Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide dir | 180
dir
dir
Description
This command displays a list of files stored in the flash file system.
Syntax
No parameters.
Usage Guidelines
Use this command to view the system files associated with the controller.
Output from this command includes the following:
z The first column contains ten place holders that display the file permissions.
 First place holder: Displays - for a file or d for directory.
 Next three place holders: Display file owner permissions: r for read access, w for write access permissions,
x for executable.
 Following three place holders: Display member permissions: r for read access or x for executable.
 Last three place holders: Display non-member permissions: r for read access or x for executable.
z The second column displays the number of links the file has to other files or directories.
z The third column displays the file owner.
z The fourth column displays group/member information.
z The remaining columns display the file size, date and time the file was either created or last modified, and the
file name.
Example
The following command displays the files currently residing on the system flash:
(host) #dir
The following is sample output from this command:
-rw-r--r-- 1 root root 9338 Nov 20 10:33 class_ap.csv
-rw-r--r-- 1 root root 1457 Nov 20 10:33 class_sta.csv
-rw-r--r-- 1 root root 16182 Nov 14 09:39 config-backup.cfg
-rw-r--r-- 1 root root 14174 Nov 9 2005 default-backup-11-8-05.cfg
-rw-r--r-- 1 root root 16283 Nov 9 12:25 default.cfg
-rw-r--r-- 1 root root 22927 Oct 25 12:21 default.cfg.2006-10-25_20-21-38
-rw-r--r-- 2 root root 19869 Nov 9 12:20 default.cfg.2006-11-09_12-20-22
Command History
Introduced in ArubaOS 1.0
Command Information
Platform License Command Mode
Available on all platforms Available in the base operating system Enable and Config modes on local or
master controllers