Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide remote-node-localip | 380
remote-node-localip
localuserdb
remote-node-localip <remote-node-switch-ip> ipsec KEY <keyword>
Description
This command configures the switch-IP address and preshared key for the local Remote Node on a master
Remote Node.
Syntax
Usage Guidelines
Use this command on a master remote node to configure the switch-IP address and preshared key for
communication with a local remote node. On the local remote node, the pre-shared key is configured in the setup
wizard during the initial boot. The pre-shared keys for both the master and local controllers must match.
On the local remote node, use the remote-node-masterid command to configure the switch-IP address and
preshared key for the master remote node.
Example
The following command configures the local remote node on a master remote node:
(host) (config) remote-node-localip 172.16.0.254 ipsec rhyopevs
Command History
Introduced in ArubaOS 6.0
Command Information
Parameter Description
<remote-node-switch-
ip>
Switch-IP address of the local remote node. Use the 0.0.0.0 address to configure a global
preshared key for all inter-controller communications.
ipsec <keyword> Preshared key, which must be between 6-64 characters.
Platform License Command Mode
Available on all platforms Available in the base operating system Config mode on master controllers