Reference Guide

Table Of Contents
Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide lacp system-priority | 299
lacp system-priority
lacp system-priority <priority_value>
Description
Configure the LACP system priority.
Syntax
Usage Guidelines
Set the LACP system priority.
Related Command
Command History
Command Information
Parameter Description
<priority_value> Enter the system priority value. The higher the value number the lower the priority.
Range: 1 to 65535
Default: 32768
Command Description
lacp group Enable LACP and configure on the interface
lacp port-priority Set the LACP port priority
show lacp View the LACP configuration status
show lacp sys-id View the LACP system ID information
show interface port-channel View information on a specified port channel interface
Release Modification
ArubaOS 3.4.1 Command introduced
Platforms Licensing Command Mode
All Platforms Base operating system Configuration Mode (config) for Master and
Local controllers