Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show wlan virtual-ap | 1111
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Mobile IP Shows if the profile has enabled or disabled IP mobility.
HA Discovery on-
association
If enabled, all clients of a virtual-ap will received mobility service on association.
DoS Prevention If enabled, APs ignore deauthentication frames from clients. This prevents a successful
deauth attack from being carried out against the AP. This does not affect third-party APs.
Station Blacklisting Shows if the profile has enabled or disabled detection of denial of service (DoS) attacks,
such as ping or SYN floods, that are not spoofed deauth attacks.
Dynamic Multicast
Optimization (DMO)
If enabled DMO techniques will be used to reliably transmit video data.
Dynamic Multicast
Optimization (DMO)
Threshold
Maximum number of high-throughput stations in a multicast group beyond which dynamic
multicast optimization stops
Blacklist Time Number of seconds that a client is quarantined from the network after being blacklisted.
Authentication Failure
Blacklist Time
Time, in seconds, a client is blocked if it fails repeated authentication. An authentication
failure blacklist time of 0 blocks failed users indefinitely.
Multi Association If enabled, this feature allows a station to be associated to multiple APs. If this feature is
disabled, when a station moves to new AP it will be de authorized by the AP to which it was
previously connected, deleting station context and flushing key caching information
Fast Roaming Shows if the AP has enabled or disabled fast roaming.
Strict Compliance If enabled, the AP denies client association requests if the AP and client station have no
common rates defined. Some legacy client stations which are not fully 802.11-compliant
may not include their configured rates in their association requests. Such non-compliant
stations may have difficulty associating with APs unless strict compliance is disabled.
VLAN Mobility Shows if the AP has enabled or disabled VLAN (Layer-2) mobility.
Remote-AP Operation Shows how the virtual AP operates on a remote AP:
z always: Permanently enables the virtual AP.
z backup: Enables the virtual AP if the remote AP cannot connect to the controller.
z persistent: Permanently enables the virtual AP after the remote AP initially connects to
the controller.
z standard: Enables the virtual AP when the remote AP connects to the controller.
Drop Broadcast and
Multicast
If enabled, the virtual AP will filter out broadcast and multicast traffic in the air.
Convert Broadcast ARP
requests to unicast
If enabled, all broadcast ARP requests are converted to unicast and sent directly to the
client
Band Steering If enabled, ARM’s band steering feature encourages dual-band capable clients to stay on
the 5GHz band on dual-band APs. This frees up resources on the 2.4GHz band for single
band clients like VoIP phones.
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master or local controllers.
Parameter Description