Reference Guide

Dell PowerConnect ArubaOS 6.0 Command Line Interface | Reference Guide show ap database | 556
Usage Guidelines
Many of the parameters in this command can be used together to filter a large database of information down to
just the AP data you want to see. For example, you can issue the command show ap database group <group>
local status up to view a list of local APs within a specific AP group that are reporting an up status. Include the
sort-by and sort-direction keywords to specify how the data is sorted in the output of this command.
Examples
The output of the command show ap database shows the controller’s database of information for APs in the
group default. The output also includes a description of the flag types that may appear in the Flags column.
Related Commands
Command History
Introduced in ArubaOS 3.0.
Command Information
Command Description Mode
show ap database-summary To display a more general summary overview of the AP
registered to a controller, use the command show ap
database-summary.
Enable and Config
modes
Platforms Licensing Command Mode
All platforms Base operating system Enable or Config mode on master controllers
show ap database group default
AP Database
-----------
Name Group AP Type IP Address Status Flags Switch IP
---- ----- ------- ---------- ------ ----- ---------
3.125.141112 default 125 192.0.2.12 Up 1h:48m:27s 10.4.97.4
3.125.142113 default 125 192.0.2.12 Up 1h:43m:6s 10.4.97.6
3.125.242115 default 125 192.0.2.13 Up 1h:41m:18s 10.4.97.10
3.60.161112 default 60 192.0.2.14 Up 1h:43m:20s 10.4.97.4
3.60.202108 default 60 192.0.2.15 Up 8h:7m:4s R 10.4.97.4
3.61.101100 default 61 192.0.2.16 Up 7h:32m:13s R 10.4.97.4
3.61.161113 default 61 192.0.2.17 Up 1h:43m:20s 10.4.97.4
3.65.101117 default 65 192.0.2.18 Up 8h:39m:7s R 10.4.97.4
3.65.121108 default 65 192.0.2.29 Up 1h:55m:14s 10.4.97.4
3.65.292112 default 65 192.0.2.32 Up 1h:43m:42s 10.4.97.10
3.70.102116 default 70 192.0.2.43 Up 8h:23m:17s R 10.4.97.4
3.70.131107 default 70 192.0.2.44 Up 1h:55m:10s 10.4.97.4
3.70.172103 default 70 192.0.2.56 Up 1h:42m:24s 10.4.97.6
3.85.152116 default 85 192.0.2.57 Up 1h:42m:56s 10.4.97.6
3.85.252117 default 85 192.0.2.58 Up 1h:43m:18s 10.4.97.10
AP-61-20 default 61 192.0.2.59 Up 21m:36s o 10.3.47.189
Flags: U = Unprovisioned; N = Duplicate name; G = No such group; L = Unlicensed
R = Remote AP; I = Inactive; X = Maintenance Mode; P = PPPoE AP
S = RFprotect Sensor; d = Disconnected Sensor; H = Using 802.11n license
M = Mesh node; Y = Mesh Recovery i = Indoor; o = Outdoor
Total APs:15