Reference Guide

260 | ip access-list mac Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
ip access-list mac
ip access-list mac {<number>|<name>}
deny {<macaddr>[<wildcard>]|any|host <macaddr>} [mirror]
no ...
permit {<macaddr>[<wildcard>]|any|host <macaddr>} [mirror]
Description
This command configures a MAC access control list (ACL).
Syntax
Usage Guidelines
MAC ACLs allow filtering of non-IP traffic. This ACL filters on a specific source MAC address or range of MAC
addresses.
If you configure the mirror option, define the destination to which mirrored packets are sent in the firewall policy.
For more information, see “firewall” on page 197.
Example
The following command configures a MAC ACL:
(host) (config) #ip access-list mac 700
deny 11:11:11:00:00:00
Command History
Parameter Description Range
mac Configures a MAC access list. Enter a name, or a number in the specified range. 700-799, 1200-1299
deny Reject the specified packets, which can be the following:
MAC address and optional wildcard
any: any packets
host: specify a MAC address
Optionally, you can configure the mirror parameter, which mirrors packets to a
datapath or remote destination.
—
no Negates any configured parameter. —
permit Allow the specified packets, which can be the following:
MAC address and optional wildcard
any: any packets
host: specify a MAC address
Optionally, you can configure the mirror parameter, which mirrors packets to a
datapath or remote destination.
—
Release Modification
ArubaOS 3.0 Command introduced
ArubaOS 3.3 The mirror parameter was introduced.