Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide ap-rename | 126
ap-rename
ap-rename {ap-name <name>|serial-num <num>|wired-mac <macaddr>} <new-name>
Description
This command changes the name of an AP to the specified new name.
Syntax
Usage Guidelines
An AP name must be unique within your network.
Example
The following command renames an AP:
(host) (config) #ap-rename wired-mac 00:0f:1e:11:00:00 building3-lobby
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Parameter Description
ap-name Current name of the AP.
serial-num Serial number of the AP.
wired-mac MAC address of the AP.
<new-name> New name for the AP. The name must be 1-63 characters.
NOTE: You cannot use quotes (“) in the AP name.
Note: This command automatically reboots the AP.
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config mode on master controllers