Reference Guide

1126 | show wms probe Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
show wms probe
show wms probe
Description
Display detailed information for a list of WMS probes.
Syntax
No parameters.
Example
This example shows the Probe List table for WMS probes.
The output of this command includes the following information:
(host) #show wms probe
Probe List
----------
Monitor Eth MAC BSSID PHY Type IP LMS IP Scan Status Updates Reqs Stats Type
--------------- ----- -------- -- ------ ---- ------ ------- ---- ----- ----
00:0b:86:cd:11:64 00:0b:86:51:16:48 80211A 10.13.11.19 10.6.2.250 No Up 1893 0 11544 soft-
ap
00:1a:1e:c2:2c:c4 00:1a:1e:a2:cc:40 80211G 10.6.1.220 10.6.2.250 Yes Up 940 1 40796 air-
monitor
00:0b:86:c1:be:56 00:0b:86:9b:e5:60 80211G 10.6.14.79 10.6.2.250 No Up 927 0 30711 soft-
ap
00:0b:86:c4:4d:06 00:0b:86:c4:d0:70 80211A 10.6.14.78 10.6.2.250 No Up 926 0 11339 soft-
ap
00:1a:1e:c2:30:80 00:1a:1e:a3:08:00 80211G 10.6.1.235 10.6.2.250 Yes Up 1425 0 26171 air-
monitor
00:1a:1e:c2:2c:ba 00:1a:1e:a2:cb:a0 80211G 10.6.1.231 10.6.2.250 Yes Up 971 1 21005 air-
monitor
00:1a:1e:c9:16:f0 00:1a:1e:11:6f:10 80211AHT-40mhz 10.6.1.204 10.6.2.250 No Up 969 0 17813 soft-
Column Description
Monitor Eth MAC Ethernet MAC address of a probe.
BSSID Probe Radio BSSID.
PHY Type Radio PHY type:
z 802.11A
z 802.11AHT-40Mbps
z 802.11AHT-20Mbps
z 802.11G
z 802,11GHT-20Mbps
IP IP address of the AP.
LMS IP IP address of the AP’s local controller.
Scan Shows if the Air Monitor is performing scanning.
Status If the scan column displays a status of Up, the AP or AM is active
Updates Number of updates the AP or AM sent to the WMS database since the controller was last reset.
Reqs Number of database update requests that have not yet been added into the database.
Stats Total number of statistics updates sent to the database.