Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide apflash | 128
apflash
apflash {ap-name <name>|ip-addr <ipaddr>|wired-mac <macaddr>} [backup-partition]
[server <ipaddr>]
Description
This command reflashes the specified AP.
Syntax
Usage Guidelines
This command directs an AP to download its image from the controller. You should not normally need to run this
command, since APs automatically download their images from a controller during bootup.
Example
The following command reflashes a specific AP:
(host) (config) #apflash ap-name Building3-Lobby
Command History
This command was introduced in ArubaOS 3.0.
Command Information
Parameter Description
ap-name Reflash the AP with the specified name.
ip-addr Reflash the AP at the specified IP address.
wired-mac Reflash the AP at the specified MAC address.
server IP address of the FTP server.
Platforms Licensing Command Mode
All platforms Base operating system Enable and Config modes on master controllers