Reference Guide

Table Of Contents
120 | ap wipe out flash Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
ap wipe out flash
ap wipe out flash
ap-name <ap-name>
ip-addr <ip-addr>
Description
Overwrite the entire AP compact flash, destroying its contents (including the current image file).
Syntax
Usage Guidelines
Use this command only under the supervision of Dell technical support. If you delete the current image in the
AP’s flash memory, the AP will not function until you reload another image.
Command History
This command was introduced in ArubaOS 3.3.2.
Command Information
Parameter Description Range Default
ap-name Wipe out the flash of the AP with the specified name.
ip-addr Wipe out the flash of the AP with the specified IP address.
Platforms Licensing Command Mode
All platforms running ArubaOS
3.3.2.x-FIPS or later.
Base operating system Config mode on master controllers