Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show aaa authentication stateful-dot1x | 435
show aaa authentication stateful-dot1x
show aaa authentication stateful-dot1x [config-entries]
Description
This command displays configuration settings for 802.1x authentication for clients on non-Dell APs.
Syntax
Usage Guidelines
Issue this command to identify the default role assigned to the 802.1x user group, name of the group of RADIUS
servers used to authenticate the 802.1x users, and the 802.1x authentication timeout period, in seconds.
Example
The output of the following example displays 802.1x authentication information for your controller.
The output of this command includes the following parameters:
When you include the config-entries parameter, the output shows the AP - Server Configuration List.
Parameter Description
config-entries Display details for the AP Server configuration list.
Parameter Description
Default Role This parameter shows which role the controller uses for 802.1x authentication management.
Server Group The name of a server group.
Timeout Timeout period for an authentication request, in seconds.
Mode The Mode parameter indicates whether or not this feature is enabled or disabled.
(host) #show aaa authentication stateful-dot1x
Stateful 802.1X Authentication Profile
--------------------------------------
Parameter Value
--------- -----
Default Role guest
Server Group newgroup2
Timeout 10 sec
Mode Enabled
(host) #show aaa authentication stateful-dot1x config-entries
AP-Server Configuration List
----------------------------
Cfg-Name AP-IP Server Shared-Secret
-------- ----- ------ -------------
cfg22 10.3.14.6 RADIUS1 secret-pwd