Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide ip mobile trail | 285
ip mobile trail
ip mobile trail {host IP address | host MAC address}
Description
This command configures the capture of association trail for all devices.
Syntax
Usage Guidelines
A device can move from one home agent to another or between home agents. When the client makes an
association, the agent can store information about the client and registration time. The association trail can be
captured for devices even when mobility is disabled.
Example
The following command configures trail capture for a client using its IP address:
(host) (config) #ip mobile trail 1.2.3.4
Command History
This command was available in ArubaOS 3.0.
Command Information
Parameter Description Default
Host IP address The IP address of the client for which the association trail is captured. disabled
Host MAC address The MAC address of the client for which the association trail is captured. disabled
Platform License Command Mode
Available on all platforms Available in the base operating system. Config mode on master controllers