Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide logging | 325
logging
logging <ipaddr>
[facility] |
[severity] |
[type>]
Description
Use this command to specify the IP address of the remote logging server, facility, severity, and the type.
Syntax
Usage Guidelines
The local use facilities (local0, local1, local2, local3, local4, local5, local6, and local7) are not reserved for specific
message-generating sources, and can be used for sending syslog messages. Use the
show logging command to
verify that the device sends logging messages.
Example
The following command adds the remote logging server with the IP address 10.1.2.3 with a user log type using
local4.
(host) (config) #logging 1.1.1.1 user facility local4
Command History
Introduced in ArubaOS 6.0
Command Information
Parameter Description Range Default
facility To set the remote logging server facility. local 0 to
local7
—
severity To set the remote logging server severity. — —
type To set the remote logging server message type. — —
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers