Reference Guide

Table Of Contents
1170 | voice rtcp-inactivity Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
voice rtcp-inactivity
voice rtcp-inactivity {enable | disable}
Description
This command enables or diables the RTCP inactivity timer.
Syntax
Usage Guidelines
You can enable the RTCP inactivity timer to clear a voip session if an on-hold client moves out of the coverage
area.
Example
The following command enables the RTCP inactivity timer:
(host) (config) #voice rtcp-inactivity enable
Command History
Command Information
Parameter Description
enable Enables the RTCP inactivity timer.
disable Disables the RTCP inactivity timer.
Version Description
ArubaOS 5.0 The rtcp-inactivity parameter was introduced to the voip command.
ArubaOS 6.0 This was part of the voip command in the earlier version. voip command is now
deprecated.
Platforms Licensing Command Mode
All platforms This command requires the PEFNG
license
Config mode on master controller