Reference Guide

266 | ip cp-redirect-address Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide
ip cp-redirect-address
ip cp-redirect-address <ipaddr> | disable
Description
This command configures a redirect address for captive portal.
Syntax
Usage Guidelines
This command redirects wireless clients that are on different VLANs (from the controller’s IP address) to the
captive portal on the controller.
If you have the Next Generation Policy Enforcement Firewall (PEFNG) license installed in the controller, modify
the captive portal session ACL to permit HTTP/S traffic to the destination cp-redirect-address <ipaddr> instead
of mswitch. If you do not have the PEFNG license installed in the controller, the implicit captive-portal-profile
ACL is automatically modified when you issue this command.
Example
The following command configures a captive portal redirect address:
(host) (config) #ip cp-redirect-address
Command History
Introduced in ArubaOS 3.0
Command Information
Parameter Description
<ipaddr> Host address with a 32-bit netmask. This address should be routable from all external networks.
disable Disables automatic DNS resolution for captive portal.
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers