Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show wlan dot11k-profile | 1097
show wlan dot11k-profile
show wlan dot11k-profile [<profile>]
Description
Show a list of all 802.11k profiles, or display detailed configuration information for a specific 802.11k profile.
Syntax
Usage Guidelines
Issue this command without the <profile> parameter to display the 802.11k profile list, including profile status
and the number of references to each profile. Include a profile name to display detailed configuration information
for that profile.
Examples
The example below shows that the controller has two configured 802.11k profiles. The References column lists
the number of other profiles with references to the 802.11k profile, and the Profile Status column indicates
whether the profile is predefined. (User-defined profiles will not have an entry in the Profile Status column.)
The following example shows configuration settings defined for the profile default.
The output of this command includes the following data columns:
Parameter Description
<profile> Name of an 802.11k profile.
Parameter Description
Advertise 802.11K Capability Shows if the profile has enabled or disabled the 802.11K feature.
Forcefully disassociate on-hook
voice clients
If enabled, the AP may forcefully disassociate clients that reach the maximum CAC peak
capacity or call handoff reservation.
(host) #show wlan dot11k-profile
802.11K Profile List
--------------------
Name References Profile Status
---- ---------- --------------
default 8
11kprofile2 1
Total: 2
(host) #show wlan dot11k-profile default
802.11K Profile "default"
-------------------------
Parameter Value
--------- -----
Advertise 802.11K Capability Disabled
Forcefully disassociate on-hook voice clients Disabled
Measurement Mode for Beacon Reports beacon-table
Configure specific channel for Beacon Requests Disabled
Channel requested for Beacon Reports in 'A' band 36
Channel requested for Beacon Reports in 'BG' band 1
Time duration between consecutive Beacon Requests 60 sec
Time duration between consecutive Link Measurement Requests 60 sec
Time duration between consecutive Transmit Stream Measurement Requests 90 sec