Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide localip | 302
localip
localip <ipaddr> ipsec <key>
Description
This command configures the IP address and preshared key for the local controller on a master controller.
Syntax
Usage Guidelines
Use this command on a master controller to configure the IP address and preshared key for communication with
a local controller. On the local controller, use the masterip command to configure the IP address and preshared
key for the master controller.
Example
The following command configures the local controller on a master controller:
(host) (config) #localip 0.0.0.0 ipsec gw1234xyz
Command History
Introduced in ArubaOS 3.0
Command Information
Parameter Description
<ipaddr> IP address of the local controller. Use the 0.0.0.0 address to configure a global preshared key
for all inter-controller communications.
ipsec Preshared key, which must be between 6-64 characters.
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers