Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide whitelist-db cpsec delete | 1188
whitelist-db cpsec delete
whitelist-db cpsec delete mac-address <mac-address>
Description
Remove an individual AP entry to the campus AP whitelist.
Syntax
Usage Guidelines
Use this command to remove an individual whitelist entries for an AP that has been either removed from the
network, or is no longer a candidate for automatic certificate provisioning. If the AP whose entry you deleted is
still connected to the network and the control plane security feature is configured to send certificates to all APs
(or a range of addresses that include that AP), then the controller will send the AP another certificate, and the AP
will reappear in the campus whitelist. To permanently revoke a certificate from an invalid or suspected rogue AP,
use the command whitelist-db cpsec revoke.
Example
The following command removes an AP with the MAC address 10:14:CA:AF:3E:E1 from the campus AP
whitelist.:
(host) (config) #whitelist-db cpsec delete mac-address 10:14:CA:AF:3E:E1
Related Commands
Command History
This command was introduced in ArubaOS 5.0.
Command Information
Parameter Description
mac-address <mac-address> MAC address of the AP you want to remove from the campus AP whitelist.
Command Description Mode
show whitelist-db cpsec Show the campus AP whitelist for the control plane feature. Enable mode
Platforms Licensing Command Mode
All platforms Base operating system. Config mode on master or local controllers