operating system Config or Enable mode on master or local
controllers