Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide aaa authentication via connection-profile | 34
Syntax
Parameter Description Default
allow-user-disconnect Enable or disable users to disconnect their VIA sessions. on
auth-profile <auth-profile> This is the list of VIA authentication profiles that will be
displayed to users in the VIA client.
auto-login Enable or disable VIA client to auto login and establish a
secure connection to the controller.
Enabled
auto-upgrade Enable or disable VIA client to automatically upgrade when an
updated version of the client is available on the controller.
Enabled
client-logging Enable or disable VIA client to auto login and establish a
secure connection to the controller.
Enabled
client-netmask <client-
netmask>
The network mask that has to be set on the client after the VPN
connection is established.
255.255.255.255
client-wlan-profile <client-
wlan-profile>
A list of VIA client WLAN profiles that needs to be pushed to
the client machines that use Windows Zero Config (WZC) to
configure or manage their wireless networks.
position <position>
clone Create a copy of connection profile from an another VIA
connection profile.
controller z Address: This is the public IP address or the DNS
hostname of the VIA controller. Users will connect to
remote server using this IP address or the hostname.
z Internal IP Address: This is the IP address of any of the
VLAN interface IP addresses belongs to this controller.
z Description: This is a human-readable description of the
controller.
addr <addr>
<internal-ip <internal-ip>
desc <description>
csec-gateway-url Specify the content security service providers URL here. You
must provide a fully qualified domain name.
csec-http-ports Specify the ports (separated by comma) that will be monitored
by the content security service provider.
Do not add space before or after the comma.
dns-suffix-list <dns-suffix-
list>
The DNS suffix list (comma separated) that has be set on the
client once the VPN connection is established.
.
None
enable-csec Use this option to enable the content security service.
ext-download-url <ext-
download-url>
End users will use this URL to download VIA on their
computers.
ike-policy <ike-policy> List of IKE policies that the VIA Client has to use to connect to
the controller.
ipsec-cryptomap List of IPSec Crypto Map that the VIA client uses to connect to
the controller. These IPSec Crypto Maps are configured in CLI
using the crypto-local ipsec-map <ipsec-map-
name> command.
map <map>
number <number>
max-reconnect-attempts <max-
reconnect-attempts>
The maximum number of re-connection attempts by the VIA
client due to authentication failures.
3
max-timeout value <value> The maximum time (minutes) allowed before the VIA session is
disconnected.
1440 min
save-passwords Enable or disable users to save passwords entered in VIA. Enabled