Reference Guide

27 | aaa authentication mgmt Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
aaa authentication mgmt
aaa authentication mgmt
default-role {guest-provisioning|location-api|network-operations|no-access|read-
only|root}
enable
no ...
server-group <group>
Description
This command configures authentication for administrative users.
Syntax
Usage Guidelines
If you enable authentication with this command, users configured with the mgmt-user command must be
authenticated using the specified server-group.
You can configure the management authentication profile in the base operating system or with the PEFNG
license installed.
Example
The following example configures a management authentication profile that authenticates users against the
controller’s internal database. Users who are successfully authenticated are assigned the read-only role.
aaa authentication mgmt
default-role read-only
server-group internal
Parameter Description Range Default
default-role Select a predefined management role to assign to
authenticated administrative users:
— default
default Default superuser role
guest-
provisioning
Guest provisioning role
location-api Location API role
network-
operations
Network operations role
no-access No commands are accessible for this role
read-only Read-only role
enable Enables authentication for administrative users. enabled|
disabled
disabled
no Negates any configured parameter. — —
server-group
<group>
Name of the group of servers used to authenticate
administrative users. See “aaa server-group” on page 70.
— default