Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide rf optimization-profile | 414
rf optimization-profile
rf optimization-profile <profile-name>
clone <profile>
handoff-assist
low-rssi-threshold <number>
no ...
rssi-check-frequency <number>
rssi-falloff-wait-time <seconds>
Description
This command configures the RF optimization profile.
Syntax
Example
The following command configures an RF optimization profile:
(host) (config) #rf optimization-profile Helen1
(host) (RF Optimization Profile "Helen1") #rssi-falloff-wait-time 3
(host) (RF Optimization Profile "Helen1") #rssi-check-frequency 2
Parameter Description Range Default
<profile-name> Name of this instance of the profile. The name must be 1-63
characters.
— “default”
clone Name of an existing optimization profile from which
parameter values are copied.
——
handoff-assist Allows the controller to force a client off an AP when the
RSSI drops below a defined minimum threshold.
—disabled
low-rssi-threshold Minimum RSSI, above which deauth should never be sent. 1-255 0
no Negates any configured parameter. — —
rssi-check-frequency Interval, in seconds, to sample RSSI. 9-255 0 seconds
rssi-falloff-wait-
time <seconds>
Time, in seconds, to wait with decreasing RSSI before
deauth is sent to the client. The maximum value is 8
seconds.
0-8 0 seconds